• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.17-19
• /
• 2005

Variety of methods were discussed to reduce the cogging force in tubular permanent magnet type linear single phase AC generator. In paticular, the proposed methods depend on the variations of the permanent magnet construction. These methods Include two approaches in the form of sloped magnets, and conical magnets in addition to the conventional method of varying the magnet length. The undesired cogging force ripples were calculated by a two dimensional Finite Element Method(FEM). Moreover, the generated electromotive force in the stator coils was calculated fur each configuration of the permanent magnet. The experimental results agreed well with those obtained from the FEM-based simulations. Sufficient reduction in the cogging force was achieved over the range of 40% while the root mean square of the output voltage was maintained. It was found that the sloping the permanent magnet decreased the cogging force and at the same time increased the generated rms voltage of the AC generator. The performance of the designed linear AC generator was evaluated in terms of its efficiency, total weight, losses, and power to weight ratio.

• 한국해양환경ㆍ에너지학회지
• /
• 제18권4호
• /
• pp.254-262
• /
• 2015

가동 물체형 점흡수식 반구형 파력발전장치의 수면하 형상에 대한 매개변수 연구를 수행하였다. 매개변수로는 반구의 반지름과 흘수를 사용하였고, 각 조건에 따른 반구의 상하운동응답을 분석하여 최적의 반지름과 흘수사이의 관계를 추정하였다. 또한 최대 파력 에너지를 추출하기 위해 PTO 시스템으로 인한 추가 감쇠 계수를 부유체의 방사 감쇠 계수와 동일하게 지정하였다. 부유체의 운동응답 스펙트럼과 추출 파워 스펙트럼을 입사파 스펙트럼 첨두 주파수의 변화에 따라 구하였다. 이를 통해, 가용 파 에너지 추출량의 첨두 주파수가 입사파 스펙트럼의 첨두 주파수보다 약 20% 클 때, 최대 파워 실효치를 갖는 것을 알 수 있었다.

• Nuclear Engineering and Technology
• /
• 제52권12호
• /
• pp.2709-2716
• /
• 2020

Compositions of large nuclear cores (e.g. boiling water reactors) are highly heterogeneous in terms of fuel composition, control rod insertions and flow regimes. For this reason, they usually lack high order of symmetry (e.g. 1/4, 1/8) making it difficult to estimate their neutronic parameters for large spaces of possible loading patterns. A detailed hyperparameter optimization technique (a combination of manual and Gaussian process search) is used to train and optimize deep neural networks for the prediction of three neutronic parameters for the Ringhals-1 BWR unit: power peaking factors (PPF), control rod bank level, and cycle length. Simulation data is generated based on half-symmetry using PARCS core simulator by shuffling a total of 196 assemblies. The results demonstrate a promising performance by the deep networks as acceptable mean absolute error values are found for the global maximum PPF (~0.2) and for the radially and axially averaged PPF (~0.05). The mean difference between targets and predictions for the control rod level is about 5% insertion depth. Lastly, cycle length labels are predicted with 82% accuracy. The results also demonstrate that 10,000 samples are adequate to capture about 80% of the high-dimensional space, with minor improvements found for larger number of samples. The promising findings of this work prove the ability of deep neural networks to resolve high dimensionality issues of large cores in the nuclear area.

• 한국응용곤충학회지
• /
• 제40권2호
• /
• pp.105-109
• /
• 2001

귤응애의 예찰방법을 개발하기 위하여 제주지역의 온주밀감원에서 귤응애 분산형태에 대해 2개년(1999~2000년)에 걸쳐 잎 표본에 대하여 각 조사일에 평균밀도를 조사하였다. Taylor's power law와 Iwao's patchiness regression을 이용하여 분산지수를 비교하였으며, 잎 표본 조사에서는 일반적으로 Taylor's power law가 Iwao's patchiness regression보다 평균-분산 관계를 더 잘 나타내었다. Taylor's power law의 기울기와 절편은 조사한 포장 간에 차이가 없었으며, 여기에서 얻어진 상수값을 이용하여 잎 표본 조사에 의한 귤응애 약 .성충에 대한 고정정확도수준에서의 표본조사법을 개발하였다. 이 조사법에 대해 resampling 기법을 이용하여 독립된 4개의 조사자료를 이용하여 분석한 결과 실질 고정정확도(D)값이 요구되는 D값보다 항상 낮았으며, 나무당 귤응애 밀도가 8마리 이상에서 필요한 조사 나무수는 18주보다 작았다.

• 한국전자파학회논문지
• /
• 제13권6호
• /
• pp.538-545
• /
• 2002

OFDM 통신 시스템에서는 피크전력 대 평균전력비(Peak to Average Power Ratio, PAPR)가 커짐에 따라 전력증폭기에서 비선형 왜곡이 발생되므로 이를 포함한 전송 성능평가가 중요하다. 본 논문에서는 전력증폭기에서 비선형 왜곡이 있는 OFDM 시스템의 성능을 평가하는 새로운 혼합 분석기법을 제안한다. 즉, 제안된 혼합 분석기법은 시뮬레이션을 이용하여 먼저 PAPR의 확률밀도함수와 비선형 잡음의 분산과 평균을 구하고, 이를 이용하여 해석적(analytical) 방법으로 전체 BER을 구하는 방법이다. QPSK 또는 16-QAM 변조방식의 OFDM 시스템에서, 반도체전력증폭기(Solid-State-Power Amplifier, SSPA)의 등가모델을 적용하고, PAPR을 파라미터로 사용하여 IBO 크기에 따른 BER을 분석한다. 제안 방법이 기존의 Monte-Carlo 시뮬레이션에 의한 BER과 거의 동일한 분석 결과를 보이고, 기존 방법보다 BER곡선을 얻는데 필요한 시간이 상당히 감소됨을 보인다

• Steel and Composite Structures
• /
• 제38권1호
• /
• pp.17-31
• /
• 2021

Post-earthquake fire is a common disaster which causes serious safety issues to infrastructures. This study aims to investigate the residual loading capacities of circular concrete-filled steel tube (CFST) columns under post-earthquake fire experimentally and numerically. The experimental programme contains two loading steps - pre-damage cyclic loading at room temperature and transient state tests with constant compression loads. Three finite element models are developed and validated against the test results. Upon validation, a total of 48 numerical results were generated in the parametric study to investigate the effects of thickness and strengths of steel tube, axial compression ratio and damage degree on the fire resistance of circular CFST columns. Based on the analysis on experimental and numerical results, the loading mechanism of circular CFST columns is discussed. A design method is proposed for the prediction of fire resistance time under different seismic pre-damage and compression loads. The predictions by the new method is compared with the newly generated experimental and numerical results and is found to be accurate and consistent with the mean value close to the unity and a coefficient of variation around 1%.

• Wind and Structures
• /
• 제36권3호
• /
• pp.161-174
• /
• 2023

The analytical model of tornado vortices plays an essential role in tornado wind description and tornado-resistant design of civil structures. However, there is still a lack of guidance for the selection and application of tornado analytical models since they are different from each other. For single-cell tornado vortices, this study conducts a comparative study on the velocity characteristics of the analytical models based on numerically simulated tornado-like vortices (TLV). The single-cell stage TLV is first generated by Large-eddy simulations (LES). The spatial distribution of the three-dimensional mean velocity of the typical analytical tornado models is then investigated by comparison to the TLV with different swirl ratios. Finally, key parameters are given as functions of swirl ratio for the direct application of analytical tornado models to generate full-scale tornado wind field. Results show that the height of the maximum radial mean velocity is more appropriate to be defined as the boundary layer thickness of the TLV than the height of the maximum tangential mean velocity. The TLV velocity within the boundary layer can be well estimated by the analytical model. Simple fitted results show that the full-scale maximum radial and tangential mean velocity increase linearly with the swirl ratio, while the radius and height corresponding to the position of these two velocities decrease non-linearly with the swirl ratio.

• International Journal of Precision Engineering and Manufacturing
• /
• 제7권1호
• /
• pp.9-12
• /
• 2006

A spectral analysis and numerical simulation are employed to assess the effects of the stylus tip radius on measuring surface profiles. Original profiles with fractal spectral densities are generated and then are numerically traced with circular tipped stylus. Instead of their spectral densities, the accumulative power spectrums of traced profiles are analyzed. It is shown that the minimum wavelength of traced profile relates directly to the radius r of the stylus tip and the root-mean-square (rms) roughness ${\sigma}_o$ of original profile. From this accumulation spectral analysis, a formula is developed to estimate the minimum wavelength of traced profile. By using the concept of the minimum wavelength, an appropriate stylus tip radius can be chosen for the given rms roughness ${\sigma}_o$ of the profile.

• 한국자동차공학회논문집
• /
• 제9권1호
• /
• pp.57-62
• /
• 2001

EFI system has severe problems of heavy HC emission generated by large fuel droplets and non-uniform air-fuel mixture. Therefore, various atomization techniques are being developed in order to reduce HC emission. The one among those techniques is ar shrouded injector, which has better atomization ability and demands less power loss than other atomizers. Thus, the development of this air shrouded injector can be major topic to cope with international emission regulation. Nevertheless, there are few domestic and foreign studies which deal with air shrouded injector. In this study, the spray characteristics and atomization mechanism of the representative air shrouded injector were analyzed using PDPA system. From experimental results, the definite standards of air shrouded injector's spray characteristics were established.

• 천문학논총
• /
• 제13권1호
• /
• pp.31-37
• /
• 1998

The size of fine structures in the quiescent prominence that appeared on August 16, 1992 has been estimated using power spectra generated from intensity variations of Ha images of the lower part of the prominence, which were taken with a G1 CCD camera attached to 25cm coronagraph at Norikura Coronal Station in Japan. The lower part of the prominence has shown a distinct intensity variation with optical thickness of $\tau=1\~5$. Our analysis yields a mean size of fine structures ranging from 350 km to 1,000 km, in good agreement with Hirayama(1985) and Zirker & Koutchmy(1989, 1991).