• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1034-1039
• /
• 2000

In turbo-machines operated at high speeds through gear speed increasers a precise coupled analysis of lateral and torsional vibrations is required to achieve highly reliable designs with low vibration and low noise levels, where the vibration coupling is due to the gear pair mesh stiffness. In this paper, applying the generalized coupled lateral-torsional finite element model of a gear pair element, has been analyzed a coupled lateral-torsional vibration of the prototype 800 RT turbo-chiller rotor-bearing system with a bull-pinion gear speed increaser. Results have shown that the coupled torsional natural frequencies have decreased due to the coupling effect of lateral vibration and particularly, the 2nd torsional natural frequency and its mode shape have had big changes. However, changes of lateral vibration characteristics have been noticed only at high lateral whirl natural frequencies above 15,000 rpm.

• 대한교통학회:학술대회논문집
• /
• 대한교통학회 1998년도 제34회 추계 학술발표회
• /
• pp.298-298
• /
• 1998

The delay on two-lane, Two-way roads is a very important factor which tends to cause relatively high driver loads and too much delay often leads to traffic accidents. In this study a generalized form of delay estimation model was developed based on constant slow moving vehicle speeds, 100% no-passing zone, and flat terrain highway sections. To validate the model, a comparison was made with John Morrall's SMV(Slow Moving Vehicle)model as well as with TWOPAS model. Also a sensitivity analysis was performed to check accuracy of the model. It was found that the model was easy to apply and yet provided reasonable results for experimental conditions specified in the study. It was recommended that speed calculation procedure of the model be improved by further studies, so that the effect of speed acceleration or deceleration according to highway geometries on delay could be analyzed more accurately.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.523-530
• /
• 2006

A rotordynamic analysis was performed with a dry vacuum pump, which is a major equipment in modern semiconductor and LCD manufacturing processes. The system is composed of screw rotors, lobes picking air, helical gears, driving motor, and support rolling element hearings of rotors and motor. The driving motor-screw rotor system has a rated speed of 6,300rpm, and was modeled utilizing a rotordynamic FE method for analysis, which was verified through the results of its 3-D finite element model. As loadings on the bearings due to the gear action were significant in the system considered, each resultant bearing load was calculated determinately and indeterminately by considering the generalized forces of the gear action as veil as the rotor itself. Each resultant hearing loading was used in calculating each stiffness of rolling element bearings. Design goals are to achieve wide separation margins of critical speeds and favorable unbalance responses of the rotor in the operating range. Then, a complex rotordynamic analysis of the system was carried out to evaluate its forward synchronous critical speeds, whirl natural frequencies and mode shapes, and unbalance responses under various unbalance locations. Results show that the entire system is well designed in the operating range. In addition, the procedure of rotordynamic analysis for dry vacuum pump rotor-bearing system was proposed and established.

• 한국항공우주학회지
• /
• 제38권1호
• /
• pp.1-11
• /
• 2010

압축성 실제 기제 유동 해석에 필수적인 음속의 정의에 대하여 다시 한 번 살펴보고, 열역학적으로 정의되는 음속(이하, 열역학 음속)과 특성 변수 해석을 통하여 정의되는 음속(이하, 고유 음속)을 일반화된 상태 방정식에 대하여 유도하였으며, 압력과 온도, 밀도가 선형적으로 비례하지 않는 실제 기체의 경우 열역학 음속과 특성 음속은 다소의 차이가 있음을 확인하였다. 이 과정에서 Roe의 근사 리만 해법을 다시 유도하여 실제 기체 효과의 수정이 필요한 부분을 살펴보았다. Roe의 근사 리만 해법과 AUSM 플럭스 분할 기법에 열역학적 음속과 특성 음속을 적용하여 비교한 경우 대체로 큰 차이는 없으나 특정한 경우 열역학 음속은 AUSM 방법의 경우 불안정성을 유발하기도 하였다. 수치 기법의 수학적 일관성의 측면에서도 특성 음속을 이용하는 것이 타당한 것으로 보인다. 이상의 방법은 다차원 문제에도 일관된 확장이 가능하였다.

• 한국유체기계학회 논문집
• /
• 제10권3호
• /
• pp.47-54
• /
• 2007

A rotordynamic analysis was performed with a dry vacuum pump, which is a major equipment in modem semiconductor and LCD manufacturing processes. The system is composed of screw rotors, lobes picking air, helical gears, driving motor, and support rolling element bearings of rotors and motor. The driving motor-screw rotor system has a rated speed of 6,300rpm, and was modeled utilizing a rotordynamic FE method for analysis, which was verified through the results of its 3-D finite element model. As loadings on the bearings due to the gear action were significant in the system considered, each resultant bearing load was calculated determinately and indeterminately by considering the generalized forces of the gear action as well as the rotor itself. Each resultant bearing loading was used in calculating each stiffness of rolling element bearings. Design goals are to achieve wide separation margins of critical speeds and favorable unbalance responses of the rotor in the operating range. Then, a complex rotordynamic analysis of the system was carried out to evaluate its forward synchronous critical speeds, whirl natural frequencies and mode shapes, and unbalance responses under various unbalance locations. Results show that the entire system is well designed in the operating range. In addition, the procedure of rotordynamic analysis for dry vacuum pump rotor-bearing system was proposed and established.

• 한국소음진동공학회논문집
• /
• 제25권7호
• /
• pp.487-495
• /
• 2015

A generalized special program called planetary transmission analysis(here in after PTA) is developed to improve planetary gear noise in automatic transmission. PTA is capable of analyzing any typical one-degree-of-freedom automatic transmission gear train containing any number of simple, compound or complex-compound planetary gear sets. The kinematics module in PTA can compute the rotational speeds of gears and carriers and calculate the order frequencies to predict the planetary noise components. The power flow analysis module performs a complete static force analysis providing forces, moments, or torques of gears, bearings, clutches and connections. Based on the given type and number of planetary gear sets, the search algorithm determines all possible kinematic configurations and gear tooth combinations in a required set of gear ratios, while eliminating whole kinematic redundancies and unfavorable clutching sequences. By using PTA program, planetary internal speeds of new developed automatic transmission are early obtained; therefore, possibility of the noise problem could be predicted in early design stage. As implementing PTA in planetary gear NVH development procedure, planetary gear noise was successfully reduced by 10 dBA.

• 한국소음진동공학회논문집
• /
• 제17권10호
• /
• pp.967-975
• /
• 2007

A rotordynamic analysis was performed with a dry vacuum pump, which is a major equipment in modern semiconductor and LCD manufacturing processes. The system is composed of screw rotors, lobes picking air, helical gears, driving motor, and support rolling element bearings of rotors and motor. The driving motor-screw rotor system has a rated speed of 6,300 rpm, and was modeled utilizing a rotordynamic FE method for analysis, which was verified through 3-D FE analysis and experimental modal analysis. As loadings on the bearings due to the gear action were significant in the system considered, each resultant bearing load was calculated by considering the generalized forces of the gear action as well as the rotor itself. Each resultant bearing loading was used in calculating each stiffness of rolling element bearings. Design goals are to achieve wide separation margins of lateral and torsional critical speeds, and favorable unbalance responses of the rotor in the operating range. Then, a complex rotordynamic analysis of the system was carried out to evaluate its forward synchronous critical speeds, whirl natural frequencies and mode shapes, unbalance responses under various unbalance locations, and torsional interference diagram. Results show that the entire system is well designed in the operating range. In addition, the procedure of rotordynamic analysis for dry vacuum pump rotor-bearing system was proposed and established.

• 한국인터넷방송통신학회논문지
• /
• 제18권3호
• /
• pp.77-82
• /
• 2018

본 논문은 가변 스텝 크기를 가지는 MSAG-GMMA(modified Stop-and-Go generalized multi modulus algorithm) 적응 블라인드 등화 알고리즘의 성능 분석에 관한 것이다. 제안한 알고리즘은 등화 계수 갱신 식에서 고정 스텝 크기에 결정지향 알고리즘의 오차신호의 크기를 곱하여 오차크기에 따라서 스텝 크기가 변하도록 하였다. 또한 결정지향 알고리즘의 오차신호의 크기를 판단하여 어느 임계값 이상에서는 정상상태로의 빠른 수렴 속도를 유지하도록 스텝 크기가 고정인 값을 가지는 MSAG-GMMA가 동작하고, 미만일 때는 스텝 크기가 가변되는 MSAG-GMMA가 동작하도록 하였다. 제안한 알고리즘의 성능을 평가하기 위하여 성능 지수로 앙상블 ISI, 앙상블-평균 MSE, 그리고 등화기의 출력으로 얻어지는 등화 후 신호점도를 사용하였다. 모의실험을 통하여 제안한 알고리즘이 MMA, GMMA, 그리고 MSAG-GMMA보다 빠른 수렴 속도와 정상상태에서 작은 잔류 오차를 가짐을 확인하였다.

• Wind and Structures
• /
• 제26권3호
• /
• pp.129-146
• /
• 2018

Extreme wind speed analysis has been carried out conventionally by assuming the extreme series data is stationary. However, time-varying trends of the extreme wind speed series could be detected at many surface meteorological stations in China. Two main reasons, exposure change and climate change, were provided to explain the temporal trends of daily maximum wind speed and annual maximum wind speed series data, recorded at Hangzhou (China) meteorological station. After making a correction on wind speed series for time varying exposure, it is necessary to perform non-stationary statistical modeling on the corrected extreme wind speed data series in addition to the classical extreme value analysis. The generalized extreme value (GEV) distribution with time-dependent location and scale parameters was selected as a non-stationary model to describe the corrected extreme wind speed series. The obtained non-stationary extreme value models were then used to estimate the non-stationary extreme wind speed quantiles with various mean recurrence intervals (MRIs) considering changing climate, and compared to the corresponding stationary ones with various MRIs for the Hangzhou area in China. The results indicate that the non-stationary property or dependence of extreme wind speed data should be carefully evaluated and reflected in the determination of design wind speeds.

• 대한토목학회논문집
• /
• 제32권1B호
• /
• pp.21-27
• /
• 2012

T. Linde가 제안한 HLLL 기법에서는 일반화된 엔트로피 함수의 도입으로 중앙파가 평가되므로 모든 파속이 초기 상태로부터 결정된다. HLLE 기법과 달리 Roe의 선형화 기법과 완전히 결별되고 HLLC 기법과 달리 정확해에 의존되지 않으므로 모태인 HLL 기법의 온전한 계승으로 볼 수 있다. 이 연구에서는 생성항이 없는 1차원 천수방정식에 농도와 관련된 보존변수를 추가한 지배방정식에 대해 총 에너지를 일반화된 엔트로피 함수로 두고 HLLL 기법을 적용하여 모형을 구성하였다. 정확해가 알려진 세 경우에 대해 모의한 결과, 1차 정확도 수치해의 한계에도 불구하고, 대체로 정확해와 잘 일치하였다. HLLL 기법은 그 외 HLL 형 기법에 비해 우수한 것으로 나타났다. 특히, 물이 빠져 바닥이 드러나는 경우에서 그 전선이 비교적 정확하게 포착되었다. 다만, 그 외 기법에 비해 계산 시간이 더 오래 걸리는 단점이 드러났다.