• Current Research on Agriculture and Life Sciences
• /
• v.15
• /
• pp.115-122
• /
• 1997

Grafting is an important skill for the stable supply and production of high quality. However, the shortage of skillful labor has become great difficulty for a mass production of grafting-seedling. In this study, a suitable mechanism for a grafting machine was developed. The following summarize the results of this study: 1. An insertion method was selected for mechanism of the grafting machine without bonding agent, clip, pin. This insertion-grafting method can be applicable to general vegetables and a mass production system. In addition to, this method is suitable for developing the grafting mechanism. 2. Growing point was removed while remaining both cotyledons on rootstock. The productivity of this system was five fold greater than the one of an experienced labor. 3. The rootstock processing was placed on left and scion processing unit was placed on right of the system, then processed rootstock and scion graft by rotating $180^{\circ}$. 4. The efficiency tests on mechanical grafting rate showed 98%.

• Journal of Drive and Control
• /
• v.16 no.4
• /
• pp.23-31
• /
• 2019

The purpose of this study was to evaluate the PTO severeness for an agricultural tractor during disk plow and rotary tillage. The PTO load measurement system was constructed with data acquisition and a PTO torquemeter. Field experiments were conducted at a combination of traveling speed (L3 Low, L3 High) and PTO speed (P1, P2). The load spectrum was generated using the rain-flow counting method, and the SWT method was used to consider the range and mean of the PTO load. The damage sum was calculated by applying a modified miner rule, which is a cumulative damage law. The relative severeness was expressed as the ratio of the lowest damage sum. Relative severeness was higher with the lower PTO gear stage, and higher driving gear stage and it was approximately 40-102 times higher for rotary tillage than disk plow tillage in the same gear stages. The relative severeness was 1010.12 in the rotary tillage under L3 High P1 based on the disk plow tillage under L3 Low P2.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.7
• /
• pp.751-757
• /
• 2012

An accelerated life test (ALT) is a test method that forces components to fail more quickly than they would under use conditions by applying higher overstresses. When two or more accelerating stresses are involved in an ALT, an interaction effect may occur. In previous studies, mostly ALTs without considering an interaction of accelerated stresses and accelerated life models were proposed. The life data obtained are extrapolated using a life-stress relationship to estimate the life distribution at use conditions. We use the general log-linear relationship to model the dependence of life in the Weibull distribution on stress. Therefore, this study suggests the acceleration factor model between the lives at use conditions and accelerated conditions by using mechanical component life data considering an interaction effect. Further, the accelerated life test method and acceleration factor model proposed in this paper will be the basis for adopting an accelerated life test with accelerated stress interactions.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.197-198
• /
• 2006

In the solid freeform fabrication (SFF) system using selective laser sintering (SLS), polyamide-12 powder is currently recognized as general material. In this study, some kinds of polyamide-6 powders with different shape and particlesize were fabricated to investigate the formability, the microstructure and mechanical properties. Also, to develop a more elaborate and rapid system, this study employs a new SLS device with a 3-axis dynamic focusing scanner system instead of the existing fe lens used in commercial SLS. Polyamide-6 powders having the average size of 100 m were treated thermally in order to keep the spherical symmetry in shape. These polyamide-6 powders were mixed with polyamide-12 powders having the average size of 50 m to give the bimodal distribution of size. These mixed powders showed the better fabrication in the selective laser sintering process because the smaller particles of polyamide-11 played an important role in the compact packing of powders by filling the void space between the large particles of polyamide-6. Also, Experiments have performed to evaluate the effect of a scanning path and sintering parameters by fabricating the various 3D objects.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.5
• /
• pp.475-482
• /
• 2014

The precision hydraulic valve is widely used in various industrial field like aircraft, automobile, and general machinery. Servo actuator is the most important device for driving the precise hydraulic valve. The reliable operation of servo actuator effects on the overall hydraulic system. The performance of servo actuator relies on frequency response and step response according to arbitrary input signal. In this paper, we performed the analysis for the components of servo actuator to satisfy the reliable operation and response characteristics through the reliability analysis, and also induced the design parameters to realize the reliable operation and fast response characteristics of servo actuator for hydraulic valve operation through the empirical knowledge of experts and electromagnetic theories. We suggested the design equations to determine the values of design parameters of servo actuator as like bobbin size, length of yoke and plunger and turn number of coil, and verified the achieved design values through FEM analysis and performance tests using some prototypes of servo actuators adapted in hydraulic valve.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.56 no.2
• /
• pp.138-146
• /
• 2020

Stow net fishery is one of the fishery with high fishing work accidents in southwestern sea of Korea. We conducted to serve as basic data for improving the healthy and safe working environment of fisher using risk assessment process (ISO45001) with fishermen's occupational accidents of the National Federation of Fisheries Cooperative (NFFC) from 2016 to 2018. The average occurrence rate of victim in this fishery was 9.04%, 16.7 times more than such rate in all industries. In addition, the average fatality rate was found to have a very serious level management to 31.06‱, 27.7 times more than such rate in all industries. The safety hazards of stow net fishery was more likely to occur by other general industrial groups, with more severe consequences after the accident. According to 4M analysis, 58.6% of all accidents were caused by human factors, 24.0% by environmental factors, 16.0% by mechanical factors, and 1.5% by managerial factors, respectively. The occurrence frequency by accident type was the highest in 187 cases (32.2%) for struck by object, 158 cases (27.2%) for slipping, and 94 cases (16.2%) for being in contact with machinery. Severity is the highest for others such as diseases etc., in the order of being struck by object, being in contact with machinery, falling from above slipping, collapsing, bumping, and burning. Being struck by object, being in contact with machinery, and slipping are high-risk groups, falling from above others, bumping, and burning are medium-risk groups based on the risk assessment using the occurrence frequency and severity of accident. The obtained results are expected to contribute to the safe operation environment subsidy for fishing crews on the stow net fishing vessel.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.455-458
• /
• 2008

The purpose of this study is to analyze technical manpower management problems that were made by specialized construction company, centering on the field of machinery and equipments, to offer an improvement of technical manpower management. For this study, the adapted research method select owners&foremans on 18 specialized construction company by machinery&equipment services and on-site supervisors on general contractor and then investigate the problem of contract and subcontract by survey. After analyzing the actual state of management, it present an improvement of technical manpower management. The results of this research are as follows. 1) It is analyzed foreman had a number of difficulty for dealing manpower management because of subordinate relationship between supervisor and foreman. 2) The improvement of technical manpower management is concluded that foreman is to be on- site proxy supervisor or to be hired by an annual salary.

• Journal of Drive and Control
• /
• v.19 no.4
• /
• pp.19-28
• /
• 2022

This paper introduces an automatic steering system for straight traveling capable of being mounted on drivable agricultural machinery which user can handle it such as a tractor, a transplant, etc. The modular automatic steering device proposed in the paper is composed of RTK GNSS, IMU, HMI, hydraulic valve, and wheel sensor. The path generation method of the automatic steering system is obtained from two location information(latitude and longitude on each point) measured by GNSS in advance. From HMI, a straight path(AB line) can be created by connecting latitude and longitude on each point and the device makes the machine able to follow the path. During traveling along the reference path, it acquires the real time position data every sample time(0.1s), compares the reference with them and calculates the lateral deviation. The values of deviation are used to control the steering angle of the machine using hydraulic valve mounted on the axle of front wheel. In this paper, Pure Pursuit algorithm is applied used in autonomous vehicles frequently. For the analysis of traveling characteristics, field tests were executed about these conditions: velocity of 2, 3, 4km/h which is applied to general agricultural work and ground surface of solid(asphalt) and weak condition(soil) such as farmland. In the case of weak ground state, two experiments were executed about no-load(without work) and load(with work such as plowing). The maximum average deviations were presented 2.44cm, 7.32cm, and 11.34cm during traveling on three ground conditions : asphalt, soil without load and with load(plowing).

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.1
• /
• pp.88-94
• /
• 2012

One of the effective ways to reduce both $NO_x$ and PM at the same time in a diesel CI engine is to operate the engine in low temperature combustion (LTC) regimes. In general, two strategies are used to realize the LTC operation-dilution controlled LTC and late injection LTC - and in this study, the former approach was used. In the dilution controlled regime, LTC is achieved by supplying a large amount of EGR to the cylinder. The significant EGR gas increases the heat capacity of in-cylinder charge mixture while decreasing oxygen concentration of the charge, activating low temperature oxidation reaction and lowering PM and $NO_x$ emissions. However, use of high EGR levels also deteriorates combustion efficiency and engine power output. Therefore, it is widely considered to use increased intake pressure as a way to resolve this issue. In this study, the effects of intake pressure variations on performance and emission characteristics of a single cylinder diesel engine operated in LTC regimes were examined. LTC operation was achieved in less than 8% $O_2$ concentration and thus a simultaneous reduction of both PM and $NO_x$ emission was confirmed. As intake pressure increased, combustion efficiency was improved so that THC and CO emissions were decreased. A shift of the peak Soot location was also observed to lower $O_2$ concentration while $NO_x$ levels were kept nearly zero. In addition, an elevation of intake pressure enhanced engine power output as well as indicated thermal efficiency in LTC regimes. All these results suggested that LTC operation range can be extended and emissions can be further reduced by adjusting intake pressure.

• Journal of Biosystems Engineering
• /
• v.16 no.1
• /
• pp.60-82
• /
• 1991

Drying process of red pepper is very important in terms of drying cost and quality of the end product. Recently, many studies on red pepper drying have been performed. Nevertheless, an optimum drying condition is not established yet. Drying characteristics of red pepper is much affected by drying factors such as variety and initial state of red pepper as well as by environmental drying factors such as temperature and relative humidity of drying air. Various varieties of red pepper are being cultivated and the initial state of red pepper at harvest is very ambiguous. For this reason, it is very costly and time-consuming to establish an optimum drying condition of red pepper by experiment. A general drying model to descirbe a drying process has not been developed due to diversity of drying characteristics of red pepper. This study was, therefore, performed to develop a general drying model describing a drying process of red pepper. The results from this study are summarized as follows. 1. A basic model was established to develop an appropriate mositure content model and temperature model describing a drying process of red pepper, and the basic model was validated with experimental data. 2. The bone dry weight of fruit and mositure content were accepted satisfactorily as parameter to define the arbitrary red pepper. 3. The equilibrium moisture content of red pepper was found out to be different according to the variety of red pepper, air temperature and relative humidity. Also, the EMC model was developed using the parameters of air temperature, relative humidity and bone dry weight of fruit. 4. A general drying model for red pepper was developed, parameters of which were expressed as the function of drying factors related with drying phenomena. The developed drying model was found out to describe well the drying process of red pepper.