Browse > Article
http://dx.doi.org/10.7839/ksfc.2019.16.4.023

Evaluation of PTO Severeness for 78 kW-Class Tractor According to Disk Plow Tillage and Rotary Tillage  

Kim, Wan Soo (Department of Biosystems Machinery Engineering, Chungnam National University)
Kim, Yong Joo (Department of Biosystems Machinery Engineering, Chungnam National University)
Park, Seong Un (Research and Development Institute, Tongyang Moolsan Co. Ltd.)
Hong, Soon Jung (Department of General Education, Korea National College of Agriculture and Fisheries)
Kim, Yeon Soo (Department of Biosystems Machinery Engineering, Chungnam National University)
Publication Information
Journal of Drive and Control / v.16, no.4, 2019 , pp. 23-31 More about this Journal
Abstract
The purpose of this study was to evaluate the PTO severeness for an agricultural tractor during disk plow and rotary tillage. The PTO load measurement system was constructed with data acquisition and a PTO torquemeter. Field experiments were conducted at a combination of traveling speed (L3 Low, L3 High) and PTO speed (P1, P2). The load spectrum was generated using the rain-flow counting method, and the SWT method was used to consider the range and mean of the PTO load. The damage sum was calculated by applying a modified miner rule, which is a cumulative damage law. The relative severeness was expressed as the ratio of the lowest damage sum. Relative severeness was higher with the lower PTO gear stage, and higher driving gear stage and it was approximately 40-102 times higher for rotary tillage than disk plow tillage in the same gear stages. The relative severeness was 1010.12 in the rotary tillage under L3 High P1 based on the disk plow tillage under L3 Low P2.
Keywords
Agricultural Tractor; Load Spectrum; Damage Sum; Relative Severeness;
Citations & Related Records
Times Cited By KSCI : 7  (Citation Analysis)
연도 인용수 순위
1 W. S. Kim et al., "Analysis of the load of a transplanter PTO shaft based on the planting distance", Journal of the Faculty of Agriculture, Kyushu University, Vol.63, No.1, pp.97-102, 2018.   DOI
2 G. H. Jung, "Gear train design of 8-speed automatic transmission for tractor", Journal of the Korean Society for Fluid Power and Construction Equipments, Vol.10, No.2, pp.30-36, 2013.
3 G. H. Jung, "Automatic transmission design analysis of the tractor from advanced company", Journal of the Korean Society for Fluid Power and Construction Equipments, Vol.10, No.4, pp.7-13, 2013.
4 S. M. Baek et al., "Analysis of equivalent torque of 78 kW agricultural tractor during rotary tillage", Journal of Korea Institute of Information, Electronics, and Communication Technology, Vol.12, No.4, pp.359-365, 2019.   DOI
5 W. S. Kim et al., "Analysis of the PTO torque of a transplanter by planting condition", Journal of Biosystems Engineering, Vol.41, No.4, pp.313-318, 2016.   DOI
6 ASABE, S313.3: Soil cone penetrometer, American Society of Agricultural and Biological Engineers, pp.832-833, 1999.
7 ASABE, EP542: Procedures for using and reporting data obtained with the soil cone penetrometer, American Society of Agricultural and Biological Engineers, pp.1052-1055, 1999.
8 K. S. Lee et al., "Physical Properties of Hardpan in Paddy fields", Journal of Biosystems Engineering, Vol.32, No.4, pp.207-214, 2007.   DOI
9 H. I. Kim et al., "Fatigue life evaluation of an actual structure under the irregular loading using an acceleration test", Proceedings of the KSPE 2004 Autumn Conference, pp.71-74, 2004.
10 J. A. Bannantine, J. J. Corner and J. L. Handrock, Fundamentals of metal fatigue analysis, Prentice Hall, New Jersey, 1990.
11 Standard data reference of economic analysis for agricultural science and technology in 2017, Rural Development Administration, 2017.
12 Agricultural Machinery Yearbook in Republic of Korea, Korea Agricultural Machinery Industry Cooperative and Korean Society for Agricultural Machinery, pp.139-142, 2018.
13 S. O. Chung et al., "Development of a hydraulic power transmission system for the 3-point hitch of 50-kW narrow tractors", Korean Journal of Agricultural Science, Vol.43, No.3, pp.450-458, 2016.   DOI
14 S. J. Lim et al., "Power Analysis of a 3-kW Class Motor-Driven Multipurpose Walking-Type Transplanter", Journal of Biosystems Engineering, Vol.44, No.3, pp.135-145, 2019.   DOI
15 T. H. Eom and C. H. Lee, "Minimization of Shifting Shock of Tractor PST using SimulationX", Journal of Drive and Control, Vol.15, No.3, pp.36-42, 2018.   DOI
16 W. S. Kim et al., "Work load analysis for determination of the reduction gear ratio for a 78 kW all wheel drive electric tractor design", Korean Journal of Agricultural Science, Vol.46, No.3, pp.613-627, 2019.   DOI
17 B. J. Cho et al., "Improved Design of Hydraulic Circuit of Front-end Loader for Bump Shock Reduction of an Agricultural Tractor", Journal of Drive and Control, Vol.13, No.2, pp.10-18, 2016.   DOI
18 Y. J. Kim et al., "Analysis of Power Requirement of Agricultural Tractor by Major Field Operation", Journal of Biosystems Engineering, Vol.36, No.2, pp.79-88, 2011.   DOI
19 K. H. Han, K. U. Kim and Y. G. Wu, "Severeness of transmission loads of agricultural tractor for rotary operations in poorly drained paddy field", Journal of Biosystems Engineering, Vol.24, No.4, pp.293-300, 1999.
20 J. H. Kim et al., "Severeness of transmission loads of agricultural tractors", Journal of Biosystems Engineering, Vol.23, No.5, pp.417-426, 1998.
21 Y. J. Kim et al., "Evaluation of tractor PTO severeness during rotary tillage operation", Journal of Biosystems Engineering, Vol.36, No.3, pp.163-170, 2011.   DOI