• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.37-42
• /
• 1997

Off-line feed rate scheduling is an advanced methodology to automatically determine optimum feed rates for the optimization of NC code. However, the present feed rate scheduling systems have lim~tations to generate the optimized NC codes because they use the material removal rate or non-generalized cutting force model. In this paper, a feed rate scheduling system based on an improved cutting force model that can predrct cutting forces exactly in general machining was presented. Original blocks of NC code were divided to small ones with the modified feed rates to adjust the peak value of cutting forces to a constant vale. The characteristic of acceleration and deceleration for a given machrne tool was considered when off-line feed rate scheduhng was performed. Software for the NC code optimization was developed and applied to pocket machining simulation.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.5
• /
• pp.425-429
• /
• 2007

A linear ultrasonic motor was designed by a combination of the longitudinal and bending mode. linear ultrasonic motors are based on an elliptical motion on the surface of elastic body, such as bar or plates. The corresponding eigen-mode of one resonance frequency can be excited twice at the same time with a phase shift of 90 degrees in space and time. That is excite symmetric and anti-symmetric modes. Then it determines the thrust and speed of the motor. Linear ultrasonic motors are investigated experimentally in according to be fabricated a general classification to motor structure and material characteristic. There was the first to simulate as use of finite element analysis ANSYS 9.0. The AL-T2W8-ARM14-LEG18-ANGLE80 motor has a maxim efficiency 18 % under the speed 0.14 m/s, thrust 345 gf and preload 280 gf, operating frequency is 57.6 kHz.

• Herbal Formula Science
• /
• v.11 no.1
• /
• pp.205-216
• /
• 2003

A general review is made on Insamyangwitang(人蔘養胃湯). Following conclusions are drawn from the clinical cases of Insamyangwitang in Hyungsang medicine. 1. Insamyangwitang is composed of four different prescriptions of Huisaentang, Sakoonjatang, Eajintang and Pyungwisan. Huisaentang is usually prescribed for the intestinal convulsion. Sakoonjatang for the deficiency of Ki. Eajintang for retention of phlegm. 2. Insamyangwitang is effective in strengthening the spleen, drying the dampness, warning the middle-warmer to stop vomiting, regulating the flow of Ki, and eliminating phlegm. 3. Insamyangwitang is applicable to malaria caused by cold, intestinal convulsion, abdominal mass, edema, tympanites, Yin syndrome of exogenous febrile disease, distension, lack of appetite, stomachache, and diarrhea. 4. Persons with the following characteristic in Hyungsang are more susceptible to Insamyangwitang : Jung type, Hyul type, fish type, Taium meridian type, white fat damp constitution, person with big mouth, and woman rather than man.

• Proceedings of the KIEE Conference
• /
• 2002.11b
• /
• pp.352-354
• /
• 2002

The sag is phenomenon that magnitude of load voltage temporarily decreases because of power system fault. If a certain equipment in industrial process have any trouble result from sag. it can cause utility to be charged for enormous economics loss. Therefore it need to analyze the characteristic of sag and then mitigation method for sags in distribution system in odor to increase reliability. This paper gives an overview of sags characteristic due to short circuit fault in distribution system and after a general discussion of the various forms mitigation, gives a sags mitigation method with concentrating on changing the distribution system like spot network, on-site generation.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.7 no.2
• /
• pp.141-148
• /
• 2003

Concrete surface is a part that resists chiefly to carbonation by carbonic acid gas, affluence of rainwater and air, deterioration by freezing thawing, salt damage by seawater, and other chemical erosion etc. Therefore, this research analyzed physical characteristic and durable characteristic of concrete eliminated glut water and bubble of concrete surface using CON-SILK that is permeated with dehydration. As a research result, concrete using CON-SILK was improved, in comparison with concrete using general formwork, in physical performance and durability of concrete, as surface hardness, carbonation resistivity, and salt content permeation resistivity etc. Therefore, we could know that it is effective to use CON-SILK in performance elevation of concrete surface.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.885-891
• /
• 2003

Effects of each acoustic property on absorption characteristics of polyester fiber materials has been studied in this paper. It would be impossible for us to measure effects of each acoustic property by experimental method since we cannot make sound-absorbing materials in which only one of the properties is changed. We have adopted a numerical prediction method to carry out parameter studies for each acoustic property. And to get a general behavior of acoustic performance of the materials, the numerical simulation has been repeated to several cases of different bulk density. Finally we have obtained frequency-dependent control factors in the absorption performance which gives us design capability of acoustic absorbing materials.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.04a
• /
• pp.83-88
• /
• 2013

The purpose of this study is to develop the algorithm for dynamic interaction analysis of submerged floating tunnel and vehicles. The dynamic behavior characteristic of submerged floating tunnel is certainly different with general structures, because the submerged floating tunnel is floating in the middle of water, and subjected to constant buoyance. Therefore the analyses in various aspects should be carried out to secure structural stability and practicality of structures. To conduct the dynamic interaction analysis, the structure is modeled by commercial FEM program ABAQUS to investigate modal characteristic. Also the added mass concept is applied to represent the inertial force by a fluid, and then dynamic interaction analyses are conducted with superposition method when the KTX is moving along the submerged floating tunnel. And the time histories are presented for vertical and lateral displacement at the center of the tunnel.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.05a
• /
• pp.66-69
• /
• 2002

In the ideal forming theory(1), which has been deviously developed as a direct method for optimizing forming process, material elements are required to deform following the minimum plastic work path (or the proportional true strain path). Besides the general theory(2,3), specific ideal forming theories have been developed for membrane sheet forming(4) as well as two-dimensional steady bulk forming(5-7). In this work, the ideal forming theory was successfully applied for non-steady bulk forming under the plane strain condition. Here, the shape change complying with the minimum plastic work path, was effectively described by developing a numerical code based on the characteristic method. Numerical results obtained for a specific industrial part also include the optimum pre-forming shape and its evolving shape change to the final shape as well as the boundary traction history.

• Water Engineering Research
• /
• v.3 no.1
• /
• pp.9-22
• /
• 2002

In general, two dimensionless numbers are used in predicting the front propagation rate of density currents: the densimetric Froude number and the dimensionless front velocity. The former expresses the front speed in terms of the characteristic length and reduced gravitational acceleration. Previous papers report that the range of this dimensionless number is wide. The other is the dimensionless front velocity, which is a function of the buoyancy flux per unit width. This paper presents the state of the art review of the dimensionless numbers for the front propagation rate of density currents. Values of the densimetric Froude number are found to be consistent when the proper characteristic length is used for normalization. Then, the densimetric Froude number and the dimensionless front velocity are compared by using the experimental data of density currents over a horizontal surface.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.3C no.5
• /
• pp.199-206
• /
• 2003

Numerical solutions to complex characteristic equations are quite often required to solve electromagnetic wave problems. In general, two traditional complex root search algorithms, the Newton-Raphson method and the Muller method, are used to produce such solutions. However, when utilizing these two methods, the choice of the initial iteration value is very sensitive, otherwise, the iteration can fail to converge into a solution. Thus, as an alternative approach, where the selection of the initial iteration value is more relaxed and the computation speed is high, Davidenko's method is used to determine accurate complex propagation constants for leaky circular symmetric modes in circular dielectric rod waveguides. Based on a precise determination of the complex propagation constants, the leaky mode characteristics of several lower-order circular symmetric modes are then numerically analyzed. In addition, no modification of the characteristic equation is required for the application of Davidenko's method.