• 한국지진공학회논문집
• /
• 제11권3호
• /
• pp.1-10
• /
• 2007

현수교 행어케이블의 장력은 현수교의 상태점검에 있어 중요한 요소이다. 현재 케이블의 장력 추정에는 여러 이론식에 의한 간접적인 방법들이 사용되고 있으며, 케이블의 가속도신호로부터 고유진동수를 측정한 후 고유진동수와 장력과의 관계로부터 케이블의 장력을 추정하는 진동법이 대표적이다. 하지만 운동방정식을 기반으로 하는 진동법은 휨강성의 영향이 큰 짧은 케이블의 장력추정에는 적합하지 않다. 본 논문에서는 10m 미만의 짧은 케이블에 대해서도 전기 가능한 새로운 장력 추정 방법으로 단변분탐색법과, 최적화 기법을 이용한 역해석 기법을 제시하였다. 이론에 대한 검증을 위해 국내에 사용 중인 광안대교 행어케이블을 대상으로, 역해석과 진동법에 의한 추정장력들과 설계장력을 상호 비교하였고, 이를 통해 역해석기법이 길이에 상관없이 장력추정에 유용하다는 결론을 얻었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 추계 학술논문 발표대회
• /
• pp.47-49
• /
• 2012

Under this study, the characteristics of concrete intensity condition following the curing method under the extremely low temperature environment have been contemplated, and as a result, in the event of insulation + heat cable curing, the intensity and accumulated temperature accomplishment period is required for two times of requiring initial frost damage prevention than the case of heating + heat insulation curing method due to the insufficient calories supplied in general.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.268-271
• /
• 2004

A strengthening technique for reinforced concrete beams using external unhanded reinforcement offers advantages in speed and simplicity of installation over other, established, strengthening techniques. The purpose of this paper is to investigate the capabilities of a new retrofitting technique, namely external prestressing out cable, for flexural strengthening of beams. The paper provides a general description of structural behavior of beams strengthened using the technique. Results of four physical tests on strengthened reinforced concrete beams are reported and compared. It is shown that the technique can provide greater strength enhancement to lightly reinforced sections and that provision of deflectors enhances efficiency.

• 산업공학
• /
• 제13권3호
• /
• pp.528-538
• /
• 2000

HLA is a general-purpose software architecture for distributed simulation designed to support a wide range of simulation approaches and application. The US DoD's HLA for modeling and simulation can certainly be regarded as the state of the art in distributed simulation. It is a mandatory standard for military simulation. The purpose of this paper is to describe applications of HLA/RTI in multiple domains across the manufacturing systems society. In many and large scale industrial systems, enormous data is generated, and is to be managed in an effective way. It needs a high performance common network library. Furthermore, it must satisfy the real function of system facilities as much as possible. The RTI is an implementation of the interface specification, provided as a set of services. Some applications focusing on the area of a small manufacturing system were demonstrated. The integration could be achieved using the HLA, together with interface modules for each of the subsystems. We have found that HLA/RTI are cable of meeting the functional requirements for a given system environment.

• 복식
• /
• 제2권
• /
• pp.51-64
• /
• 1978

In reviewing our costume history, it is noted that costume bas been used as a yard stick for symboliying various social status. During the Lee Dynasty in which confucianism was the predominant religion, costume color, design and its fabric varied distinctly according to class, sex, age, occasion, et al. As in other field of our culture, costume was influenced by the Chinese culture. Although gilding was derived from the Chinese-originated gold-spun fabrics, no credit and praise should be spared for our ancestors of the Lee Dynasty who developed gilding artistry as our own. The use of gilded costume was confined to the formal court wear rather than casual wear even in court and to the nobles than to the commoners. Even among the nobles, gilding designs variously classified were used to distinguish the class. However, the modernization triggered by fores-Japan Annexation Treaty destroyed the traditional cable systems, thereby the limited use of gilding has yielded to the vast demand on the part of general populace.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.161-164
• /
• 2006

This paper introduces a preliminary work for the design of a mini-dish cluster system for power general ion. Each mini-dish (typically has a 20 to 30cm in diameter) is designed with a simple parabolic profile, concentrating sun light (after the glass glazing cover to avoid dust deposition on the reflector and facilitate cleaning) onto a centrally located small plane(or concave) mirror which is placed on the bottom side of the transparent glass cover. The mirror with a mini-dish concentrator is designed to focus beam radiation onto a focal point before it enters a bundle of optical fibers connected to a remote receiver for power generation different options are considered In designing a mini-dish concentrator to maximize its effectiveness for the collection and use of solar energy.

• Nuclear Engineering and Technology
• /
• 제35권6호
• /
• pp.547-555
• /
• 2003

Fire hazard and risk analysis at Nuclear Power Plants is implemented on the basis of the normal operational configuration. This steady configuration, however, can be changed due to the temporary displacement of equipment, electric cable and irregular movement of workers through the fire compartments when the on-line maintenance is processed during the power operation mode or the scheduled outage mode for the refueling. With the consequence of this configuration change, the fire analysis condition and the evaluation result will be different from those that were analyzed based on the steady configuration. In this context, at this paper, the general items for the reassessment are categorized when the configuration has changed. The contemporary zone models for the detail fire analysis are also illustrated for their application for each classified condition.

• 전기의세계
• /
• 제29권5호
• /
• pp.315-320
• /
• 1980

It has been appeared and widely used today SF6 Gas Insulated Substation(Hereafter called GIS) for the power supply to the densely populated area due to the superior insulation withstand ability of SF6 Gas. And to maximize the compact effect of this substation, it is normal practice to connect underground cables. If it is possible to elieminate the redundant lightning arresters using the physical characterestics of travelling waves in underground cables, economical advantages can be obtained together with easy maintenances. It is presented in this paper the possiblity of eliminating the transformer protection lightning arresters under some conditions for the 154kV GIS's (BIL:750kV) which Korea Electric Co. plans to construct using the general purpose digital computer program.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 추계학술대회 논문집
• /
• pp.636-651
• /
• 2000

In these days, SNCF replace the connector wire (M-T type) with a dropper has a equivalent role and function of the one in general lines of TGV, and change the connector wire (T-T-M-M-T-T, T-T-M-M-T type, etc) into a New one has more flexible cable in parallel lines (air section air joint, etc) of TGV. The Connector wire has many problems according to a flow of excessive circulation current (or traction current) and a sudden rise of temperature on catenary when electric locomotive is running in high speed. To solve the question at issue of the connector wire in high speed railway catenary system of Fiance, SNCF return their operating experience in TGV lines to design and execution of catenary system Therefore, we have to deal with the question in design and execution of catenary system for kyoungbu HSR line because we will spend a lot of time and more money for maintenance than for construction of that.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.559-560
• /
• 2006

Fiber optic connector, ferrule, is a device to connect and align fiber optics cable on fiber-optic communication system. In general $ZrO_2$ ceramic ferrule is manufactured by grinding process because the demands precision is very high. For the precision grinding machining, it is very important that structure of co-axial ferrule grinding system is optimized. In this paper, Structural analysis was performed to analyze bed and frame structure of co-axial grinding machine. Deformation and modal analysis for natural frequency was performed using ANSYS design space program to analyze structural characteristics. New improved model of bed and frame structure was proposed based on initial basic model. Therefore, we estimated the structural characteristics precision co-axial grinding machining system.