• Nuclear Engineering and Technology
• /
• 제55권5호
• /
• pp.1911-1923
• /
• 2023

The nuclear safety assessment involving large transient simulations is forcing the community to develop methods for coupling thermal-hydraulics and neutronic codes and three-dimensional (3D) Computational Fluid Dynamics (CFD) codes. In this paper a set of dynamic boundary conditions are implemented in OpenFOAM^Ⓡ in order to apply zero-dimensional (0D) approaches coupling with 3D thermal-hydraulic simulation in a single framework. This boundary conditions are applied to model pipelines, tanks, pumps, and heat exchangers. On a first stage, four tests are perform in order to assess the implementations. The results are compared with experimental data, full 3D CFD, and system code simulations, finding a general good agreement. The semi-implicit implementation nature of these boundary conditions has shown robustness and accuracy for large time steps. Finally, an application case, consisting of a simplified open pool with a cooling external circuit is solved to remark the capability of the tool to simulate thermal hydraulic systems commonly found in nuclear installations.

• 한국해안해양공학회지
• /
• 제13권4호
• /
• pp.290-295
• /
• 2001

해저파이프라인은 부식. 지반 불안정, 앵커 충돌 등으로 인해 파손될 가능성이 있다. 해저파이프라인의 안정성을 위협하는 주된 요소중의 하나는 자유경간이다. 본 논문에서는 자유경간을 형성하고 있는 해저파이프라 인에 대해 축방향 하중을 고려하고 경계조건을 일반화시킨 경우에 대해 동적 자유경간의 허용길이 변화를 해석하였다. 자유경간 양단의 해저지반은 탄성기초로 간주하였으며, 이를 선형 및 회전 스프링으로 치환하여 경계조건을 일반화시켰다. 동적 자유경간의 길이를 산정할 수 있는 무차원화 된 곡선을 얻었다. 이 곡선은 자유경간을 갖는 해저파이프라인의 설계에 유용하게 작용될 수 있음을 보여 주었으며 예제 연구를 통하여 그 적용방법을 소개하였다.

• 대한수학회보
• /
• 제30권2호
• /
• pp.229-238
• /
• 1993

Let M be an n-dimensional compact Riemannian manifold with boundary .part.M. We consider the Neumann eigenvalue problem on M of the equation (Fig.) where .upsilon. is the unit outward normal vector to the boundary .part.M. due to the importance of Poincare inequality for analysis on manifolds, one wishes to obtain the lower bound of the first non-zero eigenvalue .eta.$_{1}$ of (1.1). For the purpose of applications, it is important to relax the dependency of the lower bound on the geometric quantities. For general compact manifolds with convex boundary, Li-Yau [3] obtained the lower bound of .eta.$_{1}$. Recently, Roger Chen [1] investigated the lower bound of the first Neumann eigenvalue .eta.$_{1}$ on compact manifold M with nonconvex boundary. We investigate the lower bound .eta.$_{1}$ with the same conditions as those of Roger chen. But, using the different auxiliary function, we have the following theorem.

• 한국전자파학회지:전자파기술
• /
• 제2권3호
• /
• pp.26-31
• /
• 1991

The scattering property of TMz illuminated a elliptic dielectric cylinders with arbitrary cross section are analyzed by the boundary element techniques. The boundary element equations are for- mulated via Maxwell's equations, weighted residual of Green's theorem, and the boundary conditions. The unknown surface fields on the boundaries are then calculated by the boundary element integral equations. Once the surface fields are found, the scattered fields in far-zone and scattering widths (SW) are readily determined. To show the validity and usefulness of this formulation, computations are compared with those obtained using analytical method and one layer circular cylinder. As exten- sion to arbitrary cross-sectioned cylinders, plane wave scattering from a elliptic dielectric cylinders are numerically analyzed. A general computer program has been developed using the quadratic ele- ments(Higher order borndary elements) and the Gaussian quadrature.

• Journal of applied mathematics & informatics
• /
• 제7권1호
• /
• pp.139-159
• /
• 2000

In this manuscript we study perturbed Newton-like methods for the solution of nonlinear operator equations in a Banach space and their discretized versions in connection with the mesh independence principle. This principle asserts that the behavior of the discretized process is asymptotically the same as that for the original iteration and consequently, the number of steps required by the two processes to converge to within a given tolerance is essentially the same. So far this result has been proved by others using Newton's method for certain classes of boundary value problems and even more generally by considering a Lipschitz uniform discretization. In some of our earlierpapers we extend these results to include Newton-like methods under more general conditions. However, all previous results assume that the iterates can be computed exactly. This is mot true in general. That in why we use perturbed Newton-like methods and even more general conditions. Our results, on the one hand, extend, and on the other hand, make more practical and applicable all previous results.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1349-1353
• /
• 2003

CEMTool is a command style design and analyzing package for scientific and technological algorithm and a matrix based computation language. In this paper, we present a compiler based approach to the implementation of the command mode generalized PDE solver in CEMTool. In contrast to the existing MATLAB PDE Toolbox, our proposed FEM package can deal with the combination of the reserved words such as "laplace" and "convect". Also, we can assign the border lines and the boundary conditions in a very easy way. With the introduction of the lexical analyzer and the parser, our FEM toolbox can handle the general boundary condition and the various PDEs represented by the combination of equations. That is why we need not classify PDE as elliptic, hyperbolic, parabolic equations. Consequently, with our new FEM toolbox, we can overcome some disadvantages of the existing MATLAB PDE Toolbox.

• Journal of Magnetics
• /
• 제18권2호
• /
• pp.95-104
• /
• 2013

This paper presents a general analytical method for predicting the magnetic fields of different Halbach magnet arrays with or without back iron mounted on slotless permanent magnet (PM) linear machines. By using Fourier decomposition, the magnetization components of four typical Halbach magnet arrays are determined. By applying special synthetic boundary conditions on the PM surfaces, the expressions of their magnetic field distributions are derived based on the magnetic scalar potential (MSP), which are simpler than those based on the magnetic vector potential (MVP). The correctness of the method is validated by finite element analysis. The harmonics of airgap flux density waveforms of these Halbach magnet arrays with or without back iron are also compared and optimized.

• Ocean and Polar Research
• /
• 제23권2호
• /
• pp.195-203
• /
• 2001

A fine-grid (3 km ${\times}$ 3 km), three-dimensional nowcast system of sea levels, currents, temperature, and salinity is being developed for the Taiwan Strait. The project takes a balanced approach relying equally on models and observations, will have the capacity of real-time data assimilation, and is aimed at both practical and scientific applications. To determine boundary conditions and verify model results, eight coastal tide-gauge stations were first established along both sides of the strait. Strait-wide hydrographic surveys were conducted by research vessels. Currents are being measured using bottom-mounted ADCP moorings in a meridional deep channel off southwest Taiwan and along a traverse section in the central part of the strait. In addition to a fine-resolution three-dimensional model of the Taiwan Strait, an adjoint model and a larger-domain two-dimensional model were used to better determine boundary conditions in the northern and southern boundaries of the strait. In the first stage of model development, barotropic tides were successfully simulated in a hindcast mode. The protocol product has been released to general public, including government agencies, universities and general users.

• Advances in nano research
• /
• 제16권3호
• /
• pp.265-272
• /
• 2024

In this paper, the problem of static bending of axially functionally graded (AFG) nanobeam is formulated with the local stress(Lσ)- and strain-driven(εD) two-phase local/nonlocal integral models (TPNIMs). The novelty of the present study aims to compare the size-effects of nonlocal integral models on bending deflections of AFG Euler-Bernoulli nano-beams. The integral relation between strain and nonlocal stress components based on two types nonlocal integral models is transformed unitedly and equivalently into differential form with constitutive boundary conditions. Purely LσD- and εD-NIMs would lead to ill-posed mathematical formulation, and Purely εD- and LσD-nonlocal differential models (NDM) may result in inconsistent size-dependent bending responses. The general differential quadrature method is applied to obtain the numerical results for bending deflection and moment of AFG nanobeam subjected to different boundary and loading conditions. The influence of AFG index, nonlocal models, and nonlocal parameters on the bending deflections of AFG Euler-Bernoulli nanobeams is investigated numerically. A consistent softening effects can be obtained for both LσD- and εD-TPNIMs. The results from current work may provide useful guidelines for designing and optimizing AFG Euler-Bernoulli beam based nano instruments.

• Structural Engineering and Mechanics
• /
• 제45권3호
• /
• pp.355-371
• /
• 2013

Single- and multi-span orthotropic functionally graded hollow cylinders subjected to axisymmetrical bending are investigated on the basis of a unified shear deformable shell theory, in which the transverse displacement is expressed by means of a general shape function. To approach the through-thickness inhomogeneity of the hollow cylinder, a laminated model is employed. The shape function therefore shall be determined for each fictitious layer. To improve the computational efficiency, we resort to a transfer matrix method. Based on the principle of minimum potential energy, equilibrium equations are established, which are then solved analytically using the transfer matrix method for arbitrary boundary conditions. Numerical comparisons among a third-order shear deformable shell theory, an exact elastic theory and the present theory are provided for a simply supported hollow cylinder, from which the present theory turns out to be superior in stress estimation. Distributions of displacements and stresses in single- and three-span hollow cylinders with different boundary conditions are also illustrated in numerical examples.