• 한국정밀공학회지
• /
• 제21권2호
• /
• pp.43-51
• /
• 2004

In this paper, the element combination algorithm for designing an arbitrary type of the automatic transmissions is proposed. The powertrain simulation software using this algorithm is then developed. The deliveries of the angular velocities and torques are only considered for the motion characteristics of the automatic transmissions. The effects of the vibration and noise are not considered. The automatic transmission is defined by the basic elements, i.e., planetary gear set, clutch, brake, shaft, general gear, and inertia. The transmission system is defined by the combination of these elements. The element combination matrices automatically generate the equations of motion for each shift. The self error-correcting algorithm is also developed to verify the element combination algorithm. This automotive powertrain simulation/design software with user-friendly graphic user interface has two main modules. The first module, the automatic powerflow generation module, mainly consists of the automatic powerflow and component generation algorithms. This paper covers the theory and application for the first module. The second module deals with the automatic system generation algorithm and will be discussed in the second paper.

• 한국공작기계학회논문집
• /
• 제11권6호
• /
• pp.45-51
• /
• 2002

The existing methods to split overall gear ratio of the cylindrical multi-stage gear train have their own limitations to be used in practical design and are also problematic to be implemented in a formalized algerian. This paper proposes two types of new methods to find gear ratios best approximating the overall gear ratio. The proposed methods are quite general to be applied to the gear train having any number of stages, and offer a considerably good result in a very short time. The first method uses the random search method and the second one is based on the simulated annealing algorithm. The proposed algorithms are expected to be very useful not only as an independent program to split overall gear ratio, but also as a desist sub-module for the integrated desist system of multi-stage gear drives.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2021년도 추계학술대회
• /
• pp.682-685
• /
• 2021

해양수산부가 추진하고 있는 전자 어구 실명제를 위한 어구 자동식별 모니터링 시스템의 선박에 설치되는 IoT 통신 모듈의 서비스 확장성을 제고하기 위하여 3GPP Release13 표준화 기술인 LTE Cat. M1 모듈의 설계와 제작에 대해 기술한다.

• 한국기계가공학회지
• /
• 제15권2호
• /
• pp.22-30
• /
• 2016

It is very important to obtain the net shape of the product to maximize the shear cutting surface of fine blanking. In this paper, the fine blanking die was manufactured to achieve part characteristics, such as flatness and a fully sheared surface. The V-ring in the fine blanking die was designed to prevent lateral movement of the material. The fine blanking experiment was conducted with the fine blanking die. The material usage rate was increased by over 5.7% and that of the water-soluble lubricant was decreased by over 33% when the 2-cavity die technology was applied to fine blanking. The capacity of the existing press could lead to productivity improvement and cost reduction. Thus, 2-cavity die technology for fine blanking with a minute module of an accurate gear for producing seat recliner parts was developed.

• 한국산학기술학회논문지
• /
• 제9권2호
• /
• pp.327-332
• /
• 2008

본 논문에서는 반도체 소자와 디스플레이 패널의 제조공정에 사용되는 플라즈마 식각장비의 RF 정합특성을 개선하기 위한 모듈을 제안하였다. 구동부의 기구 중 베벨기어를 웜기어로 새롭게 설계 제작하고 제어부도 원칩 마이크로 프로세서를 이용하여 재구성하였다. 개발된 모듈은 기존의 정합장치보다 다양한 공정변수에 대한 능동적인 대처가 가능하고, 모터의 흐름현상 등을 개선함으로서 RF 정합특성이 개선되어, 플라즈마 식각공정의 생산성을 향상시킬 수 있음을 보였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.229-230
• /
• 2010

• 한국소음진동공학회논문집
• /
• 제25권7호
• /
• pp.487-495
• /
• 2015

A generalized special program called planetary transmission analysis(here in after PTA) is developed to improve planetary gear noise in automatic transmission. PTA is capable of analyzing any typical one-degree-of-freedom automatic transmission gear train containing any number of simple, compound or complex-compound planetary gear sets. The kinematics module in PTA can compute the rotational speeds of gears and carriers and calculate the order frequencies to predict the planetary noise components. The power flow analysis module performs a complete static force analysis providing forces, moments, or torques of gears, bearings, clutches and connections. Based on the given type and number of planetary gear sets, the search algorithm determines all possible kinematic configurations and gear tooth combinations in a required set of gear ratios, while eliminating whole kinematic redundancies and unfavorable clutching sequences. By using PTA program, planetary internal speeds of new developed automatic transmission are early obtained; therefore, possibility of the noise problem could be predicted in early design stage. As implementing PTA in planetary gear NVH development procedure, planetary gear noise was successfully reduced by 10 dBA.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.687-692
• /
• 2002

This paper reviews the existing methods to divide the gear ratios of a multi-stage gear train, and proposes a simulated annealing-based algorithm to find the best gear ratios. The existing methods have their own limitations to be used in practical design, and are also problematic to be automated in a design system. However, the proposed algorithm is a general one which can be applied to gear trains having any number of stages, and offers a satisfactory result in a very short time. It is expected to be useful as a design sub-module of the design system for multi-stage gear drives.

• 산업공학
• /
• 제14권2호
• /
• pp.134-139
• /
• 2001

This paper describes an automatic design system for the parts that compose the power transmission. Power transmission is composed of shaft, gear, clutch, brake and housing. To design power transmission, there are many recurrent calculations and drawings needed with conventional design process. In this paper, we propose three dimensional automatic design system that reduce recurrent calculations and drawings. Developed system consists of two modules; 1) Design expert system module to assist determining design parameters of clutch, brake and gear. 2) Parametric modeling module to make three dimensional solid model automatically. The proposed system has been tested in the fields and found to be a useful system.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.487-491
• /
• 2001

In this paper, we developed an automated program for the modeling and manufacturing of three-dimensional roller gear cams. A computer program employing the theory of gearing and coordinate transformation is developed for synthesizing and animating cam mechanisms. Then a module for generation NC program for a five-axis CNC machine to manufacture roller gear cam is established.