• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.96-102
• /
• 2006

Because of the increasing need to use clayey soil as the backfill in reinforced soil structures and embankment material, nonwoven geotextiles with the drain capability have been receiving much attention. However, there are few studies of the deformation behavior of nonwoven geotextiles at geosynthetics reinforced soil structures in the field because the nonwoven geotextile, which has low tensile stiffness and higher deformability than geogrids and woven geotextiles, is difficult to measure its deformation by strain gauges and to prevent the water from infiltrating. This study proposes a new, more convenient method to measure the deformation behaviour of nonwoven geotextile by using a strain gauge; and examines the availability of the method by conducting laboratory tests and by applying it on two geosynthetics reinforced soil (GRS) walls in the field. A wide-width tensile test conducted under confining pressure of 7kPa showed that the local deformation of nonwoven geotextile measured with strain gauges has a similar pattern to the total deformation measured with LVDT. In the field GRS walls, nonwoven geotextile showed a larger deformation range than the woven geotextile and geogrid; however, the deformation patterns of these three reinforcement materials were similar. The function of strain gauges attached to nonwoven geotextile in the walls works normally for 16 months. Therefore, the method proposed in this study for measuring nonwoven geotextile deformation by using a strain gauge proved useful.

• 센서학회지
• /
• 제17권3호
• /
• pp.162-167
• /
• 2008

In this paper we report on the electrical properties of carbon fiber which is an attractive material for strain gauges and can also be applied to resonating micro sensors. The carbon fibers used in this research was manufactured from polyactylonitrile (PAN). The fabricated carbon fibers had about $10\;{\mu}m$ in length and several centimeters in length. We employed a micro structure to measure electrical properties of the carbon fiber. The measured electrical resistivity of the carbon fibers were about $3{\times}10^{-3}{\Omega}{\cdot}cm$ A gauge factor of the carbon fiber is also observed with the same system and it was about 400, depending on the structure of the carbon fiber. For the sensor applications of the carbon fiber, it is selectively placed between the gap of Al electrodes using a dielectrophoresis method. When the carbon fiber is resonated by a piezoelectric ceramic, resistance change at a variety of resonance mode was observed through an electrical system.

• 한국환경과학회지
• /
• 제18권3호
• /
• pp.255-261
• /
• 2009

We need water equivalent unit data of snowfall for the purpose of forecast and hydrology related research area. This study developed new method of automatic recording snowfall as weight unit. The instrument designed for measuring weight of snowfall by stain-gauge loadcell. Field test of instrument carried out at Daegwallyeong Obs. Station from 22 Jan. to 22 Feb. 2007. During observation period there is 15.3 cm snow depth and 16.0 mm of accumulated water equivalent depth at Daegwallyeong Obs. Station on 13 to 14 Feb. 2007. But the instrument of this study recorded 22.1 mm of water equivalent depth. It is not easy to explain difference between Daegwallyeong and this study. Because this study is only one case of comparison of snow measurement and there is very little amount of snow observation research. The density of snowfall calculated from 0.09 to $0.15g/cm^3$ from the observation data of 13 to 14 Feb. 2007. There is high relation between radar echo and snowfall amount measured by weight unit. It can supports forecast of snowfall and development of numerical model for forecast.

• 전자공학회논문지T
• /
• 제35T권1호
• /
• pp.75-81
• /
• 1998

본 논문은 장방형 다이아프램 형상과 단일형 피에조저항 전단응력 스트레인 게이지 와의 관계를 해석하여 최적의 전단응력 압력센서를 설계하기 위한 것이다. 다이아프램상의 전단응력을 시뮬레이션 하기 위하여 유한요소법 분석 프로그램 ANSYS 5.1를 사용하였다. 시뮬레이션 결과는 다이아프램 형상비가 3일때 스트레인 게이지의 위치는 중앙에서, 크기는 전체 장방형 다이아프램 크기의 8%를 점유할때 온도에 안정적이고, 최대 감도를 가진다는 것을 조사하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 A
• /
• pp.442-444
• /
• 1993

The design problem of the AGC (Automatic Gauge Control) without a gauge-meter and a load-cell for a reversing rolling mill will be considered in this paper. The proposed controller in this paper is designed using only the linearly approximated relationships between a roll gab, a metal thickness and a pressing force. The data transfer delaying can be released by using these relationships. To show the validity of the proposed control method, the results of the computer simulation and the mathematical analysis will be presented in this paper.

• 한국경영공학회지
• /
• 제23권4호
• /
• pp.165-177
• /
• 2018

Smart technology has been utilized in various fields of all kinds of industries. Manufacturing industry has built its smart technology environment appropriate for its manufacturing fields in order to strengthen its manufacturing performance and competitiveness. The advance of smart technology for manufacturing industry needs to efficiently produce products, and response customer's demands and services in a global industrial environment. The smart technology capability of manufacturing fields is very crucial for the innovative production and efficient operation activities, and for efficient advancement of the manufacturing performance. We have necessitated a scientific and objective method that can gauge a smart technology ability in order to manage and strengthen the smart technology ability of manufacturing fields. This research provides a comprehensive framework that can rationally gauge the smart technology capability of manufacturing fields for effectively managing and advancing their smart technology capabilities. In this research, we especially develop a structural framework that can gauge the smart technology capability for a smart factory of manufacturing fields, with verifying by reliability analysis and factor analysis based on previous literature. This study presents a 13-item framework that can measure the smart technology capability for a smart factory of manufacturing fields in a smart technology perspective.

• 한국진공학회지
• /
• 제14권2호
• /
• pp.59-68
• /
• 2005

부피가 다른 세 개의 진공용기를 조합하여 정적법 (static expansion method)을 이용한 중진공영역의 국가표준기를 개발하였다. 이 장치를 이용하여 133pa 범위의 용량형 진공게이지 (capacitance diaphragm gauge)를 교정하여 국제표준화기구의 측정불확도 표현지침에 따라 분석하였다. 그 결과 표준압력 0.553Pa에서의 확장불확도 (expanded uncertainty)가 95% 신뢰수준 (confidence level), 포함인자 (coverage factor) k=2에서 $2.628\times10^{-3}Pa$로 우수한 성능을 보였다.

• 한국컴퓨터정보학회논문지
• /
• 제23권2호
• /
• pp.27-34
• /
• 2018

In this paper, we propose a new method to read the hand of analog gauges to prepare for the smart factory. In addition, we suggest a new and improved method that can apply, in general, diverse analog gauges even if their scale types and ranges are various. Many companies are making great efforts to build smart factories that increase energy efficiency and automation. Managers use a variety of equipment and tools to manage the production process at the factory. In this kind of factory, analog gauges have been often used with many equipment and tools. Analog gauges are mostly circular in shape, and most papers use circular hough transform to find the center and radius of a circle. However, when the object to be found is not of the correct circle type, it takes a long time to recognize the circle using the circular hough transform, and the center and radius of the circle can not be calculated accurately. The proposed method was tested on various circular analog gauges. As a result, we confirmed that our method is outstanding.

• 한국산학기술학회논문지
• /
• 제14권1호
• /
• pp.470-477
• /
• 2013

본 논문은 목자판과 수면이 포함된 시차가 있는 연속적인 두 영상을 이용하여 수면위치를 탐색하는 방법과 그 적용성을 평가한 결과를 기술한다. 수위표 상단으로부터 특정 크기의 직사각형 검사영역을 설정하고 짧은 시차를 가진 두 영상의 동일한 위치의 검사영역에 대해 상관계수를 산정한다. 이렇게 함으로써 물의 흐름으로 픽셀 농도가 변화하는 수역과 픽셀 농도가 고정되어 있는 육역을 구분한다. 제안한 기법을 검증하기 위해 실험실에서 촬영한 사진을 분석하였다. 분석결과 검사영역의 크기에 따라 상관계수 특성이 달라짐을 확인하였으며, 검사영역이 수위표 전체 폭에 걸쳐 있는 경우에 상관계수에 따른 수면특성이 뚜렷이 나타나 제안된 기법이 수면을 찾는데 활용될 수 있음을 확인하였다. 또한 시차가 있는 두 영상의 상관분석을 통한 수위측정방법을 통해 기존 영상수위계의 오염된 영상에서 오차범위가 10~42cm 발생했던 것을 2.6cm 이내로 줄일 수 있었다. 이 방법은 기존 영상수위계의 방법을 보완하여 수위 측정 성능을 높이는데 활용될 수 있을 것이다.

• 한국위성정보통신학회논문지
• /
• 제12권4호
• /
• pp.62-66
• /
• 2017

본 논문에서는 전파강수계의 운영제어 및 자료처리를 위한 통신 및 자료처리 전략을 개발하였다. 전파강수계는 24GHz 대역의 이중편파 관측을 통하여 반경 1km 이내의 강수장을 산출하고 최종적으로 관측지역내의 면적강수를 산출하고자 하는 소형 시스템이다. 소형 시스템의 특성상 시스템 내의 제한된 자원을 활용하되 정확한 강수측정을 위한 방안이 고려되어야 하고 무인운영 및 원격 관리를 목적으로 하기 때문에 네트워크의 사용도 최소화해야 할 필요가 발생한다. 이러한 제한 사항의 극복을 위하여 자료의 품질관리 측면에서는 비기상 에코의 제거를 위해서 퍼지 논리(Fuzzy logic)을 이용한 품질관리 기법을 적용하였고, 강수강도 산출을 위해서 다양한 강수강도 추정식을 활용한 강수장 가중합성 전략을 개발하였다. 또한 가변 통신데이터를 이용하여 전파강수계와 원격지 관리 컴퓨터간의 통신량을 최소화하는 전략을 개발하였다. 이러한 소프트웨어 자료처리 전략개발을 통해 원격지에 설치되어 운영될 전파강수계를 안정적으로 운영할 수 있는 통신 및 자료처리 시스템을 개발할 수 있을 것으로 기대한다.