• IEIE Transactions on Smart Processing and Computing
• /
• v.3 no.5
• /
• pp.313-318
• /
• 2014

Recently, Ethernet-based Diagnostic Over Internet Protocol (DoIP) was applied to automotive systems, and in-vehicle gateways have been introduced to integrate Ethernet with traditional in-vehicle networks, such as the local interconnect network (LIN), controller area network (CAN) and FlexRay. The introduction of in-vehicle gateways and of Ethernet based diagnostic protocols not only decreases the complexity of the networks, but also reduces the update time for ECU software reprogramming while enabling the use of a range of services, including remote diagnostics. In this paper, a diagnostic gateway was implement for an automotive system, and the performance measurements are presented. In addition, a range of applications provided by the diagnostic gateway are proposed.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.6
• /
• pp.524-531
• /
• 2010

The automobile networks consist of the communication bus systems which become independent and heterogeneous each other. Most often, the CAN buses are implemented in a car in order to connect all the electronic control units in various ways. Thus, some gateways are necessary for exchanging the useful information between electronic control units on the buses. The automobile body networks group is divided into two kinds on a large scale, namely the low-speed bus and the high-speed bus. To interchange messages between the two, a CAN signal gateway is designed and implemented in a miniature scale. A network analyzer (called "Vehicle spy") and an oscilloscope monitor network situation to confirm the due operation of CAN signal gateway. The efficiency of the designed gateway is evaluated. The more message thread increased, the more efficiency decreased.

• Journal of information and communication convergence engineering
• /
• v.16 no.1
• /
• pp.31-37
• /
• 2018

In this work, we propose an analytic framework for evaluating the quality of service and dimensioning the link capacity in the gateway router of a smart farm with a greenhouse eco-management system. Specifically, we focus on the gateway router of an IoT network that provides an access service for smart farms. We design the link capacity of a gateway router that is used for the remote management of the greenhouse eco-management system to accommodate both time-critical and delay-tolerant traffic in a greenhouse LAN. For this purpose, we first investigate the ecosystem for smart farm, and we define the specification and requirements of the greenhouse eco-management system. Second, we propose a system model for the link capacity of a gateway that is required to guarantee the delay performance of time-critical applications in the greenhouse LAN. Finally, the validity of the proposed system is demonstrated through a series of numerical experiments.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.967-969
• /
• 2003

Because of the rapid growth of Internet, the firewall is generally used to protect the network sorority. The firewall on Linux or FreeBSD Kernal, which is widely used, supports either Gateway or Bridge Mode. In this study, we present the firewall which supports simultaneously Gateway and Bridge Mode. For the application service, it is suggested that the firewall which has excellent expandability ran construct a network without another proxy.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.8
• /
• pp.3079-3089
• /
• 2015

In this paper, a smart constrained application protocol (CoAP)-based gateway with a border router is proposed for home safety services to remotely monitor the trespass, fire, and indoor air quality. The smart CoAP gateway controls a home safety sensor node with a pyroelectric infrared motion sensor, a fire sensor, a humidity and temperature sensor, and a non-dispersive infrared CO2 sensor and gathers sensing data from them. In addition, it can convert physical sensing data into understandable information and perform packet conversion as a border router for seamless connection between a low-power wireless personal area network (6LoWPAN) and the Internet (IPv6). Implementation and laboratory test results verify the feasibility of the smart CoAP gateway which especially can provide about 97.20% data throughput.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.7
• /
• pp.1324-1330
• /
• 2011

This paper presents the development of gateway for smart grid for the interoperable communication between IEC 61850 station leveled devices and one of legacy Modbus, DNP3, and IEC60870-5-101/104/103 communication protocol devices of bay level in substation or for the exchange of information between IEC 61850 substation and SCADA control center. The data-mapping model is designed for the exchange of information and the gateway configuration tool is developed for generating meta-data based on XML Schema. this paper is mostly concerned with the design and realization of gateway system for the interoperable data communication between a legacy protocol device and IEC61850 based devices or systems.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.9 no.1
• /
• pp.1-6
• /
• 2010

Multi-functional USN Gateway (MUG) is a multipurpose system combining a mesh router and a sensor gateway. The paper presents the design and implementation of the MUG system and the test-bed to verify the MUG system. MUG combines IEEE 802.11n based Wi-Fi mesh router functions and USN gateway functions. MUG supports IP sensor networks based on 6LoWPAN and non IP sensor networks based on ZigBee. MUG also provides various backhaul network interfaces including WiBro, HSDPA, and Ethernet Interfaces. We verify the feasibility of the MUG system through implementation and evaluate the performance by installing and testing several MUG systems in the test-bed.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.04a
• /
• pp.151-153
• /
• 2001

Residential Gateway는 홈 네트워크를 구성할 경우 홈에서의 각종 통신망에 연결되어 있는 정보가전 기기를 제어하고, 기기들간 정보를 공유할 수 있게 하고, 댁내 정보가전기기가 외부 인터넷과 통신할 수 있는 Gateway의 역할을 수행한다. 또한 사용자가 정보 가전기기들을 손쉽게 사용하고 제어할 수 있는 서비스를 제공한다. 이러한 기능을 사용자에게 제공하고 다양한 응용들을 운용하기 위해 Residential Gateway는 댁내 하위 네트워크에 사용되는 다양한 통신규약을 위한 인터페이스를 제공해야 되고, 사용자에게 다양한 응용을 제공하기 위해 높은 성능을 가져야 함으로써 이에 따른 제약 즉, 전력소모, 열 발생, 소음 등의 문제점이 야기된다. 따라서 본 논문에서는 RG 하드웨어 설계 및 개발에 있어서 고려해야 할 사항에 대해 분석하였다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.04d
• /
• pp.503-505
• /
• 2003

패킷망을 통해 음성, 영상, 데이터를 동시에 제공할 수 있는 차세대 네트워크(NGN) 개념이 제안되어 현재 네트워크 상에 전개되어 가고 있다. 하지만 NGN의 Softswitch의 구성을 위해서는 현재의 PSTN 내의 Class 4/5 switch를 NGN의 구성에 맞게 끔 Access Gateway 및 Media Gateway로 교체해 나가야 하며 교체 후에도 소비자의 새로운 서비스 신설 요구에 신속하게 부합하기 위하여 기존 시스템의 서비스 중단없이 새로운 서비스 및 신규 프로토콜을 신속히 전개할 수 있는 개념은 필수적인 요소가 되었다. 이러한 점을 지원하기 위하여 본 논문에서는 개방형 네트워크 아키텍처 접근 방식인 Active Network의 개념을 응용한 차세대네트워크 Media Gateway Controller내의 이산 메커니즘 적용 Active Packet Processor도입하였다.

• International Journal of Knowledge Content Development & Technology
• /
• v.11 no.1
• /
• pp.7-27
• /
• 2021

High unemployment rates repeatedly cause recurring social problems such as fewer employment opportunities and employment insecurity. Following this trend, various programs related to employment have been provided through various government and institutions. However, they have established overlapping policies and programs and there is no one stop gateway to find effective and efficient way to find relevant information. For this purpose, this study aims to provide employment and job search subject gateway development. The study has carried out case studies, literature reviews, and user survey. Based on this study, it suggested a linked metadata model to organize and link scattered information together, and a digital gateway operating diverse information services. It is expected to provide a basis to develop comprehensive information service model for employment.