• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.93-97
• /
• 2005

This paper proposes a design of stepper motor control in microstep driven mode using FPGA (Field Programmable Gate Array) for hardware implementation. The methods to drive stepper motor in microstep excitation mode are to control of the controlling currents in each phase windings of stepper motor with reference signals. These reference signals are used for controlling the current levels, the required variation of current levels with rotor position can be obtained from the ideal linear or sinusoidal approximations to the static torque-displacement ($T-{\theta}$) characteristic curve. In addition, the hardware implementation of stepper motor controller can be designed uses VHDL (Very high speed integrated circuits Hardware Description Language) and synthesis using an Altera FPGA, FLEX10K family, EPF10K20RC240-4 device as target technology and use MAX+PlusII program for overall development. A multi-stack variable-reluctance stepper motor of Sanyo Denki is used in the experiments.

• 한국기계가공학회지
• /
• 제10권5호
• /
• pp.85-90
• /
• 2011

In this paper a design procedure via computer-aided molding simulation is presented to optimize the air-trap locations in a speaker encloser of mobile phone. The molding flow simulation reveals that the race-tracking phenomenon is the dominant feature in the current mold design. In obtaining an optimal filling pattern, the local modifications of the wall thickness such as in a flow leader attachment are considered as the primary control factor, and both the gate position and the filling time become the secondary control factor. In the one-at-a-time approach, the last location to be filled in the mold cavity could be successfully moved to the extremities of the part, allowing a natural ventilation of entrapped air through the mold parting plane.

• 대한전자공학회논문지
• /
• 제18권6호
• /
• pp.9-15
• /
• 1981

다출력 TANT회로망에 대한 구성게이트수와 이들의 상호연결에 관계되는 게이트입력수를 최소화시키는 새로운 방법이 제시되었다. 본 연구에서는 다출력맵(multiple-output map)을 구성하여 헤드변수의 갯수가 작은 순서에 따라 통합 개념을 적용하여 최적함수를 구성하였다. 조직적인 통합은 PSA(position search algorithm)에 의했으며 이로써 전체적인 설계자정을 줄일 수 있었다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.423-426
• /
• 2005

The injection molding process has applied to a variety of fields by a development of various plastic resins. Recently, this process has been extending to a field of parts of shoes. In this study, the injection mold of shank which is a one of the parts of shoes has been designed. The position of gate and the injection procedure have been optimized by a simulation using the CAE software and an analysis using the DOE. As a result, the improved injection mold of shank has been manufactured in a short time. Appling the CAE and the DOE at the process of the injection mold design eventually lead an increase in the productivity and the quality of parts.

• 대한원격탐사학회지
• /
• 제18권5호
• /
• pp.273-280
• /
• 2002

This paper describes a mathematical model and its utilization algorithm for calculating the accurate target position on the ellipsoidal earth surface which corresponds to a range-azimuth coordinates of unprocessed synthetic aperture radar (SAR) images. A geometrical model which is a set of coordinate transformations is described. The side-looking directional angle (off-nadir angle) is determined in an iterative fashion by using the model and the accurate slant range which is calculated from the range sampling timing of the instrument. The algorithm can be applied not only for the geolocation of SAR images but also for the high quality SAR image generation by calculating accurate Doppler parameters.

• 대한임베디드공학회논문지
• /
• 제6권2호
• /
• pp.93-99
• /
• 2011

In this paper, an ATSC(Advanced Television Standard Committee)-M/H(Mobile/Handheld) multiplexer is designed and implemented using an embedded Linux based hardware platform. The ATSC-M/H multiplexer is composed of a CPU(Central Processor Unit), an FPGA(Field-Programmable Gate Array), ASI(Asynchronous Serial Interface)/SMPTE310(Society of Motion Picture and Television Engineers310) interface board, and a GPS(Global Position System) clock processing block. The main functions of the ATSC-M/H multiplexer executed in the CPU and FPGA are described. The operation of the ATSC-M/H multiplexer is verified by processing its broadcast signal on a commercial receiver analyzer.

• Design & Manufacturing
• /
• 제15권2호
• /
• pp.36-41
• /
• 2021

The 3 dimensional Pipe (Annular) Shaped Products was selected as a test sample, then a attribute of a molding shrinkage according to the parameters of a injection process was examined with PC, which is the typical engineering plastic. Both the inside and the outside diameter of the Pipe (Annular) sample were shrank into the inner direction of the part. And then the comparative analysis of the samples proved that a increasing thickness led a bigger shrinkage rate in the equal outside diametric samples, and a decreasing outside diameter caused a bigger shrinkage rate in the same thickness samples. The comparative study of the cushion volume of a injection machine showed that the molding shrinkage was most affected by the pressure strength among the resin temperature, the maintenance pressure strength and the maintenance pressure duration time. Each of the shrinkage rates according to the measuring direction and the gate position was different. As a result, the injection molded sample had not a typical circular shape.

• 건축역사연구
• /
• 제16권6호
• /
• pp.47-66
• /
• 2007

$Lokap{\bar{a}}las$ are understood as the deities of four directions in Buddhism: $Dhrtar{\bar{a}}stra$ in the East, $Vir{\bar{u}}dhaka$ in the South, $Vir{\bar{u}}p{\bar{a}}ksa$ in the West and $Vai{\acute{s}}ravana$ in the North respectively. Their common name is, therefore, called as the "Four Guardian Kings", whose function is to prevent demonic forces from entering into its sacred world. Although the position of $Lokap{\bar{a}}las$ is to the lowest level in the hierarchy of the minor deities in Buddhism, the cult of $Lokap{\bar{a}}las$ was widely spread and prominent in the countries of Northern Buddhism. It played a significant role in terms of the state-protecting Buddhism, on behalf of it's esoteric and magic power. More than 20 Gateways of the $Lokap{\bar{a}}las$ and $Lokap{\bar{a}}la$ statues were still well preserved in Korea, and they were believed to be constructed after the Japanese attack in 1592. After war, monks had concentrated on restoring ruined temples and building many new Gateways of the Four Guardian Kings over the Korean peninsular. Under such circumstances, even though the $Lokap{\bar{a}}las$ played a significant role as the subject of cult in Korean Buddhism. they might have a small chance to be taught traditional Lama iconography exactly. The purpose of this essay is to examine the relation of orientation of the Gate way of $Lokap{\bar{a}}las$ and allocation of each Kings inside the gate.

• 한국산학기술학회논문지
• /
• 제9권6호
• /
• pp.1726-1732
• /
• 2008

사출성형은 다양한 형태의 제품을 대량 생산할 수 있는 플라스틱 성형 공법중의 하나이다. 플라스틱 제품을 만들기 위해서는 고상의 재료를 액상으로 녹인 후 다시 고상으로 굳히는 과정을 거치는 데, 이 과정 중에 많은 문제점들이 발생을 하게 된다. 과거에는 이러한 문제를 해결하기 위해서 성형 후 금형 설계 변경 등의 시행착오적 방법을 사용하였으나, 성형과정에 대한 사출성형 CAE(Computer Aided Engineering)를 적용함으로써, 사전에 문제점을 파악하는 기술이 도입되었다. 플라스틱 제품의 큰 문제점 중 하나가 치수안정성이다. 특히 박막사출성형품은 게이트의 위치, 냉각채널과 온도에 따라서 변형량이 크게 달라진다. 본 연구에서는 현재 Stackmold방식으로 4개의 Cavity에 4개의 Hot-Runner가 설치된 금형을 통해 생산중인 DVD Tray 박막사출제품의 생산 원가 절감을 위해서 Cavity하나에 한 개의 Hot-Runner를 설계하기 위해서 CAE 해석을 통해 게이트의 위치, 냉각채널과 온도에 따라 비교하여 해석해 최적의 제품 설계를 하였다. CAE 해석에는 상업화된 CAE 프로그램인 Moldflow를 사용하였고, 수지는 PC+ABS를 사용하였다.

• 보존과학회지
• /
• 제37권5호
• /
• pp.491-504
• /
• 2021

경복궁 광화문은 일제 강점기를 거치면서 해체 이전되었다가 한국전쟁 과정에서 소실되었다. 1968년에 철근 콘크리트로 중건되었다가 정확한 복원을 위해 다시 해체되어 2010년 현재의 위치에 세워졌다. 광화문 앞에 놓여져 있던 한 쌍의 해치상도 해체되어 방치되어 있다가 원위치에서 수차례 이탈해 본래의 위치를 찾지 못하고 현재에 이르고 있다. 서울특별시와 문화재청이 '광화문광장 재구조화 사업'의 일환으로 월대와 해치상을 복원하기로 함에 따라 사업의 효율성 제고를 위해 본 연구에서는 1900년대 초반의 기록사진과 새롭게 찍은 디지털 카메라 사진에 대한 이미지분석을 통하여 해치상의 원위치를 추정하는 방법과 결과를 제안한다. 기록사진의 촬영 위치를 찾아 재촬영하고 찾고자 하는 피사체와의 각도와 거리를 계산하여 일제 강점기 이전의 해치상의 원위치를 추정하는 데 성공하였다. 본 연구를 통하여 확인된 왼쪽 해치상의 위치는 현재의 왼쪽 해치상 표시석의 중앙을 기준으로 동쪽으로 약 9.6 m, 북쪽으로 약 7.4 m 지점에 있으며, 오른쪽 해치상은 현재의 오른쪽 해치상 표시석의 중앙을 기준으로 서쪽으로 약 1.9 m, 북쪽으로 약 8.0 m 지점에 있는 것으로 추정할 수 있었다. 이와 같은 기록사진을 이용한 건축물의 위치복원을 시도한 사례가 국내외에서는 처음이나 문화재복원에 대한 새로운 과학적인 방법론으로서 본 연구의 의미가 있다.