• 한국정보통신학회논문지
• /
• 제11권9호
• /
• pp.1717-1723
• /
• 2007

본 연구에서는 PLZT(10/30/70), PLT(10), PZT(30/70) 강유전체 박막을 이용한 quasi-MFISFET (Metal-Ferroelectric-Insulator-Semiconductor FET) 소자를 제작하여 드레인 전류 특성을 조사하였다. 이로부터, quasi-MHSFET 소자의 드레인 전류 크기가 강유전체 박막의 분극 크기에 따라 직접적인 영향을 받으며 결정된다는 사실을 알 수 있었다. 또, ${\pm}5V$ 와 ${\pm}10V$의 게이트 전압변화를 주었을 때 메모리 윈도우는 각각 0.5V 와 1.3V 이었고, 강유전체 박막에 인가되는 전압에 의해 만들어지는 항전압의 변동에 따라 메모리 윈도우가 변화된다는 사실을 확인할 수 있었다. MFISFET 소자의 retention 특성을 알아보기 위 해 PLZT(10/30/70) 박막의 전기장과 시간지연에 따른 누설전류 특성을 측정하여 전류밀도 상수 $J_{ETO}$, 전기장 의존 요소 K, 시간 의존 요소 m을 구하고, 이들 파라미터를 이용하여 시간에 따른 전하밀도의 변화를 정량적으로 분석하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.268-268
• /
• 2016

Chemical sensors have attracted much attention due to their various applications such as agriculture product, cosmetic and pharmaceutical components and clinical control. A conventional chemical and biological sensor is consists of fluorescent dye, optical light sources, and photodetector to quantify the extent of concentration. Such complicated system leads to rising cost and slow response time. Until now, the most contemporary thin film transistors (TFTs) are used in the field of flat panel display technology for switching device. Some papers have reported that an interesting alternative to flat panel display technology is chemical sensor technology. Recent advances in chemical detection study for using TFTs, benefits from overwhelming progress made in organic thin film transistors (OTFTs) electronic, have been studied alternative to current optical detection system. However numerous problems still remain especially the long-term stability and lack of reliability. On the other hand, the utilization of metal oxide transistor technology in chemical sensors is substantially promising owing to many advantages such as outstanding electrical performance, flexible device, and transparency. The top-gate structure transistor indicated long-term atmosphere stability and reliability because insulator layer is deposited on the top of semiconductor layer, as an effective mechanical and chemical protection. We report on the fabrication of InGaZnO TFTs with silver nanowire as the top gate electrode for the aim of chemical materials detection by monitoring change of electrical properties. We demonstrated that the improved sensitivity characteristics are related to the employment of a unique combination of nano materials. The silver nanowire top-gate InGaZnO TFTs used in this study features the following advantages: i) high sensitivity, ii) long-term stability in atmosphere and buffer solution iii) no necessary additional electrode and iv) simple fabrication process by spray.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.128.1-128.1
• /
• 2016

Nitrided-metal gates on the high-${\kappa}$ dielectric material are widely studied because of their use for sub-20nm semiconductor devices and the academic interest for the evanescent states at the Si/insulator interface. Issues in these systems with the Si substrate are the electron mobility degradation and the reliability problems caused from N defects that permeates between the Si and the $SiO_2$ buffer layer interface from the nitrided-gate during the gate deposition process. Previous studies proposed the N defect structures with the gap states at the Si band gap region. However, recent experimental data shows the possibility of the most stable structure without any N defect state between the bulk Si valence band maximum (VBM) and conduction band minimum (CBM). In this talk, we present a new type of the N defect structure and the electronic structure of the proposed structure by using the first-principles calculation. We find that the pair structure of N atoms at the $Si/SiO_2$ interface has the lowest energy among the structures considered. In the electronic structure, the N pair changes the eigenvalue of the silicon-induced gap state (SIGS) that is spatially localized at the interface and energetically located just above the bulk VBM. With increase of the number of N defects, the SIGS gradually disappears in the bulk Si gap region, as a result, the system gap is increased by the N defect. We find that the SIGS shift with the N defect mainly originates from the change of the kinetic energy part of the eigenstate by the reduction of the SIGS modulation for the incorporated N defect.

• 한국정보전자통신기술학회논문지
• /
• 제2권1호
• /
• pp.3-9
• /
• 2009

AMOLED 디스플레이는 LCD에 비해 넓은 시야각, 빠른 응답 속도, 박막화의 용이성 등의 많은 장점들을 갖고 있으나 불균일한 TFT의 전기적 특성과 전원선의 전압 강하에 의한 휘도 불균일, 잔상 현상 및 수명 등과 같은 많은 문제점들이 있다. 이 중에서 본 논문에서는 구동 TFT 소자의 hysteresis 현상에 의해 발생하는 가역적 잔상 현상을 개선하고자 한다. TFT의 hysteresis 특성을 개선하기 위해 게이트 산화막 증착 전에 표면 처리 조건을 변경하였다. 게이트 산화막 증착 전에 실시한 자외선 및 수소 플라즈마 표면 처리는 게이트 산화막과 다결정 실리콘 박막 사이의 계면 trap 밀도를 $3.11{\times}10^{11}cm^{-2}$로 감소시켰고, hysteresis 레벨을 0.23 V로 줄였으며 출력 전류 변화율을 3.65 %로 감소시켰다. 자외선 및 수소 플라즈마 처리를 행함으로써 AMOLED 디스플레이의 가역적 잔상을 많이 개선할 수 있을 것으로 기대된다.

• 한국산학기술학회논문지
• /
• 제11권10호
• /
• pp.3917-3922
• /
• 2010

본 논문은 U-band(40~60 GHz)대역에 최적화된 epitaxial로 pHEMT(Pseudomorphic High Electron Mobility Transistor)을 제작, 대신호 모델링하여 특성분석 및 60 GHz 대역의 3단 증폭기를 MMIC(Monolithic Microwave Integrated Circuit)로 설계 제작하였다. 본 논문에 사용된 pHEMT는 $0.12\;{\mu}m$의 게이트 길이와 총 게이트 면적 $100\;{\mu}m$, $200\;{\mu}m$를 사용하여 대신호 모델링하였으며 설계시 안정도의 향상을 위하여 부궤환회로와 함께 MIM(Metal-Insulator-Metal) 커패시터 대신 MCLF(Microstriop Coupled Line Filter)를 사용하여 안정도를 향상시켰다. 제작결과 크기가 $2.5{\times}1.5mm^2$이고 소모된 전류는 약 40 mA, 동작주파수 59.5 ~ 60.5 GHz에서 이득 19.9 dB ~ 18.6 dB, 입력정합특성 -14.6 dB ~-14.7 dB, 출력정합 특성 -11.9 dB ~-16.3 dB와 출력 -5 dBm의 특성을 얻었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.35-38
• /
• 2002

In this paper, the characteristics of channel hot electron (CHE) injection for the write operation in a NOR-type SONOS flash memory with common source line were investigated. The thicknesses of he tunnel oxide, the memory nitride， and the blocking oxide layers for the gate insulator of the fabricated SONOS devices were $34{\AA}$, $73{\AA}$, and $34{\AA}$, respectively. The SONOS devices compared to floating gate devices have many advantages, which are a simpler cell structure, compatibility with conventional logic CMOS process and a superior scalability. For these reasons, the introduction of SONOS device has stimulated. In the conventional SONOS devices, Modified Folwer-Nordheim (MFN) tunneling and CHE injection for writing require high voltages, which are typically in the range of 9 V to 15 V. However CHE injection in our devices was achieved with the single power supply of 5 V. To demonstrate CHE injection, substrate current (Isub) and one-shot programming curve were investigated. The memory window of about 3.2 V and the write speed of $100{\mu}s$ were obtained. Also, the disturbance and drain turn-on leakage during CHE injection were not affected in the SONOS array. These results show that CHE injection can be achieved with a low voltage and single power supply, and applied for the high speed program of the SONOS memory devices.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권1호
• /
• pp.8-22
• /
• 2014

In the past few decades, CMOS logic technologies and devices have been successfully developed with the steady miniaturization of the feature size. At the sub-30-nm CMOS technology nodes, one of the main hurdles for continuously and successfully scaling down CMOS devices is the parametric failure caused by random variations such as line edge roughness (LER), random dopant fluctuation (RDF), and work-function variation (WFV). The characteristics of each random variation source and its effect on advanced device structures such as multigate and ultra-thin-body devices (vs. conventional planar bulk MOSFET) are discussed in detail. Further, suggested are suppression methods for the LER-, RDF-, and WFV-induced threshold voltage (VTH) variations in advanced CMOS logic technologies including the double-patterning and double-etching (2P2E) technique and in advanced device structures including the fully depleted silicon-on-insulator (FD-SOI) MOSFET and FinFET/tri-gate MOSFET at the sub-30-nm nodes. The segmented-channel MOSFET (SegFET) and junctionless transistor (JLT) that can suppress the random variations and the SegFET-/JLT-based static random access memory (SRAM) cell that enhance the read and write margins at a time, though generally with a trade-off between the read and the write margins, are introduced.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권1호
• /
• pp.30-37
• /
• 1996

Previously, crystallization of a-Si:H films on glass substrates were limited to anneal temperature below 600.deg. C, over 10 hours to avoid glass shrinkage. Our study indicates that the crystallization is strongly influenced by anneal temperature and weakly affected by anneal duration time. Because of the high temperature process and nonconducting substrate requirements for poly-Si TFTs, the employed substrates were limited to quartz, sapphire, and oxidized Si wafer. We report on poly-Si TFT's using high temperature anneal on a Si:H/Mo structures. The metal Mo substrate was stable enough to allow 1000.deg. C anneal. A novel TFT fabrication was achieved by using part of the Mo substrate as drain and source ohmic contact electrode. The as-grown a-Si:H TFT was compared to anneal treated poly-Si TFT'S. Defect induced trap states of TFT's were examined using the thermally stimulated current (TSC) method. In some case, the poly-Si grain boundaries were passivated by hydrogen. A-SI:H and poly-Si TFT characteristics were investigated using an inverted staggered type TFT. The poly -Si films were achieved by various anneal techniques; isothermal, RTA, and excimer laser anneal. The TFT on as grown a-Si:H exhibited a low field effect mobility, transconductance, and high gate threshold voltage. Some films were annealed at temperatures from 200 to >$1000^{\circ}C$ The TFT on poly-Si showed an improved $I_on$$I_off$ ratio of $10_6$, reduced gate threshold voltage, and increased field effect mobility by three orders. Inverter operation was examined to verify logic circuit application using the poly Si TFTs.

• 한국전기전자재료학회논문지
• /
• 제22권10호
• /
• pp.821-825
• /
• 2009

Recently, transparent ZnO-based TFTs have attracted much attention for flexible displays because they can be fabricated on plastic substrates at low temperature. We report the fabrication and characteristics of ZnO TFTs having different channel thicknesses deposited at low temperature. The ZnO films were deposited as active channel layer on $Si_3N_4/Ti/SiO_2/p-Si$ substrates by RF magnetron sputtering at $100^{\circ}C$ without additional annealing. Also, the ZnO thin films deposited at oxygen partial pressures of 40%. ZnO TFTs using a bottom-gate configuration were investigated. The $Si_3N_4$ film was deposited as gate insulator by PE-CVD at $150^{\circ}C$. All Processes were processed below $150^{\circ}C$ which is optimal temperature for flexible display and were used dry etching method. The fabricated devices have different threshold slop, field effect mobility and subthreshold slop according to channel thickness. This characteristics are related with ZnO crystal properties analyzed with XRD and SPM. Electrical characteristics of 60 nm ZnO TFT (W/L = $20\;{\mu}m/20\;{\mu}m$) exhibited a field-effect mobility of $0.26\;cm^2/Vs$, a threshold voltage of 8.3 V, a subthreshold slop of 2.2 V/decade, and a $I_{ON/OFF}$ ratio of $7.5\times10^2$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.533-533
• /
• 2007

The stress effect of SiGe p-type metal oxide semiconductors field effect transistors(MOSFETs) has been investigated to compare device properties using Si bulk and partially depleted silicon on insulator(PD SOI). The electrical properties in SiGe PD SOI presented enhancements in subthreshold slope and drain induced barrier lowering in comparison to SiGe bulk. The reliability of gate oxides on bulk Si and PD SOI has been evaluated using constant voltage stressing to investigate their breakdown (~ 8.5 V) characteristics. Gate leakage was monitored as a function of voltage stressing time to understand the breakdown phenomena for both structures. Stress induced leakage currents are obtained from I-V measurements at specified stress intervals. The 1/f noise was observed to follow the typical $1/f^{\gamma}$ (${\gamma}\;=\;1$) in SiGe bulk devices, but the abnormal behavior ${\gamma}\;=\;2$ in SiGe PD SOI. The difference of noise frequency exponent is mainly attributed to traps at silicon oxide interfaces. We will discuss stress induced instability in conjunction with the 1/f noise characteristics in detail.