• 자원환경지질
• /
• 제24권1호
• /
• pp.1-8
• /
• 1991

North ore deposits of the Dunjeon gold mine is disseminated-stockworks deposits emplaced in Ordovician Dongjeom quartzite. Six types of fluid inclusions are recongnized in the stage I quartz. Among them polyphase inclusions(type-IV-A, B) are predominent in the lower part of stage I quartz crystals whereas liquid and gas inclusions(type I, II) are abundant in the upper part of the same quartz crystals. Liquid $CO_2$-bearing inclusions(type III-A, B)occur as pseudosecondary inclusions. Solid phases in polyphase inclusions are identified by using scanning electron microscopy combined with energy dispersive x-ray spectroscopy. The solid phases are as follows; halite, sylvite, hydrophyllite, quartz, muscovite, calcite, ankerite, K-Mg-Fe-Al-Si mineral, Ca-Fe-Si mineral, Mg-Al-Si mineral, two kinds of Fe-mineral and Cu-Fe mineral. Results of freezing and heating experiments of fluid inclusions and identification of daughter minerals in polyphase inclusions in the stage I quartz reveal that ore fluids were high saline system NaCl-KCl-$CaCl_2$-$H_2O$ in the earier stage and then evolved to rather simple system NaCl-$H_2O$ in the later stage, and temporally fluid mixing occured with system $CO_2$-$H_2O$. Homogenization temperatures and salinity of fluid inclusions in the stage I range from 290 to $454^{\circ}C$ and from 0.2 to 54.2 wt. % equivalent to NaCl.

• 에너지공학
• /
• 제2권1호
• /
• pp.54-67
• /
• 1993

CC1$_4$/CH$_4$/공기로 이루어진 예혼합 화염에 대한 2종류의 난류반응 모델을 Dow 케미칼사의 3차원 로타리 킬른 소각로에 적용하여 그 타당성을 확인하였다. 첫번째 난류반응 모델은 반응률이 반응물질의 난류혼합 속도에 지배된다는 fast chemistry 모델(모델 1)이고, 두번째 모델은 비평형 난류반응 모델(모델 2)로서 열량이 낮고 화염 억제 작용이 있는 산업폐기물인, CC1$_4$존재에 따른 반응감속을 연소속도 자료에 의해 고려한 모델이다. 수치해석의 결과에 의하면 CC1$_4$의 화염억제 작용을 적절히 고려한 두번째 비평형 난류반응 모델은 Dow 케미칼사 로타리 킬른의 출구에서 실험적으로 나타나는 농도 성층화 현상을 정성적으로 규명할 수 있었으며, CC1$_4$/CH$_4$몰비 변화에 따른 연소반응 지연 양상도 확인할 수 있었다. 기타 두 모델에 대한 비교 및 유동의 결과를 자세히 제시하였다.

• Korean Chemical Engineering Research
• /
• 제53권2호
• /
• pp.193-198
• /
• 2015

Polycaprolactone, Dichloromethane, 이산화탄소로 구성된 3성분계 고압 시스템의 상거동 측정 실험은 가변 부피 셀 장치를 이용해서 측정했다. 실험의 온도범위는 313.15 K에서 353.15 K, 압력은 약 300 bar까지 측정했으며 실험결과는 Polycaprolactone의 질량 분율이 1.0%, 2.0%, 3.0%일 때 온도와 이산화탄소/Dichloromethane의 질량 분율로 정리했다. 또한 실험 결과는 hybrid 상태방정식 (Peng-Robinson 상태방정식과 SAFT 상태방정식의 혼합형태) 을 이용하여 열역학적으로 검증하였으며, 혼합규칙은 반데르 발스의 단일 유체 혼합규칙을 사용했다. 이 다성분계 시스템에서 이원 상호 작용 파라미터 등, 각종 파라미터는 심플렉스 알고리즘을 통해 최적화했다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.159-162
• /
• 2002

Ferroelectric $YMnO_{3}$ thin films were etched with $Ar/Cl_{2}$ and $CF_{4}/Cl_{2}$ inductivly coupled plasma (ICP). The maximum etch rate of $YMnO_{3}$ thin film was $300{\AA}/min$ at a $Ar/Cl_{2}$ gas mixing ratio of 2/8, a RF power of 800 W, a dc bias of 200 V, a chamber pressure of 15 mTorr, and a substrate temperature of ${30^{\circ}C}$. From the X-ray photoelectron spectroscopy (XPS) analysis ， yttrium not only etched by chemical reactions with Cl radicals, but also assisted by Ar ion bombardments in $Ar/Cl_{2}$ plasma. In $CF_{4}/Cl_{2}$ plasma, yttrium are remained on the etched surface of $YMnO_{3}$ and formed of nonvolatile YFx compounds Manganese etched effectively by chemical reactions with Cl and F radicals. From the X-ray diffraction (XRD) analysis, the (0004) diffraction peak intensity of the $YMnO_{3}$ thin film etched in $Ar/Cl_{2}$ plasma shows lower value than that in $CF_{4}/Cl_{2}$ plasma. It is indicates that the crystallinty of $YMnO_{3}$ thin film is more easily damaged by the Ar ion bombardment than the changes of stoichiometry due to nonvolatile etch by-products.

• 한국광학회지
• /
• 제13권6호
• /
• pp.559-563
• /
• 2002

본 논문에서는 직접 고안한 scanned point-detecting system(SPDS)을 이용하여 PDP 방전 셀 내에서 방출되는 광을 3차원 적으로 시간 분해하여 측정하였다. PM tube를 통해 검출된 광 신호를 오실로스코프 상에서 파형을 확인하고 PC제어를 통해 결과를 얻었다. Ne-Xe(4%) 혼합가스가 400 ton압력으로 채워진 패널에서 측정한 시간 분해 결과를 살펴보면 패널의 전면판(top view)에서는 방전이 cathode전극의 안쪽 edge에서 시작되면서 cathode전극 바깥쪽으로 호의 형태를 이루면서 진행되는 것을 알 수 있었으며 패널의 측면(side view)에서 측정한 시간 분해 결과를 살펴보면 약 150$\mu\textrm{m}$의 높이까지 방전에 의한 광이 검출되었다. 그리고 구동전압 펄스가 인가된 후 730 ns에서 가장 큰 intensity가 나타났다.

• 반도체디스플레이기술학회지
• /
• 제11권4호
• /
• pp.25-30
• /
• 2012

In this study, we have investigated the effect of the substrate temperature and oxygen flow rate on the characteristics of IZO thin films for the organic light emitting diodes (OLED) devices. For this purpose, IZO thin films were deposited by RF magnetron sputtering at room temperature and $300^{\circ}C$ with various $O_2$ flow rate. In order to investigate the influences of the oxygen, the flow rate of oxygen in argon mixing gas has been changed from 0.1sccm to 0.5sccm. IZO thin films deposited at room temperature show amorphous structure, whereas IZO thin films deposited at $300^{\circ}C$ show crystalline structure having an (222) preferential orientation regardless of $O_2$ flow rate. The electrical resistivity of IZO film increased with increasing flow rate of $O_2$ under $Ar+O_2$. The change of electrical resistivity with increasing flow rate of $O_2$ was mainly interpreted in terms of the charge carrier concentration rather than the charge carrier mobility. The electrical resistivity of the amorphous-IZO films deposited at R.T. was lower than that of the crystalline-IZO thin films deposited at $300^{\circ}C$. The change of electrical resistivity with increasing substrate temperature was mainly interpreted in terms of the charge carrier mobility rather than the charge carrier concentration. All the films showed the average transmittance over 83% in the visible range.

• 한국자기학회지
• /
• 제10권6호
• /
• pp.285-290
• /
• 2000

본 연구에서는 Hexagonal Barium Ferrite(BaM) 박막을 RF magnetron sputtering system을 이용하여 상온에서 증착한후, 85$0^{\circ}C$에서 열처리하여 결정화하였다. XRD pattern을 통해 BaM 박막의 working pressure 10 mTorr에 대한 산소분압(Po$_2$)을 0~3 mTorr가지 변화하여 알아본 결과, 1 mTorr 이하의 산소분압(Po$_2$)에서는 spinel 상과 BaM 상이 함께 형성되었으나, 1 mTorr 이상의 높은 산소분압(Po$_2$)에서는 BaM 상만이 형성되는 것을 알 수 있었다. BaM 박막의 자기적특성을 VSM을 통하여 알아본 결과 산소분압(Po$_2$)이 증가함에 따라 수직보자력은 일정하게 감소를 하였으나 포화자화값은 1 mTorr가지 증가하다 감소하였다. 열처리 시간에 따른 결정화 정도와 특성을 알아본 결과 열처리를 시작한 뒤 10분 이내에 대부분의 특성변화가 일어났으며, 그 이상의 온도에서는 커다란 변화를 일으키지 않음을 알 수 있었다.

• 한국물환경학회지
• /
• 제31권2호
• /
• pp.94-102
• /
• 2015

Electro-coagulation experiments were conducted with aluminum (Al) or iron (Fe) electrode in order to determine the optimal electrode material and operation conditions for algae removal. Al electrode showed higher removal rate of algae than Fe electrode because Al flocs have positive surface charges which electrostatically attract algae species having negative surface charges. Removal rate of algae and total phosphorous (T-P) was increased as current density and electrode area increases. It was also found that initial pH with neutral range was optimum for T-P removal by electro-coagulation. Bench-scale continuous flow experiments consisted of electro-coagulation reactor, agitation tank and settling tank were conducted. In electro-coagulation reactor, a large fraction of Al flocs were distributed to scum layer, due to the gas bubbles generated by electrolysis reaction. In agitation tank, most of Al flocs were settled and the optimal mixing intensity was found to be 50 rpm to achieve good settleability. The removal rate of algae was about 90-95%. Additionally, the removal rate of the T-P and COD was observed to be $73.8{\pm}8.0%$ and $75.0{\pm}3.8%$, respectively. Meanwhile, the removal rate of total nitrogen (T-N) was relatively low at only 24%.

• 한국대기환경학회지
• /
• 제21권1호
• /
• pp.1-14
• /
• 2005

In this study, a Long Path Differential Optical Absorption Spectroscopy system (K-JIST LP-DOAS) has been used to simultaneously measure atmospheric monoaromatic hydrocarbons and other trace compounds. The validity of the K-JIST LP-DOAS for measuring atmospheric monoaromatic hydrocarbons was tested during a field campaign between 12 February and 14 March 2003 at an urban site in Seoul, Korea through inter-comparative measurements against a collocated on-line Gas Chromatography (GC) system. The concentrations of benzene, toluene, p-xylene, and m-xylene were measured with the K-JIST LP-DOAS system in the UV region (239～302 nm) over a 740 m beam path. For the other trace compounds, a longer spectral range (299～362 nm) was used. In order to remove the interference of atmospheric abundant species (such as oxygen, sulfur dioxide and ozone), two oxygen optical density spectra obtained at two pathlengths, 697 and 1133m, and reference spectra of sulfur dioxide and ozone were incorporated in the fitting procedure. The mean concentrations measured by our LP-DOAS during the measurement period were 0.77 ($\pm$0.38) ppbv for benzene, 3.68 ($\pm$1.90) ppbv for toluene, 0.41 ($\pm$0.19) ppbv for p-xylene, 0.54 ($\pm$0.24) ppbv for m-xylene. The concentration data of benzene, toluene, p-xylene and m-xylene obtained by our LP-DOAS were found to be in relatively good correlations with those of the online GC system. Pearson's coefficients in the observed concentrations between LP-DOAS and on-line GC were 0.84 for benzene, 0.83 for toluene and 0.65 for m,p-xylene. This study suggests that the LP-DOAS system can be used to provide reliable information on both the mixing ratios and temporal distribution characteristics of monoaromatic hydrocarbons in the urban air.

• Environmental Engineering Research
• /
• 제18권4호
• /
• pp.229-234
• /
• 2013

This study aimed to develop a new dust collecting system equipped with an activated carbon (A.C.) coated electrode. Before fabrication, pre-treatment of A.C. was performed to remove metal ions within the A.C. to enlarge its specific surface area. Then, pre-treated A.C., black carbon, polyvinyl acetate (PVAc), and methanol were mixed to make a gel compound, which was coated onto aluminum plates to fabricate electrodes. The optimal mixing ratio of A.C., black carbon, PVAc, and methanol was found to be 10 g: 2 g: 3 g: 20 mL. After fabrication, the electrodes were used in the batch-type experiment for $NH_3$ and $H_2S$ removal. The reduction rates of the gases were high at the beginning and slowly reduced with time. Dust collection experiments were conducted in continuous flow, with various voltages applied. Compared to 5 kV, dust removal efficiency was 1.5 times higher when 10 kV was applied. Increasing the number of electrodes applied also increased the collecting efficiency. The correlation coefficient between actual collecting efficiency and trend line was higher than 99%. Consequently, the novel dust collection system equipped with A.C. coated electrode appears to be a promising substitute for existing dust-control devices.