• Transactions on Electrical and Electronic Materials
• /
• 제17권3호
• /
• pp.146-149
• /
• 2016

The CrN/TiN/Al thin films for solar selective absorber were prepared by dc reactive magnetron sputtering with multi targets. The binary nitride CrN layer deposited with change in N₂ gas flow rates. The gas mixture of Ar and N2 was an important parameter during sputtering deposition because the metal volume fraction (MVF) was controlled by the N2 gas flow rate. In this study, the crystallinity and surface properties of the CrN/TiN/Al thin films were estimated by X-ray diffraction (XRD), atomic force microscopy (AFM) and field emission scanning electron microscopy (FESEM). The composition and depth profile of thin films were investigated using Auger electron spectroscopy (AES). The absorptance and reflectance with wavelength spectrum were recorded by UV-Vis-NIR spectrophotometry at a range of 300~1,100 nm.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.460-463
• /
• 2002

$MoO_3$ thin films were deposited on electrode and heater screen-printed alumina substrates in $O_2$ atmosphere by RF reactive sputtering using Molybdenum metal target. The deposition was performed at $300^{\circ}C$ with 350W of a forward power in an $Ar-O_2$ atmosphere. The working pressure was maintained at $3{\times}10^{-2}mtorr$ and all deposited films were annealed at $500^{\circ}C$ for 5hours. To investigate gas sensing characteristics of the addition doped $MoO_3$ thin film, Co, Ni and Pt were used as adding dopants. The sensing properties were investigated in tenn of gas concentration under exposure of reducing gases such as $H_2$, $NH_3$ and CO at optimum working temperature. Co-doped $MoO_3$ thin film shows the maximum 46.8% of sensitivity in $NH_3$ and Ni-doped $MoO_3$ thin film exhibits 49.7% of sensitivity in $H_2$.

• 한국생산제조학회지
• /
• 제20권3호
• /
• pp.257-262
• /
• 2011

A low capacity generator converted to high capacity of 40m3 is designed and developed in order to use the hydroxy gas in the steel manufacturing process. For efficient design, it is increased from 8 electrode tubes to 10 electrode tubes as well as expanding the diameter of cell integument up to two times bigger, which can increase the amount of hydrogen occurrence per a cell significantly. In addition, circulating pump and pipe, heat exchanger of affiliated SUS material have been used in the circulation of electrolysis catalyst, and circulating cooling section and piping design are also developed. The flame trap is designed into all-in-one suitable check valve in the flow rate of 28-35m3/h and its application is possibly applied in work operation. It is found that the efficiency of generator developed is enhanced substantially up to 84%. It is expected that the application in this field can be expanded significantly by this study.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.40-41
• /
• 2007

$SnO_2$ nanowires are used at the nanoscale level for the electrical transduction of the gas interaction with these sensing materials. We report on a study of high sensitivity and fast NOx gas sensor. We focused on improving the response time and refresh time by growth nanowires on the trench structure of Si substrate as air path. To improve refresh time we applied the trench structure with depth of $10\;{\mu}m$ by the inductively coupled plasma reactive ion etching(ICP-RIE). The fabricated device was measured at temperature of $200{\sim}300^{\circ}C$. The sensor exhibit ultra-fast and reversible electrical response (t90% ~4 s for response and ~3 s for recovery).

• Nuclear Engineering and Technology
• /
• 제45권3호
• /
• pp.347-360
• /
• 2013

This paper presents an experimental investigation of the small-break loss-of-coolant accident (SBLOCA) and the loss-of-feedwater accident (LOFW) in a scaled integral test facility of REX-10. REX-10 is a small integral-type PWR in which the coolant flow is driven by natural circulation, and the RCS is pressurized by the steam-gas pressurizer. The postulated accidents of REX-10 include the system depressurization initiated by the break of a nitrogen injection line connected to the steam-gas pressurizer and the complete loss of normal feedwater flow by the malfunction of control systems. The integral effect tests on SBLOCA and LOFW are conducted at the REX-10 Test Facility (RTF), a full-height full-pressure facility with reduced power by 1/50. The SBLOCA experiment is initiated by opening a flow passage out of the pressurizer vessel, and the LOFW experiment begins with the termination of the feedwater supply into the helical-coil steam generator. The experimental results reveal that the RTF can assure sufficient cooldown capability with the simulated PRHRS flow during these DBAs. In particular, the RTF exhibits faster pressurization during the LOFW test when employing the steam-gas pressurizer than the steam pressurizer. This experimental study can provide unique data to validate the thermal-hydraulic analysis code for REX-10.

• 한국화재소방학회논문지
• /
• 제33권3호
• /
• pp.1-8
• /
• 2019

ISO TC 92에서는 콘칼로리미터의 연소가스를 FT-IR 방식의 가스분석기로 분석하기 위한 표준을 개발하고 있다. 2018년에는 표준 초안(WD 21397)의 절차에 따라 6개 기관이 참여하여 표준 초안의 반복성 및 재현성을 평가하였다. 시험대상 시료는 polymethyl methacrylate (PMMA), 경질 폴리우레탄 보드 및 PVC 장판이었고 콘칼로리미터 시험결과 중 착화시간(s), 최대 열방출률(kW·m^-2), 총 방출열량(MJ·m^-2) 및 유효연소열(MJ·m^-2·kg^-1)을, 그리고 FT-IR 가스분석결과 중 독성가스의 최대 농도(µL·L^-1), 가스 발생량(g) 및 가스 수율(g·g^-1)을 ISO 5725-2에 따라 통계 분석하여 정밀도를 평가하였다. 이상치(outlier)는 발견되지 않았으며 콘칼로리미터 시험의 반복성(sr/m)은 1.5%, 재현성(sR/m)은 9.8%로 나타났고 FT-IR 가스분석의 반복성은 12.9%, 재현성은 27.9%로 나타났다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제45회 KOSCO SYMPOSIUM 초록집
• /
• pp.345-347
• /
• 2012

The secondary air injection influences the flow of the combustion gas in the furnace. Therefore, the analysis of the furnace should be careful in the selection of the turbulent model with CFD. In this study, CFD results of several turbulent models were compared with experimental results. Analysis results suggest to select turbulent models in the furnace secondary air nozzle.

• Journal of Welding and Joining
• /
• 제10권4호
• /
• pp.107-116
• /
• 1992

자동차 공업에서의 용접은 주로 차체조립공정에서 많은 사용되고 있으며 전기저항용접, ARC 용접, GAS용접등이 쓰이고 있지만 특히 전기저항용접의 SPOT WELDING이 그 대부분을 차 지하고 있다. 자사의 경우 AUTO GUN이나 ROBOT의 적용으로 차종에 따라 자동화가 거의 90%에 이르며 이 수치는 향후 더욱 증가 되리라 본다. 최근의 연비향상을 위한 경량화와 장 기방청성 요구추세에 따른 새로운 소재 즉 Al, 2층도금강판등의 채택에 따라 자사실정에 맞는 적합한 용접기술개발이 필요하다. 본론에서는 점용접의 검사 방법과 검사기준, 용접 신뢰성 확 보를 위한 제시도와 신소재 적용에 대응한 개발의 필요성, 용접 자동화등의 현황들을 자사를 중심으로 실례를 들어 소개하고자 한다.

• 한국항공우주학회지
• /
• 제33권3호
• /
• pp.99-106
• /
• 2005

액체로켓엔진 개발에서 필수 단계인 연소안정성 확인을 위한 연소안정성 평가시험(stability rating test) 방법의 개발을 위해서는 압력교란장치의 특성과 더불어 안전한 연소시험 절차(sequence)의 확립이 필수적이다. 따라서 본 연구에서는 연소안정성 평가시험을 위해 개발된 펄스건을 액체로켓엔진의 연소시험에 실제로 적용하기 위한 단계로서, 적절한 연소 시험 절차를 개발/검증하고자 하였다. 먼저 펄스건을 실제로 연소실 외벽에 장착하게 되는 압력파 유도장치를 설계하고, 펄스건의 오작동을 방지하기 위한 압력파 유도장치 내부의 냉각시스템의 설계 및 시험을 수행하였다. 이러한 일련의 연소시험 단계를 통하여 실물형 액체로켓엔진에서의 연소안정성 평가시험이 가능한 적절한 시험 단계를 국내 독자적으로 개발하는데 성공하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1818-1820
• /
• 1999

This paper presents direct ${\mu}c$-Si:H thin film growth on the glass substrates using RPCVD system (remote plasma chemical vapor deposition) in low temperature. Hydrogenated micro-crystalline silicon deposited by RPCVD system in low temperature is very useful material for photovoltaic devices, sensor applications, and TFTs (thin film transistors). Varying the deposition conditions such as substrate temperature, gas flow rate, reactive gas ratio $(SiH_4/H_2)$, total chamber pressure, and rf power, we deposited ${\mu}c$-Si:H thin films on the glass substrates (Corning glass 1737). And then we measured the structural and electrical properties of the films.