• 한국항공운항학회지
• /
• 제12권2호
• /
• pp.17-28
• /
• 2004

In unmanned aerial vehicle (UAV), the high temperature results from friction with the air, combustion of fuel and combustion gas of a nozzle etc. It causes serious problems in the UAV structure. The characteristic analysis of heat resistant metal and ceramic materials and creep analysis for the functionally graded material (FGM) is presented in this paper. FGM is composed of two constituent materials that are mixed up according to the specific volume fraction distribution in order to withstand high heat condition. In addition, the creep behavior of FGM applied in duct structure of an engine is analyzed.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2016년도 추계학술대회 논문집
• /
• pp.181-181
• /
• 2016

Hydrogenated microcrystalline silicon (${\mu}c-Si:H$) films have attracted much attention as materials of the bottom-cells in Si thin film tandem photovoltaics due to their low bandgap and excellent stability against light soaking. However, in PECVD, the source gas $SiH_4$ must be highly diluted by $H_2$, which eventually results in low deposition rate. Moreover, it is known that high-rate ${\mu}c-Si:H$ growth is usually accompanied by a large number of dangling-bond (DB) defects in the resulting films, which act as recombination centers for photoexcited carriers, leading to a deterioration in the device performance. During film deposition, Si nanoparticles generated in $SiH_4$ discharges can be incorporated into films, and such incorporation may have effects on film properties depending on the size, structure, and volume fraction of nanoparticles incorporated into films. Here we report experimental results on the effects of nonoparticles incorporation at the different substrate temperature studied using a multi-hollow discharge plasma CVD method in which such incorporation can be significantly suppressed in upstream region by setting the gas flow velocity high enough to drive nanoparticles toward the downstream region. All experiments were performed with the multi-hollow discharge plasma CVD reactor at RT, 100, and $250^{\circ}C$, respectively. The gas flow rate ratio of $SiH_4$ to $H_2$ was 0.997. The total gas pressure P was kept at 2 Torr. The discharge frequency and power were 60 MHz, 180 W, respectively. Crystallinity Xc of resulting films was evaluated using Raman spectra. The defect densities of the films were measured with electron spin resonance (ESR). The defect density of fims deposited in the downstream region (with nonoparticles) is higher defect density than that in the upstream region (without nanoparticles) at low substrate temperature of RT and $100^{\circ}C$. This result indicates that nanoparticle incorporation can change considerably their film properties depending on the substrate temperature.

• 상하수도학회지
• /
• 제18권2호
• /
• pp.201-207
• /
• 2004

Dissolved air flotation (DAF) is a solid-liquid separation process that uses fine rising bubbles to remove particles in water. Most of particle-bubble collision occurs in the DAF contact zone. This initial contact considered by the researchers to play a important role for DAF performance. It is hard to make up conceptual model through simple mass balance for estimating collision efficiency in the contact zone because coupled behavior of the solid-liquid-gas phase in DAF system is 90 complicate. In this study, 2-phase(gas-liquid) flow equations for the conservation of mass, momentum and turbulence quantities were solved using an Eulerian-Eulerian approach based on the assumption that very small particle is applied in the DAF system. For the modeling of turbulent 2-phase flow in the reactor, the standard $k-{\varepsilon}$ mode I(liquid phase) and zero-equation(gas phase) were used in CFD code because it is widely accepted and the coefficients for the model are well established. Particle-bubble collision efficiency was calculated using predicted turbulent energy dissipation rate and gas volume fraction. As the result of this study, the authors concluded that bubble size and recycle ratio play important role for flow pattern change in the reactor. Predicted collision efficiency using CFD showed good agreement with measured removal efficiency in the contact zone. Also, simulation results indicated that collision efficiency at 15% recycle ratio is higher than that of 10% and showed increasing tendency of the collision efficiency according to the decrease of the bubble size.

• 한국수소및신에너지학회논문집
• /
• 제35권3호
• /
• pp.280-289
• /
• 2024

In this study, a cryogenic vessel was constructed to maintain and control the safe pressure of liquid hydrogen boil-off gas (BOG), and the numerical analysis was conducted on the development of computational fluid dynamics model inside the high-pressure vessel. An evaluation system was constructed using cryogenic inner and outer containers, pre-cooler, upper flange, and internal high-pressure container. We attempted to analyze the performance of the safety valve by injecting relatively high temperature hydrogen gas to generate BOG gas and quickly control the pressure of the high-pressure vessel up to 10 bar. As a results, the liquid volume fraction decreased with a rapid evaporation, and the pressure distribution increased monotonically inside a high pressure vessel. Additionally, it was found that the time to reach 10 bar was greatly affected by the filling rate of liquid hydrogen.

• Environmental Analysis Health and Toxicology
• /
• 제5권3_4호
• /
• pp.19-28
• /
• 1990

Nitroarenes are ubiquitous environmental pollutants displaying potent mutagenicity in bacteria and carcinogenicity in mammal. In this study, the concentration of nitroarenes in coarse and fine particles and mutagenicity of POC$\_$N/ fraction was investigated in suspended particulates at the Shinchon and Bulkwang area of Seoul. The suspended particulates were collected bimonthly by a high volume cascade impactor air sampler from July 1987 to May 1988. Extractable organic matter was obtained by ultrasonic extraction on diethly ether/cyclohexane (8/2, v/v). Neutral fraction was obtained by liquid-liquid extraction. Polar neutral organic compounds (POC$\_$N/) was fractionated by thin-layer chromatography. Finally, the concentrations of nitroarenes in POC$\_$N/ fraction were measured and determined by capillary gas chromatography. Direct and indirect mutagenicity of POC$\_$N/ fraction were measured using Salmonella typhimurium TA 98. The result were as follows: 1) Major nitroarenes at the Shinchon area was 1-nitropyrene and at the Bulkwang area it was 2,7-dinitro-9-fluorenone during the year. 2) Average concentration of total nitroarenes measured was 67.26 ng/m$^3$in fine particles which was 1,3 folds higher that in coarse particle (52.30 ng/m$^3$). 3) Annual pattern of nitroarenes concentrations revealed that concentration during heating season (Feb., Jan., Mar.) was 2.2 folds higher than that in non heating season (May, Jul., Sep.). Concentration of each season has 157.68 ng/m$^3$and 80.39 ng/m$^3$. 4) The mutagenic activity of POC$\_$N/ fraction from fine particles was higher compared to that of coarse particles and was increased when metabolically activated, with 59 mixture. Mutagenicities, Metabolically activated, were significantly different between Shinchon and Bulkwang area, 322.8 rev/250 $\mu\textrm{g}$/plate and 286.8 rev/250 $\mu\textrm{g}$/plate, respectively. 5) Annual pattern of mutagenicity of POC$\_$N/ fraction revealed that mutagenicity during the heating season was 1.7 folds higher at Shinchon area and 1.2 folds higher at Bulkwang than during the non heating season. The variable contents and levels of nitroarenes in suspended particulates may affect human health significantly. Further studies such as risk assessment should be conducted on the basis of these kind of studies.

• Tuberculosis and Respiratory Diseases
• /
• 제60권6호
• /
• pp.631-637
• /
• 2006

배 경: 만성폐쇄성폐질환 환자의 호흡곤란은 일반적으로 폐활량에 반비례하나 유사한 폐기능에서도 서로 다른 호흡곤란을 호소한다. 본 연구는 만성폐쇄성폐질환 환자에서 우심실박출계수와 호흡곤란의 정도와 연관관계가 있는지를 알아보고자 한다. 방 법: 호흡곤란의 정도는 Medical Research Council (MRC) 호흡곤란척도로 분석하였고, MRC 4/5도인 중증군 24명과, MRC 2/3도인 중등증군 16명을 비교 분석하였다. 심전도게이트 일회통과법을 이용한 방사성동위원소 심조영술을 이용하여 우심실 박출계수를 구했으며, 안정시 동맥가스분석 및 폐기능검사를 시행하였다. 결 과: 기저 폐기능에서 잔기량의 예측치 평균이 (%) 중증군에서($210{\pm}87$) 중등증군($160{\pm}27$)에 비해 유의하게 증가되었으나(P < 0.03), 폐활량 및 확산계수 등에서는 유의한 차이가 관찰되지 않았다. 우심실 박출계수(%)는 중증군에서($25{\pm}8$) 중등증군($35{\pm}6$)에 비해 유의하게 감소되었으나(P < 0.001), 동맥혈가스는 두 군 사이에 유의한 차이가 관찰되지 않았다. 다중회귀분석을 통해 우심실 박출계수가 독립적으로 호흡곤란에 영향을 미치는 인자로 밝혀졌다. 결 론: 만성폐쇄성폐질환에서 우심실 박출계수가 호흡곤란의 정도에 영향을 미치는 것으로 보인다.

• 전기화학회지
• /
• 제8권4호
• /
• pp.155-161
• /
• 2005

상용 CFD 프로그램인 FLUENT v5.3을 이용하여 용융탄산염 연료전지 스택의 수치 모사를 행하였다. FLUENT에 포함되어 있는 보존식들을 이용하면서, 사용자 정의함수를 이용하여 포함시킨 코드를 통해 전기화학적 반응과 부반응인 수성가스전이반응에 의한 질량과 가스 조성 변화 및 열이동을 고려하여 정확한 계산 결과를 얻고자 하였다. 모사에 사용된 스택은 6kW급과 25kW급 스택으로 각각 20개와 40개의 단위전지를 수직으로 적층한 형태이며 스택내로 주입되는 가스는 coflow형태로 각각의 채널을 흘러가게 설계되어 있다. 모사를 통해 알아본 스택 내 압력분포는 가스 흐름방향으로 압력강하가 일어나며 anode 채널보다 cathode 채널에서의 압력차가 더 크게 나타났다. 채널 내 속도분포는 전극 반응에 의한 질량 및 부피변화로 인해 anode 채널에서는 가스흐름 방향으로 속도가 증가하는 반면 cathode 채널에서는 속도가 감소하는 경향을 보였다. 스택 내 온도분포는 가스 흐름방향으로 증가하는 경향을 보였고, 계산결과와 실험결과가 대체로 일치함을 확인할 수 있었다. 수성가스전이반응을 포함한 모델과 그렇지 않은 모델을 비교한 결과 가스의 주입구 부분에서는 수성가스전이반응에 의해 흡열 반응이, 출구 부분에서는 발열반응이 일어나고, 이로 인해 입구와 출구의 온도차가 더 커짐을 확인하였다. 따라서 상용화 스택인 수백 kW급 이상의 대형 스택을 모사하기 위해서는 수성가스전이반응을 고려해야할 것으로 생각된다.

• 한국분말재료학회지
• /
• 제19권2호
• /
• pp.140-145
• /
• 2012

This paper describes the manufacturing process of tilting pad gas bearing with a diameter of 5 mm and a length of 0.5-1 mm for power MEMS (Micro Electomechanical Systems) applications. The bearing compacts with nanopowder feedstock were prepared by Ni-metal mold with 2-mold system using LIGA process. The effect of the manufacturing conditions on sintering properties of nanopowder gas bearing was investigated. In this work, Fe-45 wt%Ni nanopowder with an average diameter of 30-50 nm size was used as starting material. After mixing the nanopowder and the wax-based binders, the amount of powder was controlled to obtain the certain mixing ratio. The nanopowder bearing compacts were sintered with 1-2 hr holding time under hydrogen atmospheres and under temperatures of $600^{\circ}C$ to $1,000^{\circ}C$. Finally, the critical batch of mixed powder system was found to be 70% particle fraction in total volume. The maximum density of the sintered bearing specimen was about 94% of theoretical density.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.763-768
• /
• 2011

최근 대두되고 있는 바이오가스(Biogas)를 이중 희박 예혼합 가스터빈 연소기에 적용하기 위한 연구로써, 기존 개발된 실물형 이중 희박 예혼합 연소기 버너헤드에 바이오가스 조성을 모사한 $CO_2$ 희석 연료를 사용하여, 가스터빈 연소기의 연소불안정에 미치는 영향을 연구하였다. 이중 스월이 적용된 이중화염에서 연료분배율(Pilot fuel mass fraction)에 따라 화염구조가 상이하며 이에 따라 연소장의 온도분포와 연소불안정 특성이 결정된다. 동압신호와 phase-resolved $OH^*$ 이미지를 통해 연료분배율 변화와 $CO_2$ 희석률 증가에 따른 연소불안정 크기 감소와 그 경향을 알 수 있었다. $CO_2$ 희석에 의해 열방출 섭동의 크기가 감소하고 화염속도가 감소하며 이에 따라 화염면의 팽창 즉, 체적의 증가로 인해 연소불안정이 감소되는 것을 실험을 통해 확인하였다.

• Corrosion Science and Technology
• /
• 제17권3호
• /
• pp.109-115
• /
• 2018

Electrical Resistance Welding (ERW) on a longitudinal seam-welded pipe has been extensively used in oil and gas pipelines. It is well known that the weld zone commonly suffers from grooving corrosion in ERW pipes. In this paper, the grooving corrosion performances of API X65 grade non-sour service (steel-A) and API X70 grade sour gas resistant (steel-B) steel electrical resistance welding pipelines were evaluated. The microstructure of the bondline is composed of coarse polygonal ferrite grains and several elongated pearlites. The elongated pattern is mainly concentrated in the center of the welded area. The grooving corrosion test and electrochemical polarization test were conducted to study the corrosion behavior of the given materials. A V-shaped corrosion groove was found at the center of the fusion zone in both the steel-A and steel-B ERW pipes, as the corrosion rate of the bondlines is higher than that of the base metal. Furthermore, the higher volume fraction of pearlite at the bondline was responsible for the higher corrosion rate at the bondline of both types of steel.