• 멤브레인
• /
• 제25권3호
• /
• pp.295-300
• /
• 2015

PDMS에 NaA zeolite를 0~40 wt% 가하여 PDMS-NaA zeolite 막을 제조하였다. SEM 관찰에 의하면 PDMS-NaA zeolite 막 내에 분산되어있는 NaA zeolite 입자의 크기는 $2{\sim}5{\mu}m$이었다. PDMS-NaA zeolite 막의 $N_2$와 $H_2$ 투과도는 막 내의 NaA zeolite 함량이 증가하면 증가하였고, $N_2$보다는 $H_2$의 투과도가 더 컸다. 그리고 PDMS-NaA zeolite 선택성($H_2/N_2$)은 NaA zeolite 함량이 증가하면 증가하였다.

• Journal of Magnetics
• /
• 제13권4호
• /
• pp.170-172
• /
• 2008

Fe-6.5% Si alloys have good magnetic properties due to their high electrical resistivity, very low magneto-striction, and low crystalline anisotropy. Despite their strong potential, these alloys have seldom been used in magnetic applications because of the very poor ductility of Si-steel above 3.0 wt% Si [1-4]. It is difficult to achieve compressed Fe-6.5% Si powder cores with excellent properties because of the low density due to poor ductility. In compressed powder cores, high density is essential in order to obtain high magnetization and permeability. In this study, an attempt was made to produce Fe-3%Si powder cores because the Fe-3.0 wt% Si alloys have relatively good magnetic properties and room temperature ductility. Gas atomized Fe-3.0 wt% Si powder was compressed into toroid shape cores. By reducing the Si content to 3.0 wt%, the hysteresis loss could be greatly reduced and thus the total core loss could be minimized. The total core loss is 600 mW/$cm^3$ at 0.1 T and 50 kHz.

• 한국세라믹학회지
• /
• 제32권9호
• /
• pp.989-994
• /
• 1995

Rigid porous carbon fiber composites with the uniform pore size distribution were prepared by vacuum forming from water slurries containing carbonized PAN fibers, a phenolic resin and ceramic binders. The composites were designed to use for highly efficient carbon fiber filters for particulate filtration and gas adsorption. As the as-received carbon fibers of 1mm in length were milled to an approximate average length of 300${\mu}{\textrm}{m}$, modulus of rupture (MOR) of the composite filter was increased from 1MPa to the value larger than 5 MPa. Modulus of rupture (MOR) for the composite filter fabricated using the milled carbon fiber was increased from 5 MPa to 10 MPa as the carbonization temperature of the PAN fiber was raised from 90$0^{\circ}C$ to 140$0^{\circ}C$. The air permeability and an average pore size of the composite filter were increased from 40 to 270cc/min.$\textrm{cm}^2$ and from 35 to 80${\mu}{\textrm}{m}$, respectively, as the apparent porosity increased from 80 to 95%. It was shown that the MOR of the carbon fiber composite filter was dependent primarily on the average length of carbon fiber, carbonization temperature and the type of bonding materials.

• 한국식품저장유통학회지
• /
• 제7권1호
• /
• pp.1-7
• /
• 2000

To develop natural antimicrobial agents for keeping qualities of postharvested greenhouse produce the antimiocrobial actions of Polygonum cuspidatum Sieb. et Zucc. extract , which showed remarkable antimicrobial effects against microorganism causing the postharvest decay of greenhouse produce, were investigate. In the inhibitory experiment of enzymes related to energy production metabolism hexokinase activities decreased to 73% and 68% by treating with Polygonum cuspidatum Sieb. et.Zucc. extract and Eugenia caryophyllata Thumnberg extract in comparison with control, respectively. Direct visualization of microbial cells by using both transmission electron microscope and scanning electron microscope showed that microbial cell membrane was destroyed by treating with the dilute extract solution. this change of celluloar membrane permeability could be identified in the experiment that 0-nitrophenyl-${\beta}$-D-galactopyrano-side(ONPG), the artificial substrate of ${\beta}$-galactosidase, was hydrolyzed in the presence of the extract, indicating that the membrane was perturbed. The separation and identification of the most antimicrobialo substances isolated from Polygonum cuspidatum Sieb et. Zucc. extract and Eugenia caryophyllata Thunberg extract were carried out by using gas chromatography and mass spectrometry 9GC/MSD), which were identified as eugenol. As a result, the functionality of Polygonum cuspidatum Sieb. et Zucc. extract and Eugenia caryophyllata Thunberg extract as antimicrobial agents for keeping qualities of postharvested greenhouse produce may be recommended.

• Korean Membrane Journal
• /
• 제6권1호
• /
• pp.16-23
• /
• 2004

The silica containing carbon (C-SiO$_2$) membranes were fabricated using poly(imide siloxane) (PIS) having -CO- swivel group. The characteristics of porous C-SiO$_2$ structures prepared by the pyrolysis of poly(imide siloxane) were related with the micro-phase separation between the imide block and the siloxane block. Furthermore, the nitrogen adsorption isotherms of the CMS and the C-SiO$_2$ membranes were investigated to define the characteristics of porous structures. The C-SiO$_2$ membranes derived from PIS showed the type IV isotherm and possessed the hysteresis loop, which was associated with the mesoporous carbon structures, while the CMS membranes derived from PI showed the type I isotherm. For the molecular sieving probe, the C-SiO$_2$ membranes pyrolyzed at 550, 600, and 700$^{\circ}C$ showed the O$_2$ permeability of 924, 1076, and 367 Barrer (1 ${\times}$ 10$\^$-10/㎤(STP)cm/$\textrm{cm}^2$$.$s$.$cmHg) and O$_2$/N$_2$ selectivity of 9, 8, and 12.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1995년도 춘계 총회 및 학술발표회
• /
• pp.11-15
• /
• 1995

Polysulfone (PS) membranes were prepared by the phase inversion process using water or isopropanol as nonsolvent. The Flory-Huggins theory for a ternary system nonsolvent/solvent/polymer is applied to describe the thermodynamic equilibria of the components. The calculated ternary phase equilibria show that demixing of a PS binary solution with n-methylpyrrolidone (NMP) will be fast in a water coagulation bath and will be delayed in an isopropanol bath. The prepared membranes were characterized by SEM, gas adsorption-desorption measurement, and permeability test. The membrane, which is precipitated by fast demixing in a water bath, has nodular structures in the skin region and includes finger-like cavities in the sublayer. The membrane coagulated by isopropanol has a very dense and thick skin structure, which is formed by delayed demixing. The membrane coagulated by isopropanol showed considerably lower pore volume and surface area compared to that observed with water coagulation method. With dimethylformamide (DMF) as solvent and 2-3 wt% of water, the solution can show the liquid-liquid phase separation due to agglomation of the polymer-lean phase from the homogeneous solution. The membranes, which were coagulated near an equilibrium state, show the large (micron size) round pores in the whole membranes. The pores do not contribute the permeation characteristics.

• International Journal of Automotive Technology
• /
• 제8권2호
• /
• pp.165-177
• /
• 2007

Predictions of diesel particulate filtration are typically made by modeling of a particle collection, and providing particle trapping levels in terms of a pressure drop. In the present study, a series of single channel diesel particulate filter (DPF) experiments are conducted, the pressure traces are inversely analyzed and essential filtration parameters are deducted for model closure. A DPF filtration model is formulated with a non-linear description of soot cake regression. Dependence of soot cake porosity, packing density, permeability, and soot density in filter walls on convective-diffusive particle transportation is examined. Sensitivity analysis was conducted on model parameters, relevant to the mode of transition. Soot cake porosity and soot packing density show low degrees of dispersion with respect to the Peclet number and have asymptotes at 0.97 and $70\;kg/m^3$, respectively, at high Peclet number. Soot density in the filter wall, which is inversely proportional to filter wall Peclet number, controls the filtration mode transition but exerts no influence on termination pressure drop. The percolation constant greatly alters the extent of pressure drop, but is insensitive to volumetric flow rate or temperature of exhaust gas at fixed operation mode.

• 멤브레인
• /
• 제23권1호
• /
• pp.54-60
• /
• 2013

PEGDA/PETEDA dendrimer 막은 PEGDA에 5~15 wt%의 PETEDA dendrimer를 첨가하고 UV를 조사하여 제조하였다. 제조된 막의 특성은 FT-IR, $^1H$-NMR 그리고 DSC를 통해 분석하였다. PEGDA/PETEDA dendrimer 막의 유리전이온도($T_g$)는 PETEDA dendrimer의 함량이 증가할수록 감소하였다. $CH_4$에 대한 $CO_2$ 투과 특성은 PETEDA dendrimer의 함량과 압력을 변화시키며 조사하였다. 10 wt%의 PETEDA dendrimer를 포함하는 막의 투과도는 162.2 barrer였으나 $CO_2/CH_4$ 이상분리 인자는 31.8로 가장 높게 나타났다.

• 한국포장학회지
• /
• 제27권1호
• /
• pp.17-23
• /
• 2021

Recent studies on recyclable materials in the packaging have an increased attention due to the eco-friendly policies of reducing carbon dioxide emissions in worldwide. Roasted coffee beans mostly packed in multi-layered films and papers according to their expiration date. To satisfy both recyclability and barrier properties, researches have been continued on paper-based packaging materials to enhance their properties. In this study, packaging materials for coffee beans are developed by laminating bioplastic films on papers. The tests of packaging materials were performed with mechanical properties, gas and water vaper permeability, recyclability and storage quality for coffee beans. Compared to other samples, the paper/bioplastics-based coffee package composed of starch coated papers and two bioplastics showed the lowest barrier properties, comparable mechanical strength and ability to maintain the quality of roasted coffee beans. Thus, it could be a good alternative for multi-layered packages for roasted coffee beans.

• Korean Journal of Chemical Engineering
• /
• 제35권11호
• /
• pp.2290-2295
• /
• 2018

An acceleration stress test (AST) was performed to evaluate the durability of a polymer membrane in a polymer electrolyte membrane fuel cell (PEMFC) for 500 hours. Previous studies have shown that hydrogen crossover measured by linear sweep voltammetry (LSV) increases when the polymer membrane deteriorates in the AST process. On the other hand, hydrogen crossover of the membrane often decreases in the early stages of the AST test. To investigate the cause of this phenomenon, we analyzed the MEA operated for 50 hours using the AST method (OCV, RH 30% and $90^{\circ}C$). Cyclic voltammetry and transmission electron showed that the electrochemical surface area (ECSA) decreased due to the growth of electrode catalyst particles and that the hydrogen crossover current density measured by LSV could be reduced. Fourier transform infrared spectroscopy and thermogravimetric/differential thermal analysis showed that -S-O-S- crosslinking occurred in the polymer after the 50 hour AST. Gas chromatography showed that the hydrogen permeability was decreased by -S-O-S- crosslinking. The reduction of the hydrogen crossover current density measured by LSV in the early stages of AST could be caused by both reduction of the electrochemical surface area of the electrode catalyst and -S-O-S- crosslinking.