• Applied Science and Convergence Technology
• /
• 제23권3호
• /
• pp.139-144
• /
• 2014

GaN deposition equipment and processes for the fabrication of white LEDs (Light Emitting Diode) using MOCVD (Metal Organic Chemical Vapor Deposition) were numerically modeled to analyze the effects of a reactive gas introduction strategy. The source gases, TMGa and $NH_3$, were injected from a shower head at the top of the chamber; the carrier gases, $H_2$ or $N_2$, were introduced using two types of injection structures: vertical and horizontal. Wafers sat on the holder at a radial distance between 100 mm and 150 mm. The non-uniformity of the deposition rates for vertical and horizontal injection were 4.3% and 3.1%, respectively. In the case of using $H_2$ as a carrier gas instead of $N_2$, the uniform deposition zone was increased by 20%.

• 한국수소및신에너지학회논문집
• /
• 제33권6호
• /
• pp.795-802
• /
• 2022

Korea is showing its appearance as a leading country in the hydrogen economy by establishing policies for revitalizing the hydrogen economy and enacting the 「Hydrogen Economy Promotion and Hydrogen Safety Management Act」 for the first time in the world. In addition, domestic hydrogen facilities are using hydrogen energy safely through world-class safety management compared to overseas advanced countries. However, in order to enhance the safety of the rapidly diversifying hydrogen industry and rapid technology development, such as the introduction of liquefied hydrogen, some institutional improvements are needed. In this regard, this paper intends to analyze the results of safety inspections on 13 representative facilities and prepare safety improvement plans to establish preemptive safety measures.

• Korean Chemical Engineering Research
• /
• 제62권3호
• /
• pp.253-261
• /
• 2024

The impact of temperature on electrode reactions in 100 cm² molten carbonate cells operating as Fuel Cells (FC) and Electrolysis Cells (EC) was examined using the Reactant Gas Addition (RA) method across a temperature range of 823 to 973 K. The RA findings revealed that introduction of H₂ and CO₂, reduced the overpotential at Hydrogen Electrode (HE) in both the modes. However, no explicit temperature dependencies were observed. Conversely, adding O₂ and CO₂ to the Oxygen Electrode (OE) displayed considerable temperature dependencies in FC mode which can be attributed to increased gas solubility due to the electrolyte melting at higher temperatures. In EC mode, there was no observed temperature dependence for overpotential. Furthermore, the addition of O₂ led to a decrease in overpotential, while CO₂ addition resulted in an increased overpotential, primarily due to changes in the concentration of O₂ species.

• 분석과학
• /
• 제15권1호
• /
• pp.7-14
• /
• 2002

본 연구에서는 레이저 애블레이션 이온 트랩 질량분석법을 이용하여 금속 및 세라믹 시료들에 대한 원소분석을 수행하였고, 이때 이온화 장치로는 XeCI 엑시머 레이저를 사용하였고 검출장치로서 이온트랩 질량 분석기를 사용하였다. 시료는 트랩의 바깥에 장착하여 시료의 교환이 매우 쉽도록 하였고 고체시료의 분석에 있어서 매우 효과적임을 밝혔다. 헬륨기체의 압력이나 이온저장시간, 초기질량제한 RF 전압 등에 대한 기초 실험을 통하여 실험의 최적 조건을 구하였고 (헬륨 기체압력 $1{\times}10^{-4}$ Torr 이온 저장시간 100 ms 초기 질량 제한전압 $1150V_{p-p}$), 이 결과를 토대로 금속시료(구리, 몰리브데늄)와 세라믹 시료(알루미나 세라믹, 지르코니아 세라믹) 들에 대한 원소분석을 수행하였다.

• 에너지공학
• /
• 제28권4호
• /
• pp.48-60
• /
• 2019

정부는 2015년 파리협정 이후, 미세먼지 종합관리 대책(2017), 수소경제 활성화 로드맵(2019) 등을 통해 수소 보급을 위한 다양한 정책을 추진하고 있다. 그 일환으로 2022년까지 수소공급을 위한 충전소 310개소의 구축 목표를 발표하였다. 이를 위해 융·복합, 패키지형, 이동식 수소충전소의 도입을 위한 특례를 제정·공포하였다. 이동식 수소충전소는 여러 지역에 수소를 공급가능한 장점이 있는 반면, 설비의 이동과 집약적 설치로 인해 적정한 설치기준과 운영안전성 확보가 필요하다. 본 연구에서는 이동식 수소충전소 표준모델 설계와 정량적 위험성 평가(QRA)를 실시하여 도입 가능성을 검토하였다. QRA 결과, 개인적, 사회적 위험도는 가용한 것으로 나타났으며, 도입에 대한 실증방향과 시사점을 도출하였다.

• International Journal of Aeronautical and Space Sciences
• /
• 제15권2호
• /
• pp.123-137
• /
• 2014

The aviation gas turbine is composed of many expensive and highly precise parts and operated in high pressure and temperature gas. When breakdown or performance deterioration occurs due to the hostile environment and component degradation, it severely influences the aircraft operation. Recently to minimize this problem the third generation of predictive maintenance known as condition based maintenance has been developed. This method not only monitors the engine condition and diagnoses the engine faults but also gives proper maintenance advice. Therefore it can maximize the availability and minimize the maintenance cost. The advanced gas turbine health monitoring method is classified into model based diagnosis (such as observers, parity equations, parameter estimation and Gas Path Analysis (GPA)) and soft computing diagnosis (such as expert system, fuzzy logic, Neural Networks (NNs) and Genetic Algorithms (GA)). The overview shows an introduction, advantages, and disadvantages of each advanced engine health monitoring method. In addition, some practical gas turbine health monitoring application examples using the GPA methods and the artificial intelligent methods including fuzzy logic, NNs and GA developed by the author are presented.

• 한국생산제조학회지
• /
• 제19권2호
• /
• pp.301-305
• /
• 2010

Cutting procedures where qualities are determined by various demand factors largely influences shipbuilding productivity. Particularly, defects in cutting shapes and cutting surface results in delay for post shipbuilding stages such as in welding and assemblage lines which could become factors for reduced economic viability of the project. Existing cutting procedures utilize fossil fuels such as propane or ethylene as the main fuel component and these methods applied particularly to ship plate cutting gives relatively slow cutting speed and generates large quantities of harmful and sometimes poisonous polluting fumes of which warrants an urgent need to look for alternative cutting methods. Recent introduction of hydrox gas generated by electrically dissociating water into hydrogen and oxygen components to be utilize as an alternative cutting fuel has resulted not just in visible improvement on cutting quality and speed over the existing methods but it has also been welcomed as an environmentally friendly clean fuel source. This paper has been prepared to serve as the basis for accommodating this environmentally friendly hydrox gas cutting method into actual working environment by observing and recording hydrox gas cutting thermal characteristics.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2014년도 제49회 KOSCO SYMPOSIUM 초록집
• /
• pp.71-72
• /
• 2014

The current paper introduce the flame transfer function calculation results using CFD in order to quantify the heat release fluctuations in a lean premixed gas turbine combustor. Comparisons of the modeled and measured flame shapes were made using the optimized heat transfer conditions.

• 터널과지하공간
• /
• 제2권1호
• /
• pp.123-151
• /
• 1992

“Norwegian Tunnelling in General" will cover the following subjects : - Short introduction to the geology of Norway - Major considerations in rock installations - Hydropower plants, roads, tunnels, oil and gas storage in rock, drinking water storage, sewage plants, frozen food storage, defence and civil defence projects, including sports arenas and swimming pools, etc.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 2010년도 춘계학술 발표회
• /
• pp.65-65
• /
• 2010