• 제목/요약/키워드: Gas generator

검색결과 757건 처리시간 0.027초

부하차단시험에 의한 서인천복합화력 발전기.제어계의 모델링 및 검증 (Modeling and verification of generator/control system of Seo-Inchon combined-cycle plant by load rejection test)

  • 최경선;문영환;김동준;추진부;류승헌;권태원
    • 대한전기학회논문지
    • /
    • 제45권4호
    • /
    • pp.501-510
    • /
    • 1996
  • The gas-turbine generator of Seo-Incheon combined-cycle plant was tested for derivation of a model for dynamic analysis. Load rejection and AVR step test was performed to get the dynamic response of generator. The parameters of generator/control system model were determined by these measured data. No-load saturation test was performed for the saturation characteristics of the generator under steady state. V-curve test was also performed so as to find exact generator parameters. Q-axis parameters of generator was derived by measuring power angle. AVR and governor constants have been tuned by their oscillatory period and setting time characteristics. The derived parameters of generator control system is verified by one-machine infinite bus system simulation. (author). 7 refs., 20 figs., 5 tabs.

  • PDF

연료 과농 가스발생기의 연소 가스 물성치에 관한 연구 (Study on Combustion Gas Properties of a Fuel-Rich Gas Generator)

  • 서성현;한영민;김성구;최환석
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2006년도 제26회 춘계학술대회논문집
    • /
    • pp.118-122
    • /
    • 2006
  • 액체 로켓 엔진용 가스발생기 개발을 위해서는 추진제 혼합비에 따른 연소 가스의 열역학적 물성치 예측이 필수적이다. 본 연구에서는 Lox/Jet A-1 조합의 연료 과농 가스발생기의 실 추진제 연소 시험을 통해 전체 혼합비에 따른 연소 가스의 생성 온도를 계측하였다. 연소실 내 동압 섭동 측정 및 정압 측정 결과를 이용하여 비열비, 가스 상수, 정압 비열과 같은 물성치를 간접적으로 산출해내었다. 본 실험값은 보간 계수를 이용한 예측 결과와 비교해보았을 때 동일한 대표 값을 가지는 것으로 나타나, 보간 계수 예측 방법이 설계 도구로 충분히 적용 가능하다는 것을 확인하였다.

  • PDF

축소형 가스발생기 연소안정성 연구 (Study on Combustion Stability of Sub-scale Gas Generator)

  • 안규복;강동혁;김문기;임병직;김종규;서성현;최환석
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2010년도 제35회 추계학술대회논문집
    • /
    • pp.594-596
    • /
    • 2010
  • 추력 75톤급 액체로켓엔진용 가스발생기의 초기 검증을 위해 축소형 모델에 대한 연소시험이 수행되었다. 본 논문에서는 축소형 가스발생기 연소시험 중 발생한 저주파 연소불안정에 대하여 분석을 수행하였다.

  • PDF

액체로켓엔진 가스발생기 개발에서의 연소불안정 경험 사례 (Experience Cases of Combustion Instability in Development of Gas Generator for Liquid Rocket Engine)

  • 김문기;임병직;김성구;김종규;최환석
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2017년도 제48회 춘계학술대회논문집
    • /
    • pp.61-64
    • /
    • 2017
  • 한국형발사체에 적용되는 액체로켓엔진은 가스발생기 개방형 엔진 사이클을 채택한다. 가스발생기에서 연소 불안정이 발생하면 연소 성능이 변하고 진동, 소음 등의 문제점을 야기하거나 하드웨어의 손상을 초래할 수 있다. 본 연구에서는 액체로켓엔진의 가스발생기를 개발하면서 나타난 연소불안정 경험 사례를 소개하고자 한다.

  • PDF

터보펌프 조립체-가스발생기 연계 개회로 시험에서의 시동특성 분석 (Analysis of Startup Characteristics for Turbo Pump Unit-Gas Generator Open Loop Test)

  • 문윤완;김승한;설우석
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2008년도 제31회 추계학술대회논문집
    • /
    • pp.15-18
    • /
    • 2008
  • 본 연구에서는 터보펌프 조립체-가스발생기 연계시험 중 개회로 시험에 대한 시동 특성을 분석하였고 수치적으로 해석하였다. 시험에서 터빈의 시동 및 구동은 수소 기체로 수행하였고 그에 따른 가스발생기 점화 및 연소압의 발달을 살펴보았고 해석도 동일한 조건으로 수행하여 결과를 비교하였다. 회전수의 발달 특성은 시험과 잘 일치하는 것을 볼 수 있었고 가스발생기 연소압 발달 특성의 경우 정성적인 기울기가 일치하는 것을 볼 수 있었다.

  • PDF

터보펌프 조립체-가스발생기 연계 폐회로 시험에서의 시동특성 분석 (Analysis of Startup Characteristics for Turbo Pump Unit-Gas Generator Closed Loop Test)

  • 문윤완;김승한;설우석
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2008년도 제31회 추계학술대회논문집
    • /
    • pp.19-22
    • /
    • 2008
  • 본 연구에서는 터보펌프 조립체-가스발생기 연계시험 중 폐회로 시험에 대한 시동 특성을 분석하였고 수치적으로 해석하였다. 시험에서 터빈의 시동은 수소 기체로 수행하였고 구동은 가스발생기에서 연소로 발생하는 연소 기체로 작동하였다. 그에 따른 가스발생기 점화 및 연소압의 발달을 살펴보았고 해석도 동일한 조건으로 수행하여 결과를 비교하였다. 회전수의 발달 특성은 시험과 잘 일치하는 것을 볼 수 있었고 가스발생기 연소압 발달 특성의 경우 정성적으로 일치하는 것을 볼 수 있었다.

  • PDF

축소형 가스발생기 연소안정성 특성 (Combustion Stability Characteristics in Sub-scale Gas Generator)

  • 안규복;강동혁;김문기;임병직;김종규;최환석
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2011년도 제36회 춘계학술대회논문집
    • /
    • pp.69-72
    • /
    • 2011
  • 추력 75톤급 액체로켓엔진용 가스발생기의 초기 검증을 위한 세 번째 축소형 모델에서 연소시험이 수행되었다. 본 논문에서는 세 번째 축소형 가스발생기 모델의 연소시험 중 발생한 저주파 연소불안정에 대한 분석 결과를 기술하였다. 이러한 저주파 압력섭동은 연소실 압력, 산화제/연료 분사기의 차압과 연관된 것으로 판단된다.

  • PDF

양방향 펄스 전원에 의한 배기가스의 제거 (The Removal of Flue Gas by Using Bidirectional Pulse Generator)

  • 전재룡;성기범;고광철;강형부
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1999년도 하계학술대회 논문집 E
    • /
    • pp.2224-2226
    • /
    • 1999
  • Non-thermal plasma techniques is applied in many fields. Recently acid rain, global warming, ozone depletion, and smog are preeminent environmental problems. The cause for this environmental problems is the flue gas. Non-thermal plasma techniques has an attention for the solution of flue gas. Non-thermal plasma is used for the removal of flue gas composed of NOx, etc. This field has grown dramatically. This experiment is performed by using cylinder type reactor under the condition of room temperature and atmosphere pressure. NO gas is used instead of flue gas. Bidirectional pulse generator is used instead of the unidirectional pulse generator to increase the efficiency.

  • PDF

고속 발전기 직접 구동 방식의 터보 제너레이터 시스템 개발 (The Development of the Turbo-Generator System with direct driving High Speed Generator.)

  • 노민식;권정혁;변지섭
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2003년도 하계종합학술대회 논문집 V
    • /
    • pp.2769-2772
    • /
    • 2003
  • This paper presents results of the development of the Turbo-generator system with structure which is HSG(High Speed Generator) installed to high speed gas-turbine engine directly. Turbo-generator with high speed motor-generator directly has many advantages aspects of weight, size, lubrication system and complexity of the system compared of conventional turbo-generator system with gear-box. But because of direct high speed operation of the high speed generator, we have to need stable high speed motor driving algorithm for perfect engine ignition when gas turbine starting. Also we have to need design of the PCU(Power Conditioning Unit) for converting high speed AC output power to conventional AC power or needed DC power.

  • PDF

PAD 모델링을 통한 분리메카니즘 시뮬레이션 기법 (Simulation of Separation Mechanism by Modeling a Propellant Actuated Device)

  • 오석진;이도형
    • 한국추진공학회지
    • /
    • 제14권6호
    • /
    • pp.45-52
    • /
    • 2010
  • 본 논문에는 분리장치 종류 중 하나인 가스푸셔와 가스발생기의 수학적-물리적 모델이 기술되어있다. 준정상상태 모델이 가스푸셔와 가스발생기로 구성된 PAD의 성능해석을 위해 도입되었다. 실험적 상수인 열손실계수와 마찰계수는 시험에 의해 결정되었다. 그레인 형상설계에 기초한 가스발생기와 가스푸셔 내부의 연소과정, 유동과 피스톤 거동이 수치해석적 방법으로 시뮬레이션 되었다. 개발된 예측기법은 향후 유사한 분리메카니즘 시스템 설계시에 유용하게 사용될 수 있을 것이다.