• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 추계학술대회 논문집
• /
• pp.179-180
• /
• 2009

• 한국산업융합학회 논문집
• /
• 제23권6_1호
• /
• pp.907-915
• /
• 2020

Specification selection, Layout, specifications and combinations of Power Drives, and Ship motions were studied for FGPP(Floating Gas-fired Power Plants), which are still needed in areas such as the Caribbean, Latin America, and Southeast Asia where electricity is not sufficiently supplied. From this study, the optimal equipment layout in ships was derived. In addition, the difference between engine and turbine was verified through LCOE(Levelized Cost of Energy) comparison according to the type and combination of Power Drives. Analysis of Hs(Significant Height of wave) and Tp(spectrum Peak Period of wave) for places where this FGPP will be tested or applied enables design according to wave characteristics in Brazil and Indonesia. Normalized Sloshing Pressures of FGPP and LNG Carrier are verified using a sloshing analysis program, which is CFD(Computational Fluid Dynamics) software developed by ABS(American Bureau of Shipping). Power Transmission System is studied with Double bus with one Circuit Breaker Topology. A nd the CFD analysis allowed us to calculate linear roll damping coefficients for more accurate full load conditions and ballast conditions. Through RAO(Response Amplitude Operator) analysis, we secured data that could minimize the movement of ships according to the direction of waves and ship placement by identifying the characteristics of large movements in the beam sea conditions. The FGPP has been granted an AIP(Approval in Principle) from a classification society, the ABS.

• 해양환경안전학회지
• /
• 제15권3호
• /
• pp.269-274
• /
• 2009

LNGC(Liquefied Natural Gas Carrier)의 역사는 1959년 $5,000m^3$ 급 LNG선 "Methane Pioneer"호를 시작으로 1969년에는 $71,500m^3$ 급, 1973년에는 Moss Type의 최초 LNG운반선 "Norman Lady($87,600m^3$)호, 1980년대 $125,000m^3$ 급을 시작으로 1990년대를 거처 $135,000m^3$ 급, 2007년 $210,000m^3$급 그리고 2008년에는 $266,000m^3$ 급의 초대형 액화천연가스 운반선이 출현하였다. 또한 2006년 11월에는 기존 내 외연 기관이 아닌 발전기 기동으로 Propeller를 움직이는 DFDE(Duel Fuel Diesel Electric)엔진, 육상의 Storage Tank를 생략한 기화설비를 갖춘 LNG-RV(Re-gasification Vessel)와 주 기관은 Slow Diesel을 택하고, 운항 중 발생하는 BOG(Boil Off Gas)를 재액화시키는 설비를 갖춘 DRL(Diesel Re-Liquefaction)선박 및 해상 LNG 생산 저장시설인 LNG-FPSO(Floating Production and Storage Offshore), 그리 고 해상 LNG 인수기지 역할을 하는 LNG-FSRU(Floating Store and Re-gasification Unit) 등이 개발되었다. 이 논문에서는 LNG Project, 전 세계 에너지 시장과 LNGC의 발전 추세에 대하여 다루었다.

• 한국결정성장학회지
• /
• 제1권1호
• /
• pp.39-50
• /
• 1991

적외선 집중가열 방식의 FZ장치를 이용하여 floation zone 결정 성장기술을 변형한 traveling solvent floating zone(TSFZ)기술로 yttrium iron garnet(YIG: Y3Fe5O12) 단결정을 성장하였다. 또한 TSFZ기술을 확립하기 위하여 단결정 성장시 미치는 여러 가지 영향을 조사하였다. 성장된 YIG결정은 직경이 5~6mm, 길이가 15~36mm이었으며, 이때 성장조건은 성장속도 1mm/h, 회전속도 30rpm, gas flow rate 0.2 1/min, zone aspect ratio 0.9~1, convexity 0.29이었다.

• Composites Research
• /
• 제27권2호
• /
• pp.59-65
• /
• 2014

대부분의 에너지는 전세계적으로 제한되어 있는 석유, 석탄, 천연가스 등 주로 화석연료로부터 얻어지고 있다. 최근, 고유가, 석유자원의 고갈, 기후변화 등이 신재생에너지를 포함한 비화석 연료가 세계적으로 주목을 받고 있는 이유 중의 하나이다. 이 연구에서는 고비강성 및 비강도, 고내부식성 및 내화학성 등을 장점으로 갖고 있는 펄트루젼 FRP(PFRP)를 사용하였다. 따라서 부유식 구조물의 설계와 시공을 위해서는 PFRP 재료가 우선적으로 선택될 수 있다. 추적식 수상 태양광발전 구조물의 설계는 유한요소해석 결과를 사용하여 수행되었으며, 구조물은 조립되어 수상에 설치되었다. 구조물을 설치하기 전에 안전성 문제를 유한요소법을 사용하여 검토하였으며, 그 결과 설계, 제작, 시공된 구조물은 외적으로 작용된 하중을 지지하는데 충분히 안전함을 알 수 있었다.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2009년도 특별논문집
• /
• pp.24-34
• /
• 2009

The latest trend of development for submarine oil field is caused by the drained oil and gas for ground field, and FPSO is a keyword as the development for submarine oil field. FPSO (Floating Production Storage Offloading) is a kind of vessel type have a topside system for production of oil and gas and store them until the oil or gas can be offloaded onto a tanker or transported through a pipeline. Prior to the introduction of reinforcement under the pull-in winch on the STP extended top as the object of this paper, the technical background shall be introduced such as FPSO and the system and main equipments for STP as follows. The original structural concept for reinforcement of pull-in winch on the STP top and extended structure on moonpool was proposed by buyer's engineering team but it was much modified and improved in accordance with builder's fabrication and construction method.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권3호
• /
• pp.342-347
• /
• 2015

플로팅 엘엔지선박은 해상에서 LNG 생산 및 천연 가스 공급을 담당하는 새로운 개념으로 부유식 생산설비는 과도한 투자 비용으로 인해 개발 지연중인 한계 가스전에 활력을 주고 있으며, 부유식 공급설비는 육상 LNG 인수기지 인프라가 미비한 지역에 에너지를 경제적이며 효과적으로 공급할 수 있다는 장점을 제공하고 있다. LNG 화물창은 플로팅 엘엔지선박에서 생산 또는 적재된 LNG를 보관하는 주요기능 중 하나이다. 본 연구를 통해 기존 화물창 시스템들의 장점을 결합한 복합 화물창 시스템을 화물창 시스템의 설계 개선방안으로 제안하였고 플로팅 엘엔지선박에의 적용 타당성에 대한 연구를 수행하였다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2003년도 총회 및 춘계학술발표회
• /
• pp.196-200
• /
• 2003

A gas chromatography/mass spectrometric assay method was developed for the simultaneous determination of ethylene glycol monomethyl ether (EGME) and diethylene glycol monomethyl ether (DEGME) in spilled aviation fuels. Ethylene glycol monobutyl ether (EGBE) and ethylene glycol monoethyl ether (EGEE) were used as internal standard and surrogate, respectively. The sample preparation consists of back-extraction with 7 mL of methylene chloride after extraction of 50 mL of fuel with 2 mL of water. The extract was concentrated to dryness and dissolved with 100L of methanol and analyzed by CC-MS (SIM). The peaks had good chromatographic properties by using semi-polar column and the extraction of these compounds from fuel also gave high recoveries of 75 and 85 % with small variations for EGME and DEGME, respectively. Method detection limits were 1.3 ng/mL for EGME and 1.0 ng/mL for DEGME in spilled fuel. The method may be useful for fuel-type differentiation between kerosene and JP-8, which may originate from the storage tank.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.528-532
• /
• 2009

Integrated Gasification Combined Cycle (IGCC) power plant converts coal to syngas, which is mainly composed with hydrogen and carbon monoxide, by the gasification process and produces electric power by the gas and steam turbine combined cycle power plant. The purpose of this study is to investigate the influence of gasification process to type and structure of gasifier. For this purpose, the performance characteristics of gasification reaction are analyzed with the operation characteristic of pilot-scale 2-stage coal gasifier. It is found that gasification reaction, floating characteristic of melted slag, particle stick of inside of the gasifier, particle stick and deposit of Syngas cooler are the causes in the different performance characteristics.

• 상하수도학회지
• /
• 제13권4호
• /
• pp.35-44
• /
• 1999

In this study, it was attempted to remove nitrate and carbon in a single-stage reactor using acetate as substrate. Hybrid type upflow sludge baffled filter reactor was adopted using anaerobic sludge. Sludge bed in the bottom of reactor was intended to remove carbon and nitrate by denitrification and methanogenesis. And floating media in the upper part of reactor were intended to remove remaining carbon which was not removed due to the inhibition of nitrogen oxide on methane producing bacteria. The reactor removed over 96% of COD and most of nitrate with volumetric loading rate of $4.0kgCOD/m^3{\cdot}day$, hydraulic retention time of 24hr, 4,000mgCOD/L, and $266mgNO_3-N/L$. Nitrate in anaerobic sludge was converted to nitrogen gas(denitrification) or ammonia (ammonification) according to pH of influent, COD removal efficiency was easily affected by the change of volumetric loading rates and nitrate concentration. And when influent pH was about 4.7, most nitrate changed to ammonia while when influent pH was about 6.8~7.0, most nitrate denitrified independent of $COD/NO_3-N$ ratio. Most granules were gray and a few were black. In gray-colored granule, black inner side was covered with gray substance and SEM illustrated Methanoccoci type microorganisms which were compact spherical shape. Anaerobic filter removed residual COD effectively which was left in sludge bed due to the inhibition of nitrogen oxide.