• Journal of the Korean Society of Safety
• /
• v.33 no.3
• /
• pp.33-38
• /
• 2018

Defects in piping caused by corrosion or external impact of underground piping can lead to high risk of rupture of the piping due to high pressure. Flammable gas can be immediately ignited when discharged from piping, causing a jetfire. The damage of the radiant heat not only threatens the health of the workers who work in the industry but also the health of the people living in the neighboring residential areas. It is important to prevent and prepare before an accident occurs. In this study, three types of flammable gas underground piping accident scenarios were investigated, and the ranges of influence were determined using Phast ver7.2. and finally regression models were formulated to predict the ranges using excel and Matlab.

• Journal of the Korean Institute of Gas
• /
• v.7 no.3 s.20
• /
• pp.1-6
• /
• 2003

This study has suggested a decision method which determine optimum investment level for safety management by process risk assessment at gas governor station. Hazard and operability study(HAZOP), fault tree analysis(FTA) and consequence analysis(CA) were carried out and potential accident cost and benefit for safety management were estimated. As a result, we could be found the trend of safety cost and benefit by the nonlinear regression method and could be determined the optimum investment level for safety management from analysis of safety management cost and potential accident cost.

• Journal of the Korea Safety Management & Science
• /
• v.8 no.6
• /
• pp.29-39
• /
• 2006

The effect of parameters on the consequence of the flash fire accident by the release of heavy gas(in this study, xylene vapor) was analyzed. Simulation results showed that the distance with the lower flammable limit($X_{LFL}$) was increased with the increase of the release hole diameter. For the case of the elevated release, $X_{LFL}$ was increased with the increase of the wind speed and the release height, but $X_{LFL}$ was not affected by the wind speed for the release on the ground level. Therefore, the accident in the elevated release was more dangerous than the release on the ground level. In this condition, the release height had more effect on $X_{LFL}$ at the night time than the daytime and in the urban area than the rural area.

• Nuclear Engineering and Technology
• /
• v.52 no.5
• /
• pp.1051-1065
• /
• 2020

Safety analysis of nuclear power plant (NPP) especially in accident conditions is a basic and necessary issue for applications and commercialization of reactors. Many previous researches and development works have been conducted. However, most achievements focused on the safety reliability of primary pressure system vessels. Few literatures studied the structural safety of huge concrete structures surrounding primary pressure system, especially for the fourth generation NPP which allows existing of through cracks. In this paper, structural safety reliability of concrete structures of HTR-PM in accidental double-ended break of hot gas ducts was studied by Exceedance Probability Method. It was calculated by Monte Carlo approaches applying numerical simulations by Abaqus. Damage parameters were proposed and used to define the property of concrete, which can perfectly describe the crack state of concrete structures. Calculation results indicated that functional failure determined by deterministic safety analysis was decided by the crack resistance capability of containment buildings, whereas the bearing capacity of concrete structures possess a high safety margin. The failure probability of concrete structures during an accident of double-ended break of hot gas ducts will be 31.18%. Adding the consideration the contingency occurrence probability of the accident, probability of functional failure is sufficiently low.

• Nuclear Engineering and Technology
• /
• v.54 no.12
• /
• pp.4534-4550
• /
• 2022

Integrated severe accident codes should be capable of simulating not only specific physical phenomena but also entire plant behaviors, and in a sufficiently fast time. However, significant uncertainty may exist owing to the numerous parametric models and interactions among the various phenomena. The primary objectives of this study are to present best-practice uncertainty and sensitivity analysis results regarding the evolutions of severe accidents (SAs) and fission product source terms and to determine the effects of mitigation measures on them, as expected during a short-term station blackout (STSBO) of a reference pressurized water reactor (optimized power reactor (OPR)1000). Three reference scenarios related to the STSBO accident are considered: one base and two mitigation scenarios, and the impacts of dedicated severe accident mitigation (SAM) actions on the results of interest are analyzed (such as flammable gas generation). The uncertainties are quantified based on a random set of Monte Carlo samples per case scenario. The relative importance values of the uncertain input parameters to the results of interest are quantitatively evaluated through a relevant sensitivity/importance analysis.

• Journal of the Korean Society of Safety
• /
• v.38 no.4
• /
• pp.15-22
• /
• 2023

LPG-related accidents, which account for half of all gas accidents in Korea, have not shown any sign of decrease over the past decade, partially owing to the lack of effective safety improvement measures. The purpose of this study was to identify the effectiveness of improvement measures by analyzing the traits of accidents in terms of human factors, and to seek more effective accident prevention strategies. In this study, 108 accident cases were collected and analyzed in the aspect of accident characteristics such as violation type, human factors, and so on. The results showed that the work procedures of suppliers and engineers related to LPG accidents seemed to be similar in outward appearance; however, specific accident causes and unsafe behaviors were different. Particularly, type and target of violations were different, which could be visually confirmed by the Principal Component Analysis (PCA) and the Quantification Techniques (QT). Furthermore, for engineers, insufficient supervision was a major influencing factor. In conclusion, because the accident characteristics of suppliers and engineers are different, differentiated accident prevention strategies should be implemented, which was discussed in this study.

• Journal of the Korean Institute of Gas
• /
• v.18 no.3
• /
• pp.67-74
• /
• 2014

Buried natural gas pipelines in densely populated urban areas have serious hazards of property damages and casualties generated by release, dispersion, fire and explosion of gas caused by outside or inside failures. So as to prevent any accident in advance, managers implement danger management based on quantitative risk analysis. In order to evaluate quantitative risk about buried natural gas pipelines, we need calculation for radiant heat and pressure wave caused by calculation for release rate of chemical material, dispersion analysis, fire or explosion modeling through consequence analysis in priority, in this paper, we carry out calculation for release rate of pressured natural gas, radiant heat of fireball based in accident scenario of actual "San Bruno" buried high pressured pipelines through models which CCPS, TNO provide and compare with an actual damage result.

• Journal of the Korean Institute of Gas
• /
• v.18 no.1
• /
• pp.8-16
• /
• 2014

In this study, the number of gas accidents prediction model was suggested by analyzing the gas accidents occurred in Korea. In order to predict the number of gas accidents, simple moving average method (3, 4, 5 period), weighted average method and exponential smoothing method were applied. Study results of the sum of mean-square error acquired by the models of moving average method for 4 periods and weighted moving average method showed the highest value of 44.4 and 43 respectively. By developing the number of gas accidents prediction model, it could be actively utilized for gas accident prevention activities.

• Journal of the Korean Institute of Gas
• /
• v.2 no.1
• /
• pp.90-98
• /
• 1998

In order to establish detailed plans for fire protection and reduce the possible fire accidents in the future, collection of domestic and foreign fire accident cases and fundamental analysis are very important. In this study the classification model for fire accidents was developed and the direction to a new model was suggested by comparison ours with the accidents classification model of NFPA of United States of America and Japan. A new developed PC-based database program for fire accidents (FADBS) was used to analyse fire accidents easily and efficiently.

• Journal of the Korean Institute of Gas
• /
• v.17 no.4
• /
• pp.26-32
• /
• 2013

The best way to prevent major occupational accidents is prohibiting use of hazardous substances such as flammable gas, toxic gas whereas using alternative substances that ensured safety. but if there are no economic efficiency and substituting technologies of alternative substances, the best way is preparing to prevent accidents thoroughly. Therefore, this study has developed and selected release scenarios to use and apply for consequence analysis and emergency action plan for HF charging process of chemical plants that have HF release accidents and high probability of release accidents.