• 제목/요약/키워드: Gas Explosion Accident

검색결과 183건 처리시간 0.034초

프로빗모델을 통한 밀폐공간에서의 증기운폭발 과압에 의한 인체피해예측 (A Study on Estimation of Human Damage for Overpressure by Vapor Cloud Explosion in Enclosure Using Probit Model)

  • 임사환;이종락;허용정
    • 한국가스학회지
    • /
    • 제12권1호
    • /
    • pp.42-47
    • /
    • 2008
  • 환경친화적인 에너지원으로서 가스의 수요가 날로 급증하고 있다. 또한 가스의 수요와 더불어 가스사용이 늘어나면서 폭발과 화재에 의한 인명피해가 해마다 증가하고 있다. 따라서, 본 연구에 사용된 실험용 부스의 밀폐된 공간에서의 증기운폭발 과압의 피해를 Hopkinson의 삼승근법을 이용하여 계산하고, 인체에 미치는 영향을 프로빗 모델에 적용하여 피해예측을 평가하였다. 그 결과 프로빗 모델에 적용하여 계산하면 3 m 이격된 인체에는 손상가능성이 전혀 없는 0%로 나타났으며, 25 m 이격되면 고막파열 손상가능성이 전혀 없는 것으로 나타났다.

  • PDF

밀폐공간에서의 VCE에 의한 건물피해예측에 관한 연구 (A Study on Estimation of Structure Damage caused by VCE in Enclosure)

  • 임사환;허용정;이종락
    • 한국산학기술학회:학술대회논문집
    • /
    • 한국산학기술학회 2007년도 춘계학술발표논문집
    • /
    • pp.42-45
    • /
    • 2007
  • This paper is estimation of structure damage caused by VCE(Vapor Cloud Explosion) in enclosure. As we estimate the influence of damage which occur at gas facility in factory. We can utilize it the elementary data of safety distance. In this study, the influence of explosion over-pressure caused by VCE in enclosure was calculated by using the Hopkinson's scaling law and the accident damage was estimated by applying the influence on the adjacent structure into the probit model. As a result of the damage estimation conducted by using the probit model, both the damage possibility of explosion overpressure to structures 20 meters away and that of overpressure to glass bursting 80m meters away showed nothing.

  • PDF

BLEVE로 인한 과압 예측에 관한 연구 (A Study on the Overpressure Estimation of BLEVE)

  • 김인태;김인원;송희열
    • 한국가스학회지
    • /
    • 제4권1호
    • /
    • pp.69-76
    • /
    • 2000
  • BLEVE로 인한 위험을 평가하기 위한 프로그램, BLEVE ESTIMATOR를 이용하여 온도에 따른 폭발량과 Flashing mass를 계산하였고, 부천 가스충전소의 사고를 모델로 피해를 예측하였으며, 상용프로그램인 Dupont의 SAFER 프로그램과 비교하였다. 폭발량과 Flashing mass는 폭발온도의 증가에 따라 지수함수로 증가하였으며, Propane이 n-Butane보다 상대적으로 높게 나타났다. 용기의 온도, 압력, 충전비가 높을수록 Overpressure가 높게 나타났다.

  • PDF

폭발방지를 고려한 LPG 저장탱크 최적설계 (The Optimal Design of Explosion Prevention for LPG Storage Tank)

  • 임사환;허용정;손석우;임재기
    • 한국산학기술학회:학술대회논문집
    • /
    • 한국산학기술학회 2010년도 춘계학술발표논문집 2부
    • /
    • pp.949-952
    • /
    • 2010
  • The utilization of LPG(Liquefied Petroleum Gas) is increasing as an environmental-friendly fuel in all countries making green growth new paradigm, and use of gas is spread fast as motor fuels to decrease air pollution. Loss of lives by explosion and fire is happening every year as gas use increases, and gas accident in large scale storage property is causing serious problems socially. To minimize this problem, underground containment type storage tank is being presented as an alternative recently. In this study, to minimize explosion occurrence in underground containment type storage tank, the suitable storage tank is designed to consider explosion prevention that makes exposure surface area minimize in confined contents volume and flame to construct storage tank by the most suitable condition in the underground containment room. As a result of the design of storage tank having the most suitable condition by this research, underground containment space was minimized on diameter 3m, length 4.83m in 20 tons storage tank and its safety was improved as exposure surface area in flame decreased by 89.4%, compared with the existent storage tank.

  • PDF

내압방폭을 위한 Safe Gap의 측정에 관한 연구 (A Study on the Safe Gap for Explosion-proof)

  • 오규형
    • 한국가스학회지
    • /
    • 제1권1호
    • /
    • pp.1-6
    • /
    • 1997
  • 가연성 가스가 존재하는 위험 분위기에서 전기기기를 사용할 경우 전기 스파크에 의한 폭발위험성이 존재하기 때문에 점화원을 격리시키거나 고립시키는 것이 필요하지만 현실적으로 점화원의 고립이 불가능하므로 폭발을 방지하기 위한 일반적인 방법으로 내압 방폭형전기기기를 사용하고 있다. 따라서 내압방폭기기의 내부에 침투한 가연성 가스가 폭발하여도 화염이나 열이 틈새를 통과하여 외부의 가연성 분위기를 점화시킬 수 없는 최대 틈새크기를 찾아야 할 필요가 있다. 본 논문에서는 수소-공기 혼합기와 메탄-공기 혼합기에 대하여 실험적 최대틈새크기(MESG)를 찾아내어 기존의 결과와 비교하고, MESG에 영향을 미치는 요인들을 찾아내고자 하였다. 실험장치는 내용적 8${\iota}$의 구형용기를 사용하였으며 실험 변수들로는 전화위치, 혼합기의 농도, 초기압력 등이었다. 실험결과 각각의 변수들에 의해 영향을 받으며 특히 농도와 초기압력에 크게 영향을 받는 것을 알 수 있었으며, 당량 농도 가까이에서 최소값을 나타내었으며 초기압력의 상승과 함께 MESG는 감소하였다.

  • PDF

화학공장에서의 BTX누출에 의한 화재$\cdot$폭발 영향 평가 (An Evaluation of the Fire and Explosion Effect by BTX released in a Chemical Plant)

  • 박기창;김병직
    • 한국가스학회지
    • /
    • 제4권3호
    • /
    • pp.9-18
    • /
    • 2000
  • 화학공장에서 발생가능한 사고 피해범위의 예측은 주변 건축물이나 공장간 위치설정 및 배치(layout) 또는 안전장치의 배치 등에 기본자료로 활용될 수 있다. 또한, 사고 후의 결과를 예측할 수 있기 때문에 사고발생에 대한 최적의 비상조치계획을 수립할 수 있어 매우 중요하다. 따라서 본 연구에서는 BTX(Benzene, Toluene, Xylene) 누출에 의한 화재 및 폭발의 영향을 평가하고자 하였다. 영향평가의 모사를 위해 Visual basic 언어를 사용한 프로그램을 개발하였다. 기상조건을 고려하여 실제 사고사례에 적용성을 높였다. 화재의 경우에는 Pool fire로 인한 피해를 예측할 수 있도록 하였고, 폭발의 경우에는 UVCE(Unconfined Vapor Cloud Explosion)로 인한 손실을 예측할 수 있도록 하였다. 화재는 화염에서 나오는 복사열을 피해 정도를 예측하는 기준으로 사용하였고, 폭발은 과압을 기준으로 하였다. 각각의 결과를 이용해 probit 분석을 할 수 있도록 하였다. 폭발모델의 경우, 누출된 벤젠에 대하여 사고점으로부터 20 m이내 지점은 심각한 구조적 손상을 보였으며, 60 m이상의 지점에서는 경미한 피해가 추정됨을 알 수 있었다. 화재모델의 경우, 누출되어 방유제에 고여있는 벤젠에 대하여 복사열로 인한 직접적인 피해는 여름보다는 겨울에 크며, 내륙에 위치한 도시일수록 큰 경향을 보이는 것으로 추정할 수 있었다. 복사열로 인한 피해가 $90\%$일 때 40m 이상에서는 직접적인 영향이 없는 것으로 추정할 수 있었다.

  • PDF

RESEARCH EFFORTS FOR THE RESOLUTION OF HYDROGEN RISK

  • HONG, SEONG-WAN;KIM, JONGTAE;KANG, HYUNG-SEOK;NA, YOUNG-SU;SONG, JINHO
    • Nuclear Engineering and Technology
    • /
    • 제47권1호
    • /
    • pp.33-46
    • /
    • 2015
  • During the past 10 years, the Korea Atomic Energy Research Institute (KAERI) has performed a study to control hydrogen gas in the containment of the nuclear power plants. Before the Fukushima accident, analytical activities for gas distribution analysis in experiments and plants were primarily conducted using a multidimensional code: the GASFLOW. After the Fukushima accident, the COM3D code, which can simulate a multidimensional hydrogen explosion, was introduced in 2013 to complete the multidimensional hydrogen analysis system. The code validation efforts of the multidimensional codes of the GASFLOW and the COM3D have continued to increase confidence in the use of codes using several international experimental data. The OpenFOAM has been preliminarily evaluated for APR1400 containment, based on experience from coded validation and the analysis of hydrogen distribution and explosion using the multidimensional codes, the GASFLOW and the COM3D. Hydrogen safety in nuclear power has become a much more important issue after the Fukushima event in which hydrogen explosions occurred. The KAERI is preparing a large-scale test that can be used to validate the performance of domestic passive autocatalytic recombiners (PARs) and can provide data for the validation of the severe accident code being developed in Korea.

선박 탱크 내부 도장작업 중 발생한 화재·폭발 사고원인 분석 (An Accident Investigation of Fire and Explosion Case During Painting Work in the Tank of the Crude Oil Carrier)

  • 안병준;정기혁;임종국
    • 한국가스학회지
    • /
    • 제22권3호
    • /
    • pp.20-31
    • /
    • 2018
  • 한국의 조선업은 짧은 기간에도 불구하고 규모나 질적 면에서 놀라운 성장을 이루어냈다. 하지만 최근 7년간의 산업재해 통계를 분석했을 때, 조선업 평균 사고사망만인율이 1.48로 전업종 0.66대비 2배가 넘고, 재해율 또한 0.93%로 전업종 평균 0.57% 대비 높은 것으로 나타나 세계조선 강국이라는 말을 무색하게 하고 있다. 따라서 2017년 유조선 탱크 내부에서 도장 작업 중 발생한 사고에 대한 분석을 통해 한국 조선업의 현재를 진단하고자 하였다. 사고 요인 도출을 위해 ECFC(Effects and causal factors charting)를 이용하였으며, 점화원 및 가연물에 대한 분석을 위해 실험, 측정 및 CFD를 이용한 시뮬레이션을 실시하였다.