• 한국대기환경학회지
• /
• 제29권4호
• /
• pp.486-503
• /
• 2013

This paper has comprehensively reviewed fine dust control technology from emission sources. Owing to the stringent national regulation, domestic industries have made consistent efforts to develop the high efficiency facilities since 1960s. In these days, harmful particulate pollutants including dioxins and PAHs as well as $PM_{2.5}$ are also of critical interests in government and civic groups. In addition, simultaneous treatment of gas and particles is being widely studied. It is believed that hybrid facilities which integrate a few advanced equipment may meet the atmospheric guidelines.

• 대한기계학회논문집B
• /
• 제28권1호
• /
• pp.9-15
• /
• 2004

$CO_2$ is a well-known green house gas as well as the major source of global warming. Many researchers have studied to reduce $CO_2$ emission in combustion processes. Among the method for reducing $CO_2$ emission, oxygen-enriched combustion has been proposed. Because its adiabatic flame temperature is relatively too high, existing facilities must be changed or the flame temperature in the combustion zone should be reduced. The combustion characteristics, composition in the flame zone, temperature profile and emission gases were investigated experimentally for the various oxygen-enriched ratios(OER) by the addition of $CO_2$, under constant $O_2$ flow rate. Results showed that the reaction zone was quenched and broadened as the addition of $CO_2$ was increased. The emission of NOx in flue gas was decreased as decreasing temperature in reaction zone. It was also shown that the reaction was delayed by the cooling effect. As the addition of $CO_2$ was increased, the composition of CO in the flame zone was increased due to the increase of reaction rate by increasing mixing effect of oxidant/fuel at OER=0％, but the composition of CO was decreased by quenching effect at OER=50％ and 100％.

• 한국축산시설환경학회지
• /
• 제12권1호
• /
• pp.7-12
• /
• 2006

본 연구에서는 육성 비육돈 슬러리를 이용하여 슬러리의 환경조건에 따라 슬러리로 부터의 암모니아 발생 특성을 분석코자 하였다. 슬러리의 온도와 pH를 조절하여 슬러리로부터 발생하는 암모니아 농도를 측정 분석한 결과 슬러리의 온도가 높을수록 슬러리로 부터 발생하는 암모니아 농도는 급격히 증가하는 것으로 나타났고, 슬러리의 pH를 5, 6, 7, 8의 4수준으로 조절하여 각각의 온도에 따라 발생하는 암모니아 농도를 측정한 결과 pH 5, 6에서는 암모니아 가스가 검출되지 않았으나 pH 7, 8에서는 많은 양의 암모니아 가스가 검출되었고 양돈 슬러리의 pH가 높을수록 발생하는 암모니아 가스가 많이 발생하는 것으로 분석되었다. 본 연구결과 슬러리의 온도를 낮추어 주거나 슬러리의 pH를 낮춤으로써 슬러리로부터 발생하는 악취가스를 크게 줄일 수 있을 것으로 판단되었다.

• 한국기후변화학회지
• /
• 제9권3호
• /
• pp.273-281
• /
• 2018

The purpose of this study is to consider the effectiveness of continuous $CO_2$ emission monitoring in waste incinerator. To prevent global warming, many countries are trying to reduce $CO_2$, the main greenhouse gas. Currently, Korea is implementing an emission trading scheme to reduce $CO_2$, and waste incinerators are included in this scheme as major $CO_2$ sources. However, when using waste incinerators, $CO_2$ is discharged during incineration of various types of wastes, therefore it is very difficult to calculate the amount of emissions according to IPCC guidelines. In addition, the estimation of $CO_2$ emissions by calculation is known to lack of accuracy comparing with actual emissions. Currently, Korea is operating CleanSYS, which enables continuous measurement of gases emitted into the atmosphere. Therefore, it is possible to estimate the $CO_2$ emissions of waste incineration facilities. The IPCC, which published $CO_2$ emission calculation guidelines, recognizes that direct measurement of emission is a more advanced method in cases of various $CO_2$ emission sources such as a waste incineration facility. Also, Korean emission trading scheme guidelines allow estimation of $CO_2$ emissions by continuous measurement at waste incineration facilities. Therefore, this study considers the effectiveness of a direct measurement method by comparing the results of CleanSYS with the calculation method suggested by the IPCC guidelines.

• 한국기후변화학회지
• /
• 제8권3호
• /
• pp.231-237
• /
• 2017

In this study, the $N_2O$ emission factor of the facility was developed by measuring the kiln type pyrolysis melting facility. This used PAS (Photoacoustic Spectroscopy) method and measured the $N_2O$ emission concentration. From March 2016 to April 2016, it was measured over a total of two times and $N_2O$ concentrations were measured continuously for 24 hours using a 24 hour continuous measuring instrument (LSE-4405). The measured $N_2O$ emission concentration of the pyrolysis melting facility was 0.263 ppm on average and the emission concentration distribution in the range of 0.013~0.733 ppm was obtained. Therefore, the $N_2O$ emission factor of the kiln-type pyrolysis melting facility was estimated to be $0.829gN_2O/ton$-Waste. As a result of comparing the $N_2O$ emission factor of the thermal kiln type pyrolysis melting facility and the previous study, previous studies were about 18 times higher. It is estimated that this is due to the difference of furnace temperature, oxygen concentration and denitrification facilities. It is considered that the study of the emission factor of pyrolysis melting facility is an important factor in improving the credibility of greenhouse gas inventory in waste incineration sector.

• 한국산학기술학회논문지
• /
• 제20권2호
• /
• pp.378-384
• /
• 2019

식품 폐수 처리 설비중 폐수처리장 폭기조 송풍 설비 개선을 통한 수질개선 효과 및 전기사용량 변화에 따른 온실가스 발생량을 평가 하였으며, 식품 폐수처리장에서 발생되는 슬러지를 탈수, 보관, 이송하는 설비의 효율적인 개선을 통한 전기사용량 개선전과 개선후 변화에 따른 온실가스 발생량도 함께 평가하였다. 폐수처리장 설비 개선에 따른 온실가스 배출량 평가는 폐수처리 공정으로 부터의 직접배출과 전력사용으로부터의 간접배출량으로 구분 된다. 폐수처리장 수질 개선 효과는 BOD 제거율이 63.3%, COD 제거율 42.0%, SS 제거율 71.0%, T-N제거율이 39.6%로 나타났으며, 폐수처리에 의한 온실가스 직접배출량(Scope 1)과 전력소비량 변화에 대한 온실가스 간접배출량(Scope 2)을 적용하여 온실가스 배출량을 산정한 결과 설비 개선전 3,668.8tCO2eq./yr 에서 설비 개선후 3,392.8tCO2eq./yr 으로 감소 하여 총 276.0tCO2eq./yr (8.0%)의 온실가스 감축 효과가 있는 것으로 평가 되었다. 이상의 결과는 배출원의 수질 개선 효과로 인한 것이 아니라 전기사용량 감소로 인해 온실가스 배출량이 감소하였기 때문이다.

• 한국대기환경학회지
• /
• 제33권4호
• /
• pp.361-369
• /
• 2017

In this study, the characteristics of the dust emission according to the presence or absence of operation of the gas stove were analyzed by particle size analysis and density estimation while the mackerel was cooked while the fan was placed on the gas stove used in the home. The experiment was carried out using 20 mackerel of normal size at home. Commercially available canola oil was used as edible oil. In order to understand the characteristics such as particle size distribution of fine dust, light scattering measurement method which can be measured at intervals of several seconds was used. Particles generated by combustion of gas stove, particles formed by heating cooking oil, and particles generated by heating mackerel fish meat are judged to be nano size particles smaller than $1{\mu}m$. Therefore, it is necessary to use precise measurement method rather than the measurement method using the filter which is currently being measured in the measurement of the particles discharged from the fuel combustion or food cooking in the future. Analyzing the particle size and density of the dust emitted from the cooking stove is expected to contribute technically to the reduction of dust emissions from the cooking process of gas and fuel facilities at home and commercial facilities.

• 유기물자원화
• /
• 제28권1호
• /
• pp.83-95
• /
• 2020

폐기물을 이용한 공공 자원회수시설, BIO-SRF를 이용한 민간 열원시설 열에너지를 효율적으로 활용함에 있어 투자 대비 회수 기간의 경제성 문제가 대두 되었고, 이로 인하여 기존에 통상적으로 설계 시공 운영 되었던 온도, 압력 조건 범위값을 넘어서 실현 가능한 최적의 온도, 압력 조건의 열원 설비가 필요하게 되었다. 본 연구에서는 국내에서 운영 중인 열원시설을 대상으로 온도와 압력 조건에 따른 모델링을 통하여 에너지 전력 생산량을 분석하였고, 도출된 에너지 전력 생산량을 통하여 온실가스 배출량 감축 특성을 연구하였다. 최종적으로 폐기물 및 바이오매스 연료를 이용한 열에너지 생산시설의 효율적인 에너지 활용을 위해서는 고온의 온도와 고압의 압력 생산시 효율적인 에너지 생산이 이루어지고 경제성 있는 투자와 회수로 이루어지리라 판단된다.

• 한국환경보건학회지
• /
• 제33권3호
• /
• pp.217-226
• /
• 2007

The purpose of this study is to estimate the emission factor of $non-CO_2$ global warming gases such as $N_2O$ and $CH_4$ by measuring concentrations from stacks of waste incinerators and cement production plants. Based on the established monitoring methods, $N_2O$ concentration measured from stacks in incinerator were between 0.62 and $40.60\;ppm_v$ (ave. $11.50\;ppm_v$). The concentration of $N_2O$ was dependent on the incinerator types. However, the concentrations of $CH_4$ gas were between 2.65 and $5.68\;ppm_v$ (ave. $4.22\;ppm_v$), and did not show the dependency on the incinerator types. In the cement production plant, the concentration ranges of $N_2O$ from the stack were from 6.90 to $10.80\;ppm_v$ (ave. $8.60\;ppm_v$), and $CH_4$ were between 1.80 and $2.20\;ppm_v$ (ave. $2.60\;ppm_v$). Using measured concentrations, the emission amounts of $N_2O$ and $CH_4$ from stacks per year were calculated. The results were is 4.2 ton $N_2O/yr$ in the incinerators, and 53.7 ton $N_2O/yr$ in the cement facilities. The big difference is from the flow rate of flue gas in the cement facilities compared to the incinerators. By the same reason, the $CH_4$ emission amounts in cement plant and incinerator was found to be 339 ton $CO_2/yr$ and 34.1 ton $CO_2/yr$, respectively. Finally, the emission factor of $N_2O$ in the incinerators were calculated using the measured concentration and the amount of incinerated wastes, and was $42.5\sim799.1\;g/ton$ in kiln and stoker type, $11.9\sim79.9\;g/ton$ in stoker type, 90.1 ton/g in rotary kiln type, 174.9 g/ton in fluidized bed type, and 63.8 g/ton in grate type, respectively. Also, the emission factors of $CH_4$ were found to 65.2-91.3 g/ton in kiln/stoker type, 73.9-122 g/ton in stoker type, 109.5 g/ton rotary kiln, and 26.1 g/ton in fluidized bed type. This result indicates that the emission factor in incinerators is strongly dependent on the incinerator types, and matched with result of IPCC (International Panel on Climate Change) guideline.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2011년도 전력전자학술대회
• /
• pp.504-505
• /
• 2011

Decreasing actual greenhouse gas will be difficult if it is not solved addressed in architectural fields. Zero emission building or zero energy building, maximize the efficiency of energy, which means the building can operate by their own renewable energy facility without any other supplying. To be a zero emission building, a building needs realization of high efficiency low energy consumption, construction of building its own energy production facilities and lastly a power grid connection. According to increasing of DC load about TV, LED lighting, computer, IT in building for living and business, it is expected the save of energy when the system of AC power distribution change into the system of DC power distribution. Renewable energy exists a big different rate produced by outside environment. When electrical power overproduce, it can supply for system. Otherwise, if electrical power produce less, it can receive supply from system. Send and receive power can lead to zero to annual standard. This paper shows the simulation about efficient control of power conversion which is related to DC power distribution of architecture and DC output of renewable energy by using L-type converter.