• 풍력에너지저널
• /
• 제15권2호
• /
• pp.5-9
• /
• 2024

This paper describes the insulation breakdown characteristics of 72.5 kV dry-air insulated switchgear under development for installation in a wind power generator when a lightning impulse voltage is applied. For this study, the weak point of insulation due to the electric field concentration of the switchgear's internal shape was identified by finite element method (FEM) analysis, and the shape was actually simulated to measure and analyze the polarity of the lightning impulse voltage and the insulation breakdown characteristics according to the gas pressure at dry-air pressures of 0.1 Mpa to 0.45 Mpa. This study derives the maximum electric field with a 50 % discharge probability for each switchgear internal insulation vulnerable point based on the actual test and electrical simulation, which will be useful as reference data for supplementing and changing insulation design in the future.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권6호
• /
• pp.255-261
• /
• 2005

Recently, the RF inductive discharge or inductively coupled plasma continues to attract growing attention as an effective plasma source in many industrial applications, the best known of which are plasma processing and lighting technology. To the point of lighting sources, the ring-shaped electrodeless fluorescent lamps utilizing an inductively coupled plasma have been objects of interest and research during the last decades, mainly because of their potential for extremely long life, high lamp efficacies, rapid power switching response. In this paper, maxwell 3D finite element analysis program (Ansoft) was used to obtain electromagnetic properties associated with the coil and nearby structures. The electromagnetic emitting properties were presented by 3D simulation software operated at 250 kHz and some specific conditions. The electromagnetic field in the ferrite core was shown to be high and symmetric. An LS-100 luminance meter and a Darsa-2000 spectrum analyzer were used in the experiment. According to data on the lamp tested using high magnetic field ferrite, the optical and thermal wave fields were shown to be high around the ring-shaped electrodeless fluorescent lamp. The optical or light field was high at the center of the bulb rather than around the ferrite core. The light conditions of the bulb were assumed to be complex, depending on the condition of the filler gas, the volume of the bulb, and the frequency of the inverter. Our results have shown coupling between the gas plasma and the field of the light emitted to be nonlinear.

• 한국가스학회지
• /
• 제24권2호
• /
• pp.29-35
• /
• 2020

화학사고의 예방 및 대응을 위한 화학물질관리법이 2015년 전부 개정되었다. 이를 계기로 유해화학물질 취급시설의 설치 및 관리기준도 상당히 강화되었다. 하지만, 일부 기존시설의 경우 시설기준 준수가 어려운 쉽지 않은 경우가 발생하지만 일괄적으로 적용되고 있어 산업계에서는 어려움을 호소하고 있는 실정이다. 본 연구에서는 이러한 최근 2년(2017-2018)간 취급시설 중 민원(1,087건)이 가장 많았던(2017:117건, 2018:83건) 방류벽에 대한 선행연구, Flacs 시뮬레이션, 국내·외 기준, 만족도 조사 등을 통해 보다 합리적인 방안을 마련하고자 하였다. 이에 현재 가동 중인 기존시설에 한하여 방류벽의 설치 목적을 고려하여 화학물질 유·누출을 신속하게 감지할 수 있고 신뢰성을 높이기 위해 감지기를 추가로 설치하거나 상시 모니터링이 가능한 폐쇄회로텔레비전(CCTV)을 추가로 설치·운영하는 경우 추가 대체방안으로 인정하였다. 이는 부지를 확보하기 힘들거나, 공사비용 등 경제적인 문제로 법적인 규제를 이행하지 못하는 영세사업장 또는 중소기업의 안전측면과 비용적인 측면에 도움이 될 것이다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.221-221
• /
• 2014

The present work proposes an improved numerical simulator for design and modification of large area capacitively coupled plasma (CCP) processing chamber. CCP, as notoriously well-known, demands the tremendously huge computational cost for carrying out transient analyses in realistic multi-dimensional models, because electron dissociations take place in a much smaller time scale (${\Delta}t{\approx}10-8{\sim}10-10$) than time scale of those happened between neutrals (${\Delta}t{\approx}10-1{\sim}10-3$), due to the rf drive frequencies of external electric field. And also, for spatial discretization of electron flux (Je), exponential scheme such as Scharfetter-Gummel method needs to be used in order to alleviate the numerical stiffness and resolve exponential change of spatial distribution of electron temperature (Te) and electron number density (Ne) in the vicinity of electrodes. Due to such computational intractability, it is prohibited to simulate CCP deposition in a three-dimension within acceptable calculation runtimes (<24 h). Under the situation where process conditions require thickness non-uniformity below 5%, however, detailed flow features of reactive gases induced from three-dimensional geometric effects such as gas distribution through the perforated plates (showerhead) should be considered. Without considering plasma chemistry, we therefore simulated flow, temperature and species fields in three-dimensional geometry first, and then, based on that data, boundary conditions of two-dimensional plasma discharge model are set. In the particular case of SiH4-NH3-N2-He CCP discharge to produce deposition of SiNxHy thin film, a cylindrical showerhead electrode reactor was studied by numerical modeling of mass, momentum and energy transports for charged particles in an axi-symmetric geometry. By solving transport equations of electron and radicals simultaneously, we observed that the way how source gases are consumed in the non-isothermal flow field and such consequences on active species production were outlined as playing the leading parts in the processes. As an example of application of the model for the prediction of the deposited thickness uniformity in a 300 mm wafer plasma processing chamber, the results were compared with the experimentally measured deposition profiles along the radius of the wafer varying inter-electrode gap. The simulation results were in good agreement with experimental data.

• 조명전기설비학회논문지
• /
• 제19권4호
• /
• pp.1-8
• /
• 2005

본 연구에서는 2차원적 유체 모델을 통하여 보다 실질적인 플라즈마를 이해하고자 하였으며, 기하학적인 방전전극 구조를 반영하도록 전극단에서 챔버 외벽의 거리를 변화시키면서 플라즈마의 특성을 정량적으로 비교 분석하고자 하였다. 방전 챔버의 구조로서, 전극의 반경과 방전 챔버의 높이는 일정하게 유지하면서 방전 챔버의 넓이를 변화시킴에 따라 형성되는 플라즈마의 특성을 분석하였다. 그 결과, 전극단과 챔버 외벽의 거리가 짧을수록 그 영역에서 전계가 강하게 형성되어, 외벽을 향하는 각 입자들의 움직임도 매우 활발하다는 것을 알 수 있었다. 또한, 전각단과 외벽과의 거리가 짧을수록 전극 면상에서 형성되는 입자들의 수밀도와 유속의 변화가 일정하게 형성되는 것을 알 수 있었다. 이러한 결과는 웨이퍼의 대구경화에 따른 플라즈마의 균일성을 고려할 경우에 매우 효과적일 것으로 고려되어 진다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권5호
• /
• pp.675-681
• /
• 2011

본 논문에서는 선박평형수 처리시스템의 핵심부품인 중압 자외선 램프와 자기식 안정기의 설계 및 제작에 대하여 기술하였다. 자외선 램프의 최적 방전조건을 확보하기 위하여 봉입되는 아르곤 가스와 수은량 변화에 따른 전기 광학적 특성변화를 분석하였다. 시제작 램프의 전압은 490 [V], 전류는 8.6 [A], 전력은 4.0 [kW]이며, 자외선 세기는 현재 사용되고 동등한 제품과 비교해 15 [%] 이상 향상되었다. 자기식 안정기는 이론적 해석과 시뮬레이션을 통해 UI 코어를 사용한 단상 내철형으로 설계하였으며, 무부하 전압은 920 [V]이고 정격출력은 8.5 [kVA]이다. 시제작 자외선 램프 및 안정기를 적용한 350 [$m^3/h$]급 선박평형수 처리시스템에서 해수에 포함된 플랑크톤 사멸률을 평가한 결과 99.99 [%] 이상으로 IMO에서 정한 규정을 만족하였다.

• Korean Chemical Engineering Research
• /
• 제54권3호
• /
• pp.350-359
• /
• 2016

본 연구는 vessel blowdown 시 발생하는 온도와 압력 변화를 보다 정확히 예측하기 위하여 기존에 개발된 dynamic model을 기반으로 새로운 모델을 개발하고, 개발한 모델의 정확도를 높이기 위하여 vessel 내부의 흐름이 층류일 때와 난류일 때를 모두 고려하여 vessel 벽면으로부터 기체로의 열 전달량을 계산하였다. 효율적인 열역학 계산을 위해 일체의 계산식은 압력이 감소하는 단계 별로 나누어 진행하였으며 계산의 부담을 덜어주면서 계산의 정확도를 유지하기 위한 압력변화 size를 결정하였다. 개발한 모델에 Peng-Robinson equation과 Soave-Redlich-Kwong equation을 적용하여 각각의 경우에 따른 결과의 차이를 비교하였다. 마지막으로 모델의 검증을 위해 Haque et al.의 실험조건을 동일하게 적용하여 실험 결과와 시뮬레이션 결과를 비교 하였으며, 이를 통해 모델의 정확도를 입증하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.787-790
• /
• 2003

A rf triode magnetron sputtering system is designed and installed its construction in vacuum chamber. In order to calibrate the rf triode magnetron sputtering for thin films deposition processes, the effects of different glow discharge conditions were investigated in terms of the deposition rate measurements. The basic parameters for calibrating experiment in this sputtering system are rf power input, gas pressure, plasma current, and target-to-substrate distance. Because a knowledge of the deposition rate is necessary to control film thickness and to evaluate optimal conditions which are an important consideration in preparing better thin films, the deposition rates of copper as a testing material under the various sputtering conditions are investigated. Furthermore, a triode sputtering system designed in our team is simulated by the SIMION program. As a result, it is sure that the simulation of electron trajectories in the sputtering system is confined directly above the target surface by the force of $E{\times}B$ field. Finally, some teats with the above 4 different sputtering conditions demonstrate that the deposition rate of rf triode magnetron sputtering is relatively higher than that of the conventional sputtering system. This means that the higher deposition rate is probably caused by a high ion density in the triode and magnetron system. The erosion area of target surface bombarded by Ar ion is sputtered widely on the whole target except on both magnet sides. Therefore, the designed rf triode magnetron sputtering is a powerful deposition system.

• 한국추진공학회지
• /
• 제19권2호
• /
• pp.55-64
• /
• 2015

본 연구에서는 75톤급 추진기관 시험설비 화염유도로 설계안에 대한 열적 안전성 및 연소가스의 안전한 배출을 평가하기 위하여 3차원 화염냉각해석을 수행하였다. 화염과 냉각수 간의 열전달 및 상변화 과정을 모사하기 위하여 Mixture 다상모델을 적용하였으며, 단일 화학종 비반응 플룸모델을 이용한 화염냉각해석을 수행하였다. 본 해석결과를 통하여 냉각수 유량에 따른 화염유도로 벽면에서의 최고 온도값을 예측하였으며, 또한 콘크리트 내화온도에 해당하는 최소 냉각수 유량을 도출하였다.

• Journal of Electrical Engineering and Technology
• /
• 제9권5호
• /
• pp.1511-1519
• /
• 2014

The objective of this paper is to propose a modelling of a small compressed air energy storage system, which drives an induction generator based on a field-oriented control (FOC) principle for a renewable power generation. The proposed system is a hybrid technology of energy storage and electrification, which is developed to use as a small scale of renewable energy power plant. The energy will be transferred from the renewable energy resource to the compressed air energy by reciprocating air compressor to be stored in a pressurized vessel. The energy storage system uses a small compressed air energy storage system, developed as a small unit and installed above ground to avoid site limitation as same as the conventional CAES does. Therefore, it is suitable to be placed at any location. The system is operated in low pressure not more than 15 bar, so, it easy to available component in country and inexpensive. The power generation uses a variable speed induction generator (IG). The relationship of pressure and air flow of the compressed air, which varies continuously during the discharge of compressed air to drive the generator, is considered as a control command. As a result, the generator generates power in wide speed range. Unlike the conventional CAES that used gas turbine, this system does not have any combustion units. Thus, the system does not burn fuel and exhaust pollution. This paper expresses the modelling, thermodynamic analysis simulation and experiment to obtain the characteristic and performance of a new concept of a small compressed air energy storage power plant, which can be helpful in system designing of renewable energy electrification. The system was tested under a range of expansion pressure ratios in order to determine its characteristics and performance. The efficiency of expansion air of 49.34% is calculated, while the efficiency of generator of 60.85% is examined. The overall efficiency of system of approximately 30% is also investigated.