• Advances in Computational Design
• /
• 제8권4호
• /
• pp.309-325
• /
• 2023

An innovative inertial reactive armor is being developed through a multi-discipline project. Unlike the well-known explosive or non-explosive reactive armour that uses high-energy explosives or bulging effect, the proposed inertial reactive armour uses active disc elements that is set to rotate rapidly upon impact to effectively deflect and disrupt shaped charges and kinetic energy penetrators. The effectiveness of the proposed armour highly depends on the tangential velocity of the impact point on the rotating disc. However,for a single layer armour with an array of high-speed rotating discs, the tangential velocity is relatively low near the center of the disc and is not available between the gap of the discs. Therefore, it is necessary to configure the armor with double layers to increase the tangential velocity at the point of impact. This paper explores a multi-objective geometry design optimization for the double-layered armor using Nelder-Mead optimization algorithm and integration tools of the python programming language. The optimization objectives include maximizing both average tangential velocity and high tangential velocity areas and minimizing low tangential velocity area. The design parameters include the relative position (translation and rotation) of the disc element between two armor layers. The optimized design results in a significant increase of the average tangential velocity (38%), increase of the high tangential velocity area (71.3%), and decrease of the low tangential velocity area (86.2%) as comparing to the single layer armor.

• Nuclear Engineering and Technology
• /
• 제26권2호
• /
• pp.212-224
• /
• 1994

원형도관내의 비점성유동장에 놓인 동심인 유연성 실린더의 안정성을 분석하기 위하여 수치해석적방법이 개발되었다. 진동하는 실린더에 작용하는 비정상·비점성 유체유발력을 스펙트럼 배치방법을 사용하여 지배방정식을 단순화시키지 않음으로서 더 정밀하게 예측하였다. 본 수치해석이론은 기존의 퍼텐샬이론과 비해 비교적 넓은 환의 경우와 짧은 실린더의 경우에도 적용할 수 있다. 비점성유동의 지배방정식은 라플라스방정식으로부터 구하였다. 유체유동과 결부된 실린더의 유동방정식은 갤러킨의 방법에 의하여 불연속방정식으로 표시되며 이로부터 계의 운동특성을 검토하였다. 계가 좌굴현상에 의하여 안정성을 잃는 임계유속에 대한 환의 간격과 실린더의 길이의 영향이 검토되었다. 수치해석방법을 입증하기 위하여 얇은 막 근사이론에 근거를 두고 호프슨이 제안한 퍼텐샬이론을 개선하였다. 계의 안정성과 동적특성을 수치해석방법에 의하여 예시하였고 기존의 이론과 본 연구에서 제안된 근사법으로 구한 결과와 비교하여 잘 일치함을 보였다. 무차원화된 임계유속은 환의 간격이 넓을수록 실린더의 길이 가 짧을수록 증가함을 보였다.

• Journal of Mechanical Science and Technology
• /
• 제20권5호
• /
• pp.710-716
• /
• 2006

Micro-PIV system with a high speed CCD camera is used to measure the flow field near the advancing meniscus of a water slug in microchannels. Image shifting technique combined with meniscus detecting technique is proposed to measure the relative velocity of the liquid near the meniscus in a moving reference frame. The proposed method is applied to an advancing front of a slug in microchannels with rectangular cross section. In the case of hydrophilic channel, strong flow from the center to the side wall along the meniscus occurs, while in the case of the hydrophobic channel, the fluid flows in the opposite direction. Further, the velocity near the side wall is higher than the center region velocity, exhibiting the characteristics of a strong shear-driven flow. This phenomenon is explained to be due to the existence of small gaps between the slug and the channel wall at each capillary corner so that the gas flows through the gaps inducing high shear on the slug surface. Simulation of the shape of a static droplet inside a cubic cell obtained by using the Surface Evolver program is supportive of the existence of the gap at the rectangular capillary corners. The flow fields in the circular capillary, in which no such gap exists, are also measured. The results show that a similar flow pattern to that of the hydrophilic rectangular capillary (i.e., center-to-wall flow) is always exhibited regardless of the wettability of the channel wall, which is also indicative of the validity of the above-mentioned assertion.

• 한국콘텐츠학회논문지
• /
• 제9권12호
• /
• pp.656-664
• /
• 2009

본 논문은 산업화와 교통 환경의 발달로 인해 최근 들어 발생빈도가 크게 증가되고 있는 외상성 뇌손상을 대상으로 하여, 치료적 운동의 적용에 있어 수중운동의 뇌신경 가소성에 미치는 영향과 전정-운동에 대한 영향에 대해 알아보고자 한 연구이다. 수중운동이라는 운동학적 특성을 통해 기능적 독립을 위해선 반드시 전제되어야 하는 뇌신경 가소성과 전정-운동 기능의 회복에 어떠한 영향을 주는지를 알아보기 위하여 80마리의 백서를 대상으로 4군으로 나누고, 3주간 서로 다른 방식의 운동 훈련(실험군 I: 대조군, II: 수중운동군, III: 속도 및 경사 조절 트레드밀 운동군, IV: 단순 트레드밀 운동군)을 적용하여 전정-운동 기능에 미치는 영향을 Rota-Rod 검사를 통해 알아보고, 신경가소성에 대한 영향성에 대해서는 대뇌피질에서의 GAP-43 인자를 조직면역화학적 방법으로 검사해 보았다. 연구결과, 수중운동을 적용한 군에서, 다른 군들에 비해 뇌신경 가소성에 긍정적이고도 유의한 영향을 미칠 수 있음을 확인할 수 있었으며, 전정-운동 기능 향상에 있어서도 다른 군들에 비해 유의한 향상 효과를 나타내었다. 이는 물이 가지고 있는 다양한 감각적 특성과 환경적 상황이 뇌손상으로 인해 불안정한 신체의 운동에 긍정적인 영향을 미치기 때문인 것으로 사료된다.

• 대한기계학회논문집B
• /
• 제20권7호
• /
• pp.2337-2346
• /
• 1996

One of the most useful method for increasing combustion loading of premixed flame is to strengthen the turbulent intensity of unburned mixture. It produces an important information to a design of efficient combustion equipment that analysing microstructure of strong turbulence premixed flame. The flame structure and characteristics are depend on the turbulence of unburned mixture. Therefore, to strengthen the turbulent intensity of unburned mixture make flame scale small and accomplish efficient combustion. We measured the velocity of local flame front movements, local eddy radius and local reaction zone thickness quantitatively with increasing turbulent intensity of unburned mixture. We researched the microstructure of flame using ion currents that react sensitively in the reaction zone. Consequently, the velocity of local flame front movements is depend on the velocity of unburned mixture and local eddy scale is to be small with increasing turbulent intensity. But there is no change in local reaction zone thickness with turbulence.

• 환경영향평가
• /
• 제22권1호
• /
• pp.99-107
• /
• 2013

This study is an impact assessment of building blocks on urban inundation depth and area. LiDAR data is used to generate two original data set in terms of DEM with $5{\times}5$ meter and building block elevation layer of the study drainage area in Cheongju and then the building block elevation layer is modified again to the mesh data with same size to DEM. Two-dimensional inundation analysis is carried out by applying 2D SWMM model. The inundation depth calculated by using the building block elevation layer shows higher reliability than the DEM. This is resulted from the building block interference to surface flow. In addition, the maximum flooded area by DEM is two times wider than the area by building block layer. In the case of the surface velocity, the difference of velocity is negligible in either DEM or building block case in the low building impact zone. However, If the impact of building on the surface velocity was increase, the gap of velocity was significant.

• Structural Engineering and Mechanics
• /
• 제90권4호
• /
• pp.357-370
• /
• 2024

Due to the fact that the mechanism of the effects of temperature and initial geometric imperfection on low-velocity impact problem of axially moving plates is not yet clear, the present paper is to fill the gap. In the present paper, the nonlinear dynamic behavior of axially moving imperfect graphene platelet reinforced metal foams (GPLRMF) plates subjected to lowvelocity impact in thermal environment is analyzed. The equivalent physical parameters of GPLRMF plates are estimated based on the Halpin-Tsai equation and the mixing rule. Combining Kirchhoff plate theory and the modified nonlinear Hertz contact theory, the nonlinear governing equations of GPLRMF plates are derived. Under the condition of simply supported boundary, the nonlinear control equation is discretized with the help of Gallekin method. The correctness of the proposed model is verified by comparison with the existing results. Finally, the time history curves of contact force and transverse center displacement are obtained by using the fourth order Runge-Kutta method. Through detailed parameter research, the effects of graphene platelet (GPL) distribution mode, foam distribution mode, GPL weight fraction, foam coefficient, axial moving speed, prestressing force, temperature changes, damping coefficient, initial geometric defect, radius and initial velocity of the impactor on the nonlinear impact problem are explored. The results indicate that temperature changes and initial geometric imperfections have significant impacts.

• Tribology and Lubricants
• /
• 제21권5호
• /
• pp.201-208
• /
• 2005

This paper presents the FEM analysis on the contact behavior characteristics of mechanical face seals in a small hydro-power turbine. Especially, the axial displacement and contact normal stress between a seal ring and a seal seat of a primary sealing unit have been analyzed as functions of rotating speed of a hydro-turbine, sealing gap, water and cooling fluid temperature. Those are strongly related to a leakage of water and wear between a seal ring and a seal seat. The FEM computed results present that the rotating speed of a hydro-turbine may be kept less than 800 rpm, and the sealing gap in a primary sealing unit is restricted $0.5\~5$. The coolant temperature in which is most influential parameter to the contact behaviors of a sealing unit may be kept less than $15^{\circ}C$ for a safe operation of a sealing unit without a leakage and wear.

• Journal of Mechanical Science and Technology
• /
• 제15권7호
• /
• pp.941-950
• /
• 2001

A study of counter-current two-phase flow in narrow rectangular channels has been performed. Two-phase flow regimes were experimentally investigated in a 760mm long and 100mm wide test section with 2.0 and 5.0mm gap widths. The resulting flow regime maps were compared with the existing transition criteria. The experimental data and the transition criteria of the models showed relatively good agreement. However, the discrepancies between the experimental data and the model predictions of the flow regime transition become pronounced as the gap width increased. As the gap width increased the transition gas superficial velocities increased. The critical void fraction for the bubbly-to-slug transition was observed to be about 0.25. The two-phase distribution parameter for the slug flow was larger for the narrower channel. The uncertainties in the distribution parameter could lead to a disagreement in slug-to-churn transition between the experimental findings and the transition criteria. For the transition from churn to annular flow the effect of liquid superficial velocity was found to be insignificant.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.819-824
• /
• 2000

The flow inside an axial turbomachinery must be unsteady. Rotor-stator interaction by two blade rows influences performance, the generation of noise and vibration. So, it will be necessary to study the rotor-stator interaction for the design of an axial fan in which the axial gap between two blade rows is small. In this study, rotor-stator interaction is investigated by experimental methods. The research fan has one stage which consists of 24 rotor blades and 22 stator blades. Three-dimensional velocities measured using $45^{\circ}$ slanted hot wire probe and total pressure is measured using Kiel total pressure probe between rotor and stator with the axial 25%, 55%, 145% of chord length,. This study describes the influence of rotor-stator gap on the flow pattern, performance and loss. The efficiency curve show that the change of the rotor-stator gap make difference in the efficiency. And, the 3-dimensional velocity distribution show that the potential interaction between the rotor and the stator have a great effect on the flow field downstream of rotor, where there are wake flow. various vortices in hub region and leakage vortex in casing region etc.