• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.136-139
• /
• 2002

Previous valves have initial gap problem, high voltage or high pressure problem. In this paper, various micro valves with free floating structure have been fabricated and tested to solve the initial gap and high pressure problems. The paper presents how to etch Parylene-C which is a valve cap material without A1 mask layer. The maximum flow-rate of fabricated micro valve is$118{\mu\ell}$/min with $370{\mu}m$ orifice size and the leakage at the initial and reverse pressure is not observed.

• Journal of Welding and Joining
• /
• v.22 no.6
• /
• pp.19-24
• /
• 2004

The laser welding and its analysis of thin-sheet carbon steels were carried out with high power $CO_{2}$ laser. The main factor of weld quality of laser welding is gap and edge quality. This work was preformed to focus on the gap tolerance problem during laser welding. First, bead on plate welding of thin sheet was examined to investigate the effect of laser welding variables, and to obtain optimum welding condition. Butt welding was also carried out to show the effect of gap on the laser weldability of thin sheet. In order to investigate the effect of gap on formability of welded thin sheet, LDH test was caried out. At high welding speed, the partial penetration was obtained by low heat input. Otherwise, porosity was formed in the bead at low weld speed because of too much heat input. The optimum welding condition of welding was derived from bead width, penetration and hardness property. The maximum gap tolerance on laser welding was observed to be about 0.2mm. This gap size has good relationship with beam size of laser spot(about 0.3mm). The formability of welded sheet was about $80{\%}$ value of base metal and the gap size has not affected on the formability, although weld quality is dependent on the gap size.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.667-672
• /
• 2009

In case of high-levelled platform in the urban railway system, a certain width of gap is inevitably formed between the train and the platform, and the gap gets wider when it is concerned with curved portion of the tracks at platform. This gap greatly contributes to decrease of passengers' safety while boarding and alighting a train. In particular, it endangers children's safety. Gap filler system is often fitted out to minimize gap and to overcome this safety problem at platform. However, as existing gap fillers are in most case structurally complex and organized to be powered from separate supply unit, there are a range of non-favorable points from the viewpoint of cost, installation and maintenance. In addition, existing gap fillers are due to cause disruptions in operation of train, with failures such as malfunctioning of control system. In this study, the authors will review on the gap filler applicable to the platforms of various height types, which neither requires any modifications of the train nor causes any operational disruptions. The proposed gap filler system here is a by-stage retractile type and based on the idea of interlocking it with train doors open-close mechanism, without any additional power supply unit or control system.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1998.10a
• /
• pp.539-544
• /
• 1998

Generally, welding gap is a serious factor of a falling-off in weld quality among various kind of weld defect. Welding gap is created between two work piece in GMAW(Gas Metal Arc Welding) of horizontal fillet weld because surface of workpiece is not flat by cutting process. In these days, there were many attempts to detect welding gap. though we prevalently use the vision sensor or arc sensor in welding process, it is difficult to detect welding gap for improvement of welding quality. But we have a trouble to find relationship between welding gap and many welding parameters due to non-linearity of welding process. As mentioned about the various difficult problem, we can detect welding gap precisely using neural networks which are able to model non-linear function. Also, this paper was proposed real-time monitoring of weld bead shape to find effect of welding gap and to estimate weld quality. Monitoring of weld bead shape examined the correlation of welding parameters with bead eometry using learning ability of neural networks. Finally, the developed system, welding gap detecting system and bead shape monitoring system, is expected to the successful capability of automation of welding process by result of simulation.

• Korean Journal of Computational Design and Engineering
• /
• v.16 no.5
• /
• pp.380-389
• /
• 2011

Esthetic appeal of a product is often affected by the appearance quality of seams forming between components of the product. The appearance quality of seams is, however, assessed in a very subjective and qualitative manner that heavily depends on the evaluator. This paper presents a preliminary study to quantify such assessment by formulating a quantitative index which is a linear function of the seam gap sizes, seam gap ranges, and the size uniformity of seam gaps. By considering a highly simplified problem of a drawer system and utilizing subjective assessments by twenty evaluators, the index has been formulated. The validity of this index has been confirmed by observing its behavior with changes of the component tolerances. Also, the utility of this index has been demonstrated through a selective assembly scheme applied to the drawer system problem. Though the index formulated in this study for seam appearance quality may be useful, future studies are necessary to make the model readily applicable to real problems.

• Journal of KIISE:Information Networking
• /
• v.30 no.6
• /
• pp.720-728
• /
• 2003

Blind signature is such a signature scheme that conceals the contents of signature itself and who is the user of the signature make user's anonymity possible. For this reason, they are used in security services such as electronic cashes and electronic votes in which the behavior of actor should not be exposed. In this paper we propose an ID-based blind signature scheme from Gap Diffie-Hellman group. Its security is based on the hardness of Computational Diffie-Hellman Problem. Proposed scheme efficiently improve against existing blind signature scheme by using two-pass protocol between two users and by reducing computation process. Therefore it can be used efficiently in wireless PKI environment.

• Journal of the Korean association of regional geographers
• /
• v.16 no.5
• /
• pp.537-548
• /
• 2010

As the rapid development of economy in China, the problem in income gaps become a tough and sensitive social problem. Under this social background, this research try to find the main reasons of the income gap among the East China, West China, and the central China, basing on the analysis of its actuality and forming, and then put forward some solution plans. The research shows that in different development levels of China influencing factor of urban-rural income gap is also different. Take East China for example, the education support plays an important part of narrowing income gap. The influence of education support on urban-rural income gaps more significant than industrialization, what is more, its influence has the more reinforce trend, while in the less developed central and western part in China, what can narrowing income gap significantly is industrialization and the support for agriculture. Therefore, in order to solve the problem of income gap between urban and rural areas in China radically, it is not enough to perform medical insurance reform and social insurance reform in the whole county. Besides this, we should perform other kinds of reformation countermeasures which have their regional characteristics. For example, in eastern, the regional governments should reinforce the education system; in central china, they should focus on developing industry; in western, the regional governments should increase the expense to support the agricultural development, and so on. With these countermeasures, they could not only relieve the gap between urban and rural areas in China, but also ensure to develop economy substantially and stably in the whole country.

• Bulletin of the Korean Mathematical Society
• /
• v.52 no.6
• /
• pp.1777-1795
• /
• 2015

In this paper, we establish sufficient conditions for the solution set of parametric generalized vector mixed quasivariational inequality problem to have the semicontinuities such as the inner-openness, lower semicontinuity and Hausdorff lower semicontinuity. Moreover, a key assumption is introduced by virtue of a parametric gap function by using a nonlinear scalarization function. Then, by using the key assumption, we establish condition ($H_h$(${\gamma}_0$, ${\lambda}_0$, ${\mu}_0$)) is a sufficient and necessary condition for the Hausdorff lower semicontinuity, continuity and Hausdorff continuity of the solution set for this problem in Hausdorff topological vector spaces with the objective space being infinite dimensional. The results presented in this paper are different and extend from some main results in the literature.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.5
• /
• pp.827-832
• /
• 2008

One of the most important issues in AC PDP is luminance and luminous efficacy. To improve the luminance and luminous efficacy, new sustain electrode structure which contains long discharge gap is necessary. However, it causes a rise of firing voltage. In this experiment, a new structure is proposed in order to solve this problem. To drop the firing voltage, the hump shaped electrode is inserted into the forward area of the main discharge gap. The experimental results show that proposed structures with 160um discharge gap have high firing voltage by 38V, high luminance by 30% and high luminous efficacy by 15% compared with conventional type having 60um discharge gap. In addition, the proposed structure with hump electrode shows lower firing voltage by 24V compared with the test panel with 160um discharge gap which doesn't have hump electrode though they have similar luminous efficacy.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.46
• /
• pp.61-104
• /
• 2010

The purpose of this work aims to analyse the principles of good faith under international transaction with CLOUT and UNILEX cases. Article 7(1) CISG sets the stage for the interpretation by promoting a uniform approach using good faith and the international charter of the convention. In other words, article 7(1) defines the purpose and the principle of interpretation and is applied to the Convention as a whole. As such, it also includes article 7(2), which goes beyond the big picture and settles the problems of gap filling. It is also important to understanding that the mandate of the CISG is to look for a solution, which is not only restricted to interpretation but extends to solving a problem. The problem in this work is to find out how gap filling is achieved and, because of the autonomous mandate of interpretation, to explain and understand its relationship with domestic law. The solution to the interpretation of article 7(2) must be found within the four corners of the CISG. To restate, article 7(2) describes two situations where gap filling is needed. First, if the matter is governed by the Convention but not expressly settled, then a gap must be filled in conformity with general principles on which it is based. Second, if the matter is not covered then the gap must be filled taking domestic law into consideration. There are two reasons why a matter may not be covered by the Convention. First and most obviously, it has been specifically exclude from the sphere of Application by the CISG itself, such as validity in article 4. Second, changes in business methods will lead to gaps. The United Nations has established a service known as CLOUT. This contains abstracts of hundreds of selected decisions of both courts and arbitration tribunals. And UNILEX is cosponsored by the Italian Centre for Comparative and Foreign Law Studies and UNIDROIT Contract Principles. The cases are in abstract format, but, when available, the full text of the case in the original language is also supplied.