• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.113-118
• /
• 2011

Many kinds of dynamic absorbers have been used to reduce the vibration of machineries and structures. In the typical ones, however low damping capacity, durability and limited install condition restrict their application. In this study, high damped dynamic absorber was proposed for diesel generator set. Developed absorber is composed with mass and coil springs. Silicone oil was filled inside the narrow gap between mass and casing. Viscous damping of silicon oil act as additional damping so that proposed dynamic absorber is suitable for D/G set which have adjacent resonance frequency to operation speed. The performance of the dynamic absorber was confirmed through the actual test on diesel engine generator set.

• 전기학회논문지P
• /
• 제55권1호
• /
• pp.13-20
• /
• 2006

In this paper, a control method of ozone generator for a tiny deodorizer is proposed, and also a cooling technique is described which is cooling down the flowing air gap into a silent discharger to $2[^{\circ}C]$ to generate ozone of high density and diffusing power. As the digital control system for this method, a double feedback loop is designed which detects the voltage and current of equivalent capacitor of the discharger and compensates for the poor power waveform caused by the noise at high discharging frequency. During the plant modeling of this system, computing time factor is considered as a unique parameter of the power system to improve the respond characteristics with regard to fluctuating load and to replenish the computing time delay of the controller. Through the experiment, sinusoidal input current for discharger can be acquired and all the effectiveness of this accurate control system over unstable ozone discharger are proved.

• Journal of information and communication convergence engineering
• /
• 제10권1호
• /
• pp.85-90
• /
• 2012

A 40-MS/sec 10-bit pipelined analog to digital converter (ADC) with a 1.2 Vpp differential input signal is proposed. The implemented pipelined ADC consists of eight stages of 1.5 bit/stage, one stage of 2 bit/stage, a digital error correction block, band-gap reference circuit & reference driver, and clock generator. The 1.5 bit/stage consists of a sub-ADC, digital to analog (DAC), and gain stage, and the 2.0 bit/stage consists of only a 2-bit sub-ADC. A bootstrapped switch with a constant resistance is proposed to improve the linearity of the input switch. It reduces the maximum VGS variation of the conventional bootstrapped switch by 67%. The proposed bootstrapped switch is used in the first 1.5 bit/stage instead of a sample-hold amplifier (SHA). This results in the reduction of the hardware and power consumption. It also increases the input bandwidth and dynamic performance. A reference voltage for the ADC is driven by using an on-chip reference driver without an external reference. A digital error correction with a redundancy is also used to compensate for analog noise such as an input offset voltage of a comparator and a gain error of a gain stage. The proposed pipelined ADC is implemented by using a 0.18-${\mu}m$ 1- poly 5-metal CMOS process with a 1.8 V supply. The total area including a power decoupling capacitor and the power consumption are 0.95 $mm^2$ and 51.5 mW, respectively. The signal-to-noise and distortion ratio (SNDR) is 56.15 dB at the Nyquist frequency, resulting in an effective number of bits (ENOB) of 9.03 bits.

• 대한환경공학회지
• /
• 제28권1호
• /
• pp.97-103
• /
• 2006

본 논문은 미세 오존 출력을 얻을 수 있는 자동제어형 오존발생장치의 제어기법을 제시하고, 또한 무성방전에 의한 오존발생장치의 유입공기를 공극에서 저온인 $2^{\circ}C$까지 냉각 하여 포화 확산도가 높은 고밀도 탈취용 오존을 발생시킬 수 있는 기법을 제시한다. 고주파수의 오존방전 노이즈에 의한 전원파형의 불량화를 보상하기 위해서 디지털 궤환 제어시스템을 구성하고, 방전관의 등가 커패시터의 전압과 전류를 검출하여 2중의 제어루프를 설계한다. 부하변동에 따르는 과도상태 응답특성을 개선하고 제어기의 연산 지연시간을 보상하기 위하여 연산시간을 전원장치 플랜트의 고유한 파라미터로 가정하여 플랜트모델에 포함시켜 모델링한다. 제안된 오존 발생기는 고농도 고효율의 오존방전 시스템의 입력전원에서 고주파방전노이즈가 제거되어 정현적으로 되며 2배 이상의 안정된 오존출력을 얻는 것을 실험적으로 입증한다.