• 동력기계공학회지
• /
• 제1권1호
• /
• pp.144-153
• /
• 1997

The magnetic levitation system is utilized in the magnetic bearing of high-speed rotor because of little friction, no lubrication, no noise and so on. The magnetic levitation system need the feedback controller for the stabilization of system, and gap sensors are generally used to measure the gap. The use of gap sensors brings out the increase of the number of troublesome, and the decrease of the control performance because of the dislocation between the measurement point and the control point. This paper presents the design of the gap estimation circuit for the sensorless method proposed by authors in the magnetic levitation system. We made the gap estimation circuit which was composed of both the superposition circuit and the measuring circuit. And we investigated the validity of the usefulness of the proposed sensorless method in the magnetic levitation system through results of actual experiment.

• 한국정보통신학회논문지
• /
• 제6권7호
• /
• pp.1079-1083
• /
• 2002

반도체 소자의 정전기 내성을 알아보기 위해 필요한 HBM ESD 테스터를 작자하였다 .HBM ESD 테스트는 MMIC의 정전기 내성을 측정하는 데 가장 많이 사용하는 방식이다. 고전압의 ESD 신호론 얻기 위하여 DC-DC converter의 일종인 flyback 방식온 도입하였다. Flyback 방식으로 제자된 HBM ESD 테스터는 고전압 부분과 저전압 부분을 서로 격리시킬 수 있는 장점이 있다 스위치로 사용된 relay의 air gap을 이용하여 정전기의 rise time이 국제 규격에 맡도록 설계하였다. 결과적으로, flyback 방식과 relay의 air gap을 이용하여 기생 성분이 최소화된 ESD 테스터를 제작하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2002년도 추계종합학술대회
• /
• pp.469-472
• /
• 2002

반도체 소자의 정전기 내성을 알아보기 위해 필요한 HBM ESD 테스터를 제작하였다. HBM ESD 테스트는 MMIC의 정전기 내성을 측정하는데 가장 많이 사용하는 방식이다. 고전압의 ESD 신호를 얻기 위하여 DC-DC converter의 일종인 flyback 방식을 도입하였다. Flyback 방식으로 제작된 HBM ESD 테스터는 고전압 부분과 저전압 부분을 서로 격리시킬 수 있는 장점이 있다. 스위치로 사용된 relay의 air gap을 이용하여 정전기의 rise time이 국제 규격에 맞도록 설계하였다. 결과적으로, flyback 방식과 relay의 air gap을 이용하여 기생 성분이 최소화된 ESD 테스터를 제작하였다.

• The Journal of Advanced Prosthodontics
• /
• 제6권3호
• /
• pp.177-184
• /
• 2014

PURPOSE. The aim of this study was to measure the changes on the marginal and internal adaptation of zirconia based anterior fixed partial dentures after the porcelain firing process. MATERIALS AND METHODS. A total of 34 anterior fixed partial dentures using LAVA CAD/CAM system (3M ESPE, Germany) were applied. Two silicone replicas were obtained: one is obtained before porcelain firing process (initial) and the other is obtained after porcelain firing process (final), followed by the examination under a binocular stereomicroscope. Kruskal Wallis and Wilcoxon Signed Ranks tests were used for the statistical analysis (P<.05). RESULTS. No statistically significant difference was found between initial and final marginal gap values (P>.05). At the internal gap measurements, final marginal area values ($59.54{\mu}m$) were significantly lower than the initial marginal area values ($68.68{\mu}m$)(P<.05). The highest and the lowest internal gap values were observed at the incisal/occlusal area and at the marginal area, respectively. In addition, lower internal gap values were obtained for canines than for central incisors, lateral incisors and premolars at the incisal area (P<.05). CONCLUSION. The firing cycles did not affect the marginal gap of Lava CAD/CAM system, but it is controversial for the internal gap.

• 소음진동
• /
• 제6권3호
• /
• pp.357-362
• /
• 1996

The magnetic levitation system has great advantages, such as little friction, no lubrication, no noise and so on. But the magnetic levitation system need a stabilizing controller because it is a unstable, system in natural and it need a sensor for displacement measurement to control the system. In this paper, we proposed a sensorless method to measure the gap between the magnetic pole and the levitated object with application the inductance characteristic which vary according to gap. We made a driving circuit which supply simultaneously the control input PWM(Pulse Width Modulation) signal and the carrier PWM signal to estimate the gap. Because the inductance is a function of gap, and the current of the carrier signal is a function of the inductance, we could estimate the gap from the measurement of the current of the carrier signal. Finally, we investigated the validity of the proposed method through the experimental results.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.790-793
• /
• 2005

Gap Sensor is widely used to measure vibration in power plant. In general the result of the vibration measurement may have special error due to two thermal characteristics of gap sensor such as sensitivity shift and zero shift. Thermal sensitivity is change of linearity and thermal zero shift is chang of offset. It is investigated two thermal characteristics for Rap son or in this paper.

• Journal of the Optical Society of Korea
• /
• 제12권3호
• /
• pp.210-214
• /
• 2008

A critical angle method was used to measure the index of refraction of a solid medium when an air gap between the prism and the medium is present. The gap effect was analyzed both numerically and experimentally. Since the total internal reflection is severely disturbed by the large gap, determination of the critical angle and the resulting refractive index becomes ambiguous and inaccurate. By using an index matching fluid, we could determine the index of refraction with an uncertainty of ${\pm}2{\times}1^{-3}$ even when the gap is as large as 1 ${\mu}m$.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제27권6호
• /
• pp.660-667
• /
• 2000

본 논문에서는 필기 한글 문자열 영상에 대한 단어 분리 방법을 제안한다. 제안된 방법은 gap 의 크기 정보를 사용하여 단어를 분리하는데, 이때 gap은 문자열 영상을 수직방향으로 투영한 후 흰-런 (white-run)을 찾음으로써 구할 수 있다. 문자열 영상으로부터 얻어지는 gap들의 크기를 측정한 후, 각각의 gap을 단어와 단어사이에 존재하는 gap과 문자와 문자사이에 존재하는 gap 중 하나로 분류한다. 본 논문에서는 필기 영문 문자열의 단어 분리를 위해 제안된 기존의 세 가지 거리 척도를 채택하고 군집화에 기반한 세 가지 분류방법을 적용하여 한글 문자열의 단어 분리를 위한 최적의 조합을 선정하였다. 우편봉투 상에 작성된 주소열로부터 수작업으로 추출한 305 개의 문자열 영상을 사용하여 실험한 결과 BB(bounding box) 거리를 사용하여 순차적 군집 방법을 적용하는 경우 3 순위까지의 누적 단어 분리 성공률이 88.52% 로서 가장 우수한 성능을 보여 주었다. 또한 하나의 문자열 영상에 대한 단어 분리 속도는 약 0.05초이다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.706-713
• /
• 2002

In the multi-pass welding of pressure vessels or ships, the mechanical touch sensor system is generally used together with a manipulator to measure the gap and depth of the narrow gap to perform seam tracking. Unfortunately, such mechanical touch sensors may commit measuring errors caused by the eterioration of the measuring device. An automation system of narrow gap multi-pass welding using a laser vision system which can track the seam line of narrow gap and which can control welding power has been developed. The joint profile of the narrow gap, with 250mm depth and 28mm width, can be captured by laser vision camera. The image is then processed for defining tracking positions of the torch during welding. Then, the real-time correction of lateral and vertical position of the torch can be done by the laser vision system. The adaptive control of welding conditions like welding Currents and welding speeds, can also be performed by the laser vision system, which cannot be done by conventional mechanical touch systems. The developed automation system will be adopted to reduce the idle time of welders, which happens frequently in conventional long welding processes, and to improve the reliability of the weld quality as well.

• 한국소음진동공학회논문집
• /
• 제16권10호
• /
• pp.1057-1066
• /
• 2006

Acoustic streaming Induced by longitudinal vibration at 30 kHz is visualized for a test fluid flow between the stationary glass plate and ultrasonic vibrating surface with particle imaging velocimetry (PIV) To measure an increase in the velocity of air flow due to acoustic streaming, the velocity of air flow in a gap between the heat source and ultrasonic vibrator is obtained quantitatively using PIV. The ultrasonic wave propagating into air in the gap generates steady-state secondary vortex called acoustic streaming which enhances convective cooling of the stationary heat source. Heat transfer through air in the gap is represented by experimental convective heat transfer coefficient with respect to the gap. Theoretical analysis shows that gaps for maximum heat transfer enhancement are the multiple of half wavelength. Optimal gaps for the actual design are experimentally found to be half wavelength and one wavelength. A drastic temperature variation exists for the local axial direction of the vibrator according to the measurement of the temperature distribution in the gap. The acoustic streaming velocity of the test fluid in the gap is at maximum when the gap agrees with the multiples of half wavelength of the ultrasonic wave, which are specifically 6 mm and 12 mm.