• ETRI Journal
• /
• v.35 no.6
• /
• pp.1156-1159
• /
• 2013

We investigate the characteristics of $Cu_2O$ thin films deposited through the addition of $N_2$ gas. The addition of $N_2$ gas has remarkable effects on the phase changes, resulting in improved electrical and optical properties. An intermediate phase ($6CuO{\cdot}Cu_2O$) appears at a $N_2$ flow rate of 1 sccm, and a $Cu_2O$ (200) phase is then preferentially grown at a higher feeding amount of $N_2$. The optical and electrical properties of $Cu_2O$ thin films are improved with a sufficient $N_2$ flow rate of more than 15 sccm, as confirmed through various analyses. Under this condition, a high bandgap energy of 2.58 eV and a conductivity of $1.5{\times}10^{-2}$ S/cm are obtained. These high-quality $Cu_2O$ thin films are expected to be applied to $Cu_2O$-based heterojunction solar cells and optical functional films.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.12
• /
• pp.5745-5758
• /
• 2017

In this paper, we develop a simple but very effective 4 by 4 Multiple-Input Multiple-Output (MIMO) antenna system for mobile phones consisting of different types of antennas to achieve low correlation property at the frequency ranges of 1710 to 2170 MHz, which covers wide LTE service bands, from band 1 to band 4. The proposed antenna system consists of two pair of antennas. Each pair consists of a planar inverted-F antenna (PIFA) and a coupling antenna which has the property of the loop. The use of two different antenna types of IFA and a coupling achieves high isolation. Proposed antenna system occupies relatively small area and positions at the four corners of a printed circuit board. The gap between the two antennas is 4 mm, in order to realize the good isolation performance. To evaluate the performance of our proposed antenna system, we perform various experiments. The proposed antenna shows a wide operating bandwidth greater than 460 MHz with isolation between the feeding ports higher than 17.5-dB. It also shows that the proposed antenna has low Envelop Correlation Coefficient (ECC) values smaller than 0.08 over the all desired frequency tuning ranges.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.481-487
• /
• 2010

The equivalent circuits intended to analyze the characteristics of IPT systems can be shown in structures similar to those of existing transformers. IPT systems are composed of combinations of the primary and secondary coils based on magnetic coupling, and the performances are determined by the lengths or the degrees of magnetic coupling of current collecting conductors(secondary) and feeding rails (primary) and system performances become the maximum when they are coupled under the optimum condition. To maximize the output currents of the secondary side, the shapes of iron cores and the structures of coils etc should be considered. To this end, three types of IPT system simulation models were selected and they were analyzed using an electromagnetic field analyzing program. To compare the types with each other, the sizes of the IPT systems and the primary side voltages etc were made to be the same. The electromagnetic fields were analyzed while changing the thicknesses of the cores and the lengths of the air gap etc and the results were analyzed in order to derive the optimum specifications.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.20 no.1
• /
• pp.61-64
• /
• 2017

Recurrent acute pancreatic attacks is a rare clinical condition (2-5% of all acute pancreatis) in children and is mainly idiopathic in most cases. Sometimes it may be associated with congenital anomalies, metabolic diseases or hereditary conditions. Isovaleric acidemia (IVA) is a rare autosomal recessive amino acid metabolism disorder associated with isovaleryl coenzyme A dehydrogenase deficiency presenting the clinical findings such metabolic acidosis with increased anion gap, hyperammonemia, ketonemia, hypoglycemia, "the odor of sweaty feet," abdominal pain, vomiting, feeding intolerance, shock and coma. Recurrent acute pancreatitis associated with IVA have been rarely reported. Herein; we report a child who admitted with recurrent acute pancreatic attacks and had the final diagnosis of IVA. Mutation analysis revealed a novel homozygous mutation of (p.E117K [c.349G>A]) in the IVA gene. Organic acidemias must kept in mind in the differential diagnosis of recurrent acute pancreatic attacks in children.

• Toxicological Research
• /
• v.32 no.1
• /
• pp.21-33
• /
• 2016

Dichlorodiphenyltrichloroethane (DDT) is still used in certain areas of tropics and subtropics to control malaria and other insect-transmitted diseases. DDT and its metabolites have been extensively studied for their toxicity and carcinogenicity in animals and humans and shown to have an endocrine disrupting potential affecting reproductive system although the effects may vary among animal species in correlation with exposure levels. Epidemiologic studies revealed either positive or negative associations between exposure to DDT and tumor development, but there has been no clear evidence that DDT causes cancer in humans. In experimental animals, tumor induction by DDT has been shown in the liver, lung, and adrenals. The mechanisms of hepatic tumor development by DDT have been studied in rats and mice. DDT is known as a non-genotoxic hepatocarcinogen and has been shown to induce microsomal enzymes through activation of constitutive androstane receptor (CAR) and to inhibit gap junctional intercellular communication (GJIC) in the rodent liver. The results from our previously conducted 4-week and 2-year feeding studies of p,p'-DDT in F344 rats indicate that DDT may induce hepatocellular eosinophilic foci as a result of oxidative DNA damage and leads them to hepatic neoplasia in combination with its mitogenic activity and inhibitory effect on GJIC. Oxidative stress could be a key factor in hepatocarcinogenesis by DDT.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.63-64
• /
• 2015

In this paper, a microstrip array antenna capacitively coupled to a microstrip line is studied. The array antenna consists of uniformly spaced rectangular microstrip patches arranged close to a feeding microstrip line on a grounded dielectric substrate. The effects of various parameters, such as strip width and length, distance between adjacent patches, gap between strip patches and microstrip feed line, on the antenna performance were examined. By properly adjusting geometrical parameters, the array suitable for a high gain antenna for use in a frequency band centered at 12.5 GHz was designed.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.15.2-15.2
• /
• 2009

Manufacturing of printed electronics using printing technology has begun to get into the hot issue in many ways due to the low cost effectiveness to existing semi-conductor process. This technology with both low cost and high productivity, can be applied in the production of organic thin film transistor (OTFT), solar cell, radio frequency identification (RFID) tag, printed battery, E-paper, touch screen panel, black matrix for liquid crystal display (LCD), flexible display, and so forth. The emerging technology to manufacture the products in mass production is roll-to-roll printing technology which is a manufacturing method by printings of multi-layered patterns composed of semi-conductive, dielectric and conductive layers. In contrary to the conventional printing machines in which printing precision is about $50~100{\mu}m$, the printing machines for printed electronics should have a precision under $30{\mu}m$. In general, in order to implement printed electronics, narrow width and gap printing, register of multi-layer printing by several printing units, and printing accuracy of under $30{\mu}m$ are all required. We developed the roll-to-roll printing equipment used for printed electronics, which is composed of un-winder, re-winder, tension measurement system, feeding units, dancer systems, guide unit, printing unit, vision system, dryer units, and various auxiliary devices. The equipment is designed based on cantilever type in which all rollers except printing ones have cantilever types, which could give more accurate machine precision as well as convenience for changing rollers and observing the process.

• Journal of Animal Science and Technology
• /
• v.53 no.5
• /
• pp.475-480
• /
• 2011

This study was conducted to investigate the effects of different feeding level of TDN (Total Digestible Nutrients) on the generation of main greenhouse gases such as carbon dioxide and methane in Hanwoo cows. The diet TDN (kg) adjusted to achieve ADG of 0 g/day (Control), 200 g/day (T1), and 400 g/day (T2) of the maintenance level TMR (Total Mixed Ration) delivered twice a day at 08:30 and 17:30. Cow are housed in a respiration chamber and the environmental temperature was maintained at $20^{\circ}C$. The gases were measured for 24 hours using the multi-detector instrument Mamos-300. The analyzed methane emissions of T1 and T2 were 33.5% and 69.6% higher than control, respectively, and the carbon dioxide emissions were 21.1% and 40.6% higher than control. Also, the hourly pattern of carbon dioxide and methane production were showed very similar emission. Gas production showed peak after 1 hour of feeding and this gap was wider in the afternoon than in the morning hours. It is clearly conducted that $CO_2$ and $CH_4$ emissions were different by limited intake levels of feed.

• Korean Journal of Environmental Agriculture
• /
• v.24 no.3
• /
• pp.295-302
• /
• 2005

The nitrogen (N) balance in Korea during 1985-1997 was calculated according to the surface balance method of the PARCOM guidelines and compared with Japanese N balance. The some differences were founded in the coefficients used on calculating N balance in two nations. Of the important parameters, which can make a big difference in balance, N input by organic fertilizers was not included in Korea different with Japanese, due to absence of reliable statistics and then made lower the input. Nitrogen destruction rate from livestock manure was adjusted differently with 15% in Korea but 28% in Japan. There was some difference in the conversion factors of livestock number into manure N quantity in two nations, but the gap was ignoble scale except beef cattle. Our manure N production rate of beef cattle might be evaluated to be so lower than Japanese. Biological N fixation by pulses was very higher in Korea than in Japan but scarcely affect the increase of total N input, due to small cultivation area. In contrast, N fixation rate by free-living organisms in Korean and Japanese wet paddies showed the big difference with 7.6 and $37.0kg\;ha^{-1}\;yr^{-1}$, respectively, and therefore $29.4kg\;ha^{-1}\;yr^{-1}$ of nitrogen was estimated to be more inputted in Japan. Although there are many points to be more specified and improved, still, Korean N balance was very high with $250-257kg\;ha^{-1}$ in the mid of 1990s, which was the second highest level in OECD countries and furthermore increased continuously during the investigation. In contrast in Japan, which has similar fanning system with Korea, N balance was lower with $130-158kg\;ha^{-1}$ and has decreased continuously since 1993. This high N balance was mainly due to a high usage of chemical fertilizers in our intensive fanning system and the fast increment of livestock feeding. Therefore, the more active action to decrease chemical fertilizer utilization and reduce livestock feeding density is required in the government and farmer sides.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.19 no.2
• /
• pp.130-134
• /
• 1997

The sagittal split ramus osteotomy(SSRO) of the mandible has used one of the most popula methods for the correction of various dentofacial deformities, especially mandibular prognathism. In SSRO, there are produced bony gap following mandible setback because of mandibular flaring. For this reason, the condylar axis may be changed due to bony approximation both segment in three dimension more mesio-laterally. According to change of condylar position, the condition of TMJ structure are changed and change of TMJ symptoms are suggested theoretically, and the correction of malocclusion by SSRO may improve the TMJ symptoms by improvement of feeding difficulties. The pupose of this study was to determine relationship between expected alterations in condylar position and suggested TMJ symptoms produced by change of condylar position. TMJ symptoms of 15patients who had operated SSRO are checked at about postoperative 6 month ranging $5{\sim}11$ month. Anterior-posterior position of condyle which was comparison preoperative with postoperative position, was classified 5 groups. The author tried to identify relationship between positional change of condyle and TMJ discomfort.