• 제어로봇시스템학회논문지
• /
• 제18권7호
• /
• pp.627-631
• /
• 2012

Observable mathematical model of DDM (Direct Dirve Motor) was suggested. The motor that operates the object system directly is called DDM. DDM has many strong points, however, it has a significant disadvantage, that it is more sensitive to the external force than the motor with reduction gear. In other word, if the force is applied, air gap of the motor can be perturbed. This causes not only difficulty in motor control but also even more serious problem, such as the breakdown of motor. However, if the air gap variation can be estimated, it can help prevent these problems. DDM should be modeled to estimate the air gap variation. The type of researched DDM is PMSM (Permanent Magnet Synchronous Motor) and precedent model of PMSM includes only characteristics of electro-magnetic system and rotational motion. However, suggested model should also include characteristics of translational motion of rotor to estimate the air gap variation. Also, this model should satisfy observability condition, because state observer is designed based on this model.

• 대한전자공학회논문지TC
• /
• 제44권1호
• /
• pp.93-97
• /
• 2007

본 논문에서는 위성 DMB용 Gap Filler의 TDM-CDM변환부를 위한 클럭 생성 방안을 제안하였다. 제안된 방식은 위성으로 부터 수신되는 Ku band(12.2GHz) 대역의 TDM신호에서 복조된 프레임 동기 신호를 기반으로 신호 변환 시스템의 클럭을 공급하는 VCXO(Voltage Controlled Crystal Oscillator)를 제어하여 신호 변환부의 클럭 및 데이터 동기를 제공한다. 기존의 일반적인 클럭 동기 방식과 같은 별도의 PLL을 구성할 필요 없이 Gap Filler의 디지털 신호 변환부에 사용되는 FPGA내부에 간단히 구현될 수 있으며, 주파수 오차범위를 측정 제어할 수 있는 기능을 포함하고 있어 안정도가 높은 OCXO(Oven Controlled Crystal Oscillator)를 사용할 경우 RF부에 필요한 LO( Local Oscillator)를 위한 기준 클럭으로 사용될 수 있다.

• 열병합발전
• /
• 통권77호
• /
• pp.18-22
• /
• 2010

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.99-99
• /
• 2012

본 개발에서는 초고속복합분자펌프 구동을 위한 디지털 구동장치를 설계하였다. BLDC구동을 위한 디지털 제어 시스템의 핵심제어 보드 설계 및 모듈 설계를 하여 보드제작 및 기본성능평가를 하고 고속 회전 실험을 하였다. AMB제어기는 넓은 제어대역폭을 확보하기 위하여 FPGA 1개와 마이크로 콘트롤러 2개를 사용하여 구성하였으며 FPGA로 AMB구동을 위한 PWM기능과 CPU 2개의 원활한 Data 통신을 위하여 Dual Memory을 구현하였으며 PWM의 디지털노이즈 회피를 위하여 AMB구동용 PWM과 동기화하여 Gap Sensor 및 전류센서신호 샘플링할 수 있도록 ADC를 구동 및 샘플링한다. 그리고 Gap Sensor 구동 회로와 제어기회로를 하나의 보드로 구연하였다.

• 대한조선학회논문집
• /
• 제44권2호
• /
• pp.101-110
• /
• 2007

Recently, rudder erosion due to cavitation frequently has occurred at large high speed container carriers. Especially, in the case of a horn-type rudder, the rudder erosion is severe around a gap. The gap-flow characteristics are investigated through a computational method to understand the effects of a gap on the cavitation and rudder efficiency. A viscous flow theory utilizing a cavitation model is applied to calculate the flow around idealized 2-dimensional rudder sections in a full scale. The effects of gap clearance and flow-control projection are also investigated. From the computational results, the mass flow rate through a gap is found to be one of the important parameters to affect the cavitation and rudder efficiency.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.52-55
• /
• 1997

This paper discusses an automatic visual-servoing system, in which a laser and a CCD camera are used for imaging the pattern of joint groove. The algorithm used here is simple and robust to find out the gap width and gap center. As a consequence, the speed of algorithm is very fast and optimized. A feature of this system is that it processes only by summing the vertical line and horizontal line of screen without any image preprocessing in order to get the energy information of lines alternatively. It is practical and useful for the system requiring a fast process time of vision.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 춘계 학술대회 학술발표 논문집
• /
• pp.51-54
• /
• 2003

진화하드웨어는 하드웨어 스스로 진화하여 필요한 회로를 구성한다 회로를 재구성하기 위해서 유전자 알고리즘을 사용한다. 유전자 알고리즘(Genetic Algorithm)은 전역적 탐색을 통하여 해를 구한다. 하지만 유전자 알고리즘은 많은 개체의 평가를 통하여 이루어지기 때문에 수행하는데 시간이 많이 소요된다. 이전의 연구에서 유전자 알고리즘 프로세서를 이용하여 진화하드웨어를 구성했다. 유전자 알고리즘 프로세서는 유연성이 떨어지고 범용적으로 사용하기 어렵다. 본 논문에서는 CPU를 이용하여 유전자 알고리즘 프로세서를 소프트웨어로 제어하는 방법을 제안한다 소프트웨어로 합성한 신호로 GAP의 동작을 제어하기 때문에 유연성을 가질 수 있다 FPGA에 CPU와 유전자 알고리즘 프로세서를 구현하여 one-chip 하드웨어를 구현한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.626-630
• /
• 2005

This paper presents a novel Intelligent-Welding-Carriage (IWC) for automation of curved block in shipbuilding. The curved block is usually used in both front and back side of the ship. In curved block root gap is big, $1{\sim}7$ [mm] and inclination, $0{\sim}30$ [deg]. Since available conventional carriage type is limited to use below root gap of 3 [mm], only manual welding is employed in curved block. To adopt an IWC in curved block, it requires control of the welding conditions, i.e., voltage, current and travel speed, with respect to root gap and inclination to achieve good welding quality. In this paper, an IWC is developed for automization of welding operation to accommodate gap and inclination. Kinematics model and dynamics using Lagrangian formulation of the manipulator is introduced. IWC utilizes a database to perform accurate welding. The database is programmed based on numerous experimental test results with respect to gap, inclination, material, travel speed, weaving condition, voltage, and current. Finally, experimental result using PID control is addressed for verify the trajectory tracking accuracy of end-effector.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국제학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.794-797
• /
• 1988

G. Binnig and H. Rohrer introduced the Scanning Tunneling Microscope (STM) in 1982 and developed it into a powerful and not to be missed physical tool. Scanning tunneling Microscopy is a real space surface imaging method with the atomic or subatomic resolution in all three dimensions. The tip is scanned over the surface by two piezo translators mounted parallel (X-piezo and Y-piezo) to the surface and perpendicular to each other. The voltage applied to the third piezo (Z-piezo) translator mounted perpendicular to the surface to maintain the tunneling current through the gap at a constant level reflects then the topography of the surface. The feed back control loop for the constant gap current is designed using the automatic control technique. In the designing process of the feed back loop, the identification of the gap dynamics is very complex and has difficulty. In this research, using some suitable test signals, the system dynamics of the gap including the Z-piezo are investigated. Especially, in this paper, a system model is proposed for the gap and Z-piezo series system. Indicial response is used to find out the model. The driving voltage of the Z-piezo and the tunneling current are considered as input and output signals respectively.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.699-703
• /
• 1991

A magnetic levitation system with hybrid magnets, which is composed of permanent magnets and electromagnets, consumes less power than the conventional attraction type system. In this paper, we propose PID controller and PID-Fuzzy controller for hybrid magnet. We first present "constant gap" control technology with PID controller. Secondly, "zero power" control technology with PID-Fuzzy hybrid controller is presented.roller is presented.