• 전기전자학회논문지
• /
• 제22권1호
• /
• pp.209-212
• /
• 2018

본 논문에서는 P(VDF-TrFE)유기물 강유전체 기반 metal-ferroelectric-metal (MFM) capacitor 와 차세대 반도체 물질인 질화갈륨 반도체를 활용한 네거티브 커패시턴스 전계효과 트랜지스터를 제작 및 분석 하였다. 27 nm의 두께의 P(VDF-TrFE) MFM 커패시터의 분극지수는 4 MV/cm에서 $6{\mu}C/cm^2$ 값을 나타내었으며 약 65 ~ 95 pF의 커패시턴스 값을 나타내었다. 강유전체의 커패시턴스와 전계효과 트랜지스터의 커패시턴스 매칭을 분석하기 위해 제작된 P(VDF-TrFE) MFM 커패시터는 GaN 전계효과 트랜지스터의 게이트 전극에 집적화 되었으며 집적화되기 전 104 mV/dec 의 문턱전압 이하 기울기에서 82 mV/dec 값으로 개선된 효과를 보였다.

• 소성∙가공
• /
• 제33권2호
• /
• pp.118-122
• /
• 2024

Micro-electromechanical systems (MEMS) based in-situ heating holders have been developed to enable high resolution imaging of heat treatment analysis. However, unlike the standard 3 mm metal disk specimens used in the furnace-based heating holder and general transmission electron microscopy holder, the MEMS-based in-situ heating holder requires thin specimens that can be penetrated by electrons to be transferred onto the MEMS chip. Previously, focused ion beam milling was used to transfer metal specimens, but it has the disadvantage of being expensive and the risk of specimen damage due to gallium ions. Therefore, in this study, we devised a method of transferring metallic materials by ultrasonic treatment using a transmission electron microscopy specimen made by electro jet polishing. A 3mm electropolished metal disk was placed in an appropriate solution, ultrasonicated, and then drop casted. The transfer of the specimen was successful, but it was confirmed that dislocations were formed inside the specimen due to ultrasonic treatment. This study provides a novel method for transferring metallic materials onto MEMS chips, which is cost-effective and less gallium ion damaging to the specimen. The results of this study can be used to improve the efficiency of heat treatment analysis using MEMS-based in-situ heating holders.

• Bulletin of the Korean Chemical Society
• /
• 제29권2호
• /
• pp.372-376
• /
• 2008

The hydrolysis of gallium(III) has been studied using potentiometric techniques under physiological conditions of temperature 37 C and ionic strength 0.15 moldm-3 NaCl and at different metal ion concentrations. Changes in pH were monitored with a glass electrode calibrated daily in hydrogen ions concentrations. The titration data within the pH range of 2.5-9.99 were analyzed to determine stability constants of hydroxide species using the SUPERQUAD program. Several different species were considered during the calculation procedure and the following hydroxides have been characterized: Ga(OH)3, Ga(OH)4- Ga3(OH)112-, Ga4(OH)11+ and Ga6(OH)153+. Speciation calculations based on the determined constants were then used to simulate the species distribution.

• 한국결정학회지
• /
• 제9권2호
• /
• pp.131-137
• /
• 1998

결정결함의 밀도가 낮은 GaN epitaxy 막을 MOCVD(metal organic chemical vapour deposition) 방법에 의해 성장시켰다. 기판은 6H-SiC를 사용하였으며, AlN과 GaN으로 구성된 이중 buffer 층을 도입하였다. GaN buffer 층은 반응원료인 trimethyl gallium(TMG)과 NH3 가스를 교호식펄스공급(alternating pulsative supply, APS)방법에 의해 만들었다. AlN buffer/6H-SiC 위에 초기단계에 형성되는 GaN 섬은 APS처리에 의해 크기가 커지는 것을 AFM(atomic force microscope)으로 관찰하였다. Buffer 층의 역할은 그 위에 성막시킨 GaN epitaxy 막의 결정성과 결함밀도에 의해 조사하였다. 성막된 GaN의 결정구조와 결정성은 DCXRD(double crystal X-ray diffractormeter)에 의해 측정되었다. 결정결함은 EPD(etching pit density)를 측정하는 방법으로 알칼리혼합용에서 처리된 막을 SEM(scanning electron microscope)으로 관찰하였다.

• Bulletin of the Korean Chemical Society
• /
• 제28권1호
• /
• pp.17-28
• /
• 2007

Indium and gallium have emerged as useful metals in organic synthesis as a result of its intriguing chemical properties of reactivity, selectivity, and low toxicity. Although indium belongs to a main metal in group 13, its first ionization potential energy is very low and stable in H2O and O2. Therefore, indium-mediated organic reactions are of our current interest. On the basis of these properties of indium, many efficient indium-mediated organic reactions have been recently developed, such as the addition reactions of allylindium to carbonyl and iminium groups, the indium-mediated synthesis of 2-(2-hydroxyethyl)homoallenylsilanes, the indiummediated allylation of keto esters with allyl halides, sonochemical Reformatsky reaction using indium, the indium-mediated selective introduction of allenyl and propargyl groups at C-4 position of 2-azetidinones, the indium-mediated Michael addition and Hosomi-Sakurai reactions, the indium-mediated β-allylation, β- propargylation and β-allenylation onto α,β-unsaturated ketones, the highly efficient 1,4-addition of 1,3-diesters to conjugated enones by indium and TMSCl, and the intramolecular carboindation reactions. Also, we found gallium-mediated organic reactions such as addition reactions of propargylgallium to carbonyl group and regioselective allylgallation of terminal alkynes.

• 자원리싸이클링
• /
• 제9권3호
• /
• pp.22-28
• /
• 2000

아연재련전사로부터 갈륨을 회수하기 위하여 NaOH용액을 사용한 알칼리 침출실험을 수행하였다. 실험결과 아연질산을 NaOH용액으로 알칼리 침출할 경우 주로 침출되는 원소는 Zn, K 및 Si 등이며, Fe를 비롯한 여러 base metal들은 극히 미량만이 침출되기 때문에 용매추출 공정을 통해 용이하게 갈륨을 정제할 수 있다. 한편 알칼리 침출의 특징은 알칼리 농도가 증가할수록 그리고 광액농도가 낮을수록 갈륨의 침출율이 증가하며, 특히 침출에 앞서 아연잔사를 물로 세척하여 용해성 아연화합물을 미리 제거하면 알칼리 소모량을 상당히 줄일 수 있는 것으로 나타났다. 대체로 갈륨의 적정 침출조건은 아연잔사를 물로 세척하여 용해성 아연화합물을 미리 제거하고 광액농도 333g/L NaOH 농도 1~1.25 M/L로 하여 상온$25^{\circ}C$에서 2시간 정도 침출하는 것이 효과적이며, 이 경우 약 80%이상의 갈륨을 회수 할 수있다.

• 한국전자파학회논문지
• /
• 제27권1호
• /
• pp.8-13
• /
• 2016

본 논문에서는 잉크젯 프린팅 기술을 이용하여 종이 필름 위에 전도성 잉크를 인쇄하여 방사 패턴 변환이 가능한 종이접기 형태의 안테나를 제안한다. 제안된 안테나는 접었을 때와 펼쳤을 때 각각 다이폴 안테나와 루프 안테나로 동작하며, 종이 필름을 접고 펼치는 방식에 따라 상호 변환될 수 있다. 제안된 안테나는 다이폴 상태와 루프 상태일 때 모두 동일하게 1.85 GHz에서 동작하도록 설계되었다. 종이 필름을 접었을 때 종이 필름의 코팅과 그 위에 인쇄된 전도성 잉크가 깨짐 현상을 해결하기 위해 액체금속(liquid metal)중 하나인 EGaIn(Eutectic Gallium Indium)을 사용하였다. 제안된 안테나의 성능은 시뮬레이션과 실제 측정 결과로 확인할 수 있으며, 다이폴 상태와 루프 상태일 때 안테나 이득은 각각 -4 dBi, -5 dBi이다. 또한, 측정 결과, 다이폴 상태와 루프 상태일 때 서로의 Null 부분을 서로 상호 보완해 주는 것을 확인할 수 있다.

• 한국군사과학기술학회지
• /
• 제26권3호
• /
• pp.246-251
• /
• 2023

RADAR(Radio Detection and Ranging) is an important system for surveillance and reconnaissance by detecting a reflected signal which obtains the range from the radar to the target, and the velocity of the target. The magnitude of the reflected signal varies due to the radar cross section of the target, characteristic of the transmission and reception antenna, distance between the radar and the target, and power and wavelength of the transmitted signal. Thus, the RCS is the important characteristic of the target to determine if the target can be observed by the RADAR system. It is based on the material and shape of the target. We have measured the reflection signal of a simple square-shaped (20 × 20 cm) target made of a new material, a gallium-based liquid metal alloy and compared that of well-known metals including copper, aluminum. The magnitude of reflected signal of the aluminum target was the largest and it was 2.4 times larger than that of the liquid metal target. We also investigated the effect of the shape by measuring reflectance of the F-22 3D model(~1/95 ratio) target covered with/without copper, aluminium, and liquid metal. The largest magnitude of the reflected signal measured from side-view with the copper-covered F-22 model was 2.6 times greater than that of liquid metal. The reflectance study of the liquid metal would be helpful for liquid metal-based frequency selective surface or metamaterials.

• Current Applied Physics
• /
• 제18권11호
• /
• pp.1381-1387
• /
• 2018

One dimensional (1D) grating has been fabricated (using focused ion beam) on 50 nm gold (Au) film deposited on higher refractive index Gallium phosphate (GaP) substrate. The sub-wavelength periodic metal nano structuring enable to couple photon to couple with the surface plasmons (SPs) excited by them. These grating devices provide the efficient control on the SPs which propagate on the interface of noble metal and dielectric whose frequency is dependent on the bulk electron plasma frequency of the metal. For a fixed periodicity (${\Lambda}=700 nm$) and slit width (w = 100 nm) in the grating device, the efficiency of SPP excitation is about 40% compared to the transmission in the near-field. Efficient coupling of SPs with photon in dielectric provide field localisation on sub-wavelength scale which is needed in Heat Assisted Magnetic recording (HAMR) systems. The GaP is also used to emulate Vertical Cavity Surface emitting laser (VCSEL) in order to provide cheaper alternative of light source being used in HAMR technology. In order to understand the underlying physics, far-and near-field results has been compared with the modelling results which are obtained using COMSOL RF module. Apart from this, grating devices of smaller periodicity (${\Lambda}=280nm$) and slit width (w = 22 nm) has been fabricated on GaP substrate which is photoluminescence material to observe amplified spontaneous emission of the SPs at wavelength of 805 nm when the grating device was excited with 532 nm laser light. This observation is unique and can have direct application in light emitting diodes (LEDs).

• 산업기술연구
• /
• 제43권1호
• /
• pp.25-31
• /
• 2023

Stretchable and flexible electronics that comply with dynamic movements and micromotion of the human tissues can enable real-time monitoring of physiologic signals onto the human skin and in the brain, respectively. Especially, gallium based liquid metal stretchable electronics can offer human-interactive biosensors to monitor various physiologic parameters. However, the liquid-like nature, surface oxidation and contamination by organic materials, and low biostability of the liquid metals have still limited the long-term use as bioelectronics. Here we introduced electrochemical deposition without oxidation pathways to overcome these practical challenges in liquid metal bioelectronics. CNT/PDDA composite with reduction way and PEDOT:BF₄ with oxidation way under organic solvent are suggested as rationally designed material engineering approaches. We confirmed that the structures with the soft, flexible, and stretchable liquid metal platform can successfully detect dopamine with a high sensitivity and selectivity, record neural signals including action potentials without scar formation, and monitor physiologic signals such as EMG and ECG.