A highly sensitive magnetic sensor using the Giant MagnetoImpedance effect has been developed. The sensor performance is studied and estimated. The sensor circuitry consists of a square wave generator (driving source), a sensing element in a form of composite wire of a 25 $\mu$m copper core electrodeposited with a thin layer of soft magnetic material ($Ni_{80}Fe_{20}$), and two amplifier stages for improving the gain, switching mechanism, scaler circuit, an AC power source driving the permeability of the magnetic coating layer of the sensing element into a dynamic state, and a signal pickup LC circuit formed by a pickup coil and an capacitor. Experimental studies on sensor have been carried out to investigate the key parameters in relation to the sensor sensitivity and resolution. The results showed that for high sensitivity and resolution, the frequency and magnitude of the ac driving current through the sensing element each has an optimum value, the resonance frequency of the signal pickup LC circuit should be equal to or twice as the driving frequency on the sensing element, and the anisotropy of the magnetic coating layer of the sensing wire element should be longitudinal.
The use of internal-model-based linear controller, such as resonant controller, is a well-established technique for the current control of grid-connected systems. Attractive properties for resonant controllers include their two-sequence tracking ability, the simple control structure, and the reduced computational burden. However, in the case of continuous-designed resonant controller, the transient performance is inevitably degraded at a low switching frequency. Moreover, available design methods for resonant controller is not able to realize the direct design of transient performances, and the anticipated transient performance is mainly achieved through trial and error. To address these problems, the zero-order-hold (ZOH) characteristic and inherent time delay in digital control systems are considered comprehensively in the design, and a corresponding hold-equivalent discrete model of the grid-connected converter is then established. The relationship between the placement of closed-loop poles and the corresponding transient performance is comprehensively investigated to realize the direct mapping relationship between the control gain and the transient response time. For the benefit of automatic tuning and real-time adaption, analytical expressions for controller gains are derived in detail using the required transient response time and system parameters. Simulation and experimental results demonstrate the validity of the proposed method.
We propose an adaptive non-singular terminal sliding-mode control for the fast finite-time convergence (FANTSMC) in robot manipulator. The proposed FANTSMC approach is developed to be applied without singularity in robot manipulator, which has a new pole-placement control with the non-singular terminal sliding variable while generating the desirable control torque. Moreover, the switching gain is designed to suppress the time-delayed estimation error appropriately, which aims at providing the high robust tracking performance. Also, the proposed one employs one-sample delayed information to cancel out the system uncertainties and disturbances. For these reasons, it offers strong attraction within the finite time. It is shown that the tracking performance of the proposed FANTSMC approach is guaranteed to be uniformly ultimately bounded through the Lyapunov stability. The effectiveness of the proposed FANTSMC approach is illustrated in simulations, which is compared with that of the up-to-date control approach.
본 논문은 GaN(Gallium Nitride) HEMT(High Electron Mobility Transistor)를 이용한 S대역 레이더용 전력증폭기 설계하고 제작된 스위칭 모드 전력증폭기의 ruggedness 시험에 관련된 내용을 기술하였다. 고효율 특성을 위해 전력증폭기를 Class-F로 설계하였으며, 측정을 위한 입력 신호는 $100{\mu}s$의 pulse width 및 10 %의 duty cycle인 pulse 신호를 사용하였다. 제작된 Class-F 전력증폭기의 중심 주파수에서 측정한 결과, 8.7 dB의 전력 이득과 42 dBm의 출력 전력, 54.2 %의 전력 부가 효율(PAE) 및 62.6 %의 드레인 효율이 측정되었다. 또한, 전력증폭기의 신뢰성 시험의 일환으로 Ruggedness 시험을 위한 실험 구성을 제안하고, VSWR(Voltage Standing Wave Ratio)을 변화시켜 출력 전력과 효율을 측정하였다. 설계된 전력증폭기가 VSWR 변화에 따라 출력 전력 32.6~41.1 dBm까지 변화하고, 드레인 효율은 23.4~63 %까지 변하는 특성을 얻을 수 있었다.
Objectives : The purpose of this study was to examine the changes in metabolic parameters and Positive and Negative Syndrome Scale (PANSS) scores of patients previously treated with atypical antipsychotic drugs other than paliperidone, after 8 weeks of treatment with paliperidone. Methods : Changes in body weight, body mass index, leptin, lipid levels, fasting glucose, and PANSS scores of patients who switched from other atypical antipsychotic drugs to paliperidone were measured after 8 weeks of treatment with paliperidone. We compared these results with those of patients who had not been treated with antipsychotic drugs for at least 2 weeks prior to treatment with paliperidone (antipsychotic drug-free patients). Results : The antipsychotic drug-free group (n = 9) did not show significant changes in metabolic parameters, but showed a significant improvement in total and subscale scores of PANSS. In the group that switched from other atypical antipsychotic drugs to paliperidone (n = 13), body weight, body mass index and fasting glucose level significantly increased, while total and subscale scores of PANSS significantly improved. Conclusions : Paliperidone treatment will benefit patients with schizophrenia who have been antipsychotic drug-free or who have had difficulty with other atypical antipsychotic drugs, with regard to their psychopathological state. However, if patients have been treated with other atypical antipsychotic drugs before switching to paliperidone, they could gain body weight or their fasting glucose level could increase over a short period because of a change in receptor number and sensitivity caused by the previously prescribed antipsychotic drugs, and hence, paliperidone should be prescribed with caution for these patients.
본 논문에서는 능동-가중치 전하 샘플링을 이용하는 고차의 시간상 이동평균 필터가 제안된다. 샘플링되는 전하의 비율을 바꾸기 위해서 가변 트랜스컨덕턴스 증폭기(variable transconductance OTA)가 전하 샘플러 앞단에 사용되며, 전하의 비율은 OTA의 제어 트랜지스터들을 스위칭하여 효과적으로 변하게 된다. 그 결과, 능동-가중치 샘플링을 이용하는 고차의 시간상 이동평균 연산이 가능해진다. 또한, OTA의 트랜스컨덕턴스는 제어 트랜지스터들의 크기를 통해 비율이 조절되므로 비교적 정확하며 공정 변화에 안정적이다. 고차의 시간상 이동평균 필터는 소수의 스위치와 샘플링 커패시터를 사용하므로 작은 크기와 높은 전압 이득을 가지며 기생 성분의 발생을 줄일 수 있다. 제안된 고차의 시간상 이동평균은 2차-2입력 시간상 이동평균 (TMA-$2^2$) 필터로 TSMC $0.18-{\mu}m$ CMOS 공정을 이용하여 구현되었다. 설계된 필터의 전압 이득은 약 16.7 dB이며 P1dB와 IIP3는 각각 -32.5 dBm과 -23.7 dBm으로 시뮬레이션된다. 출력 버퍼를 포함한 전체 직류 전류 소모는 약 9.7 mA이다.
본 논문에서는 다중 대역에서 매크로-마이크로 주파수 튜닝이 가능한 소형의 패치 모노폴 안테나를 소개하였다. 제안된 재구성 안테나는 PCB 기판(FR-4: $\varepsilon_r=4.4$ and tan $\delta=0.02$) 위에 미앤더(meander) 형태의 안테나로 설계하였고, Wibro(2.3~2.4 GHz)와 WLAN a/b(2.4~2.5 GHz/5.15~5.35 GHz)대역에서 일정한 이득을 유지하면서 각각의 서비스 대역에서 동작한다. 두 개의 다이오드, 핀 다이오드와 버렉터 다이오드가 주파수 튜닝을 위해 안테나 상에 내장되었으며, 핀 다이오드는 2 GHz와 5 GHz의 대역을 스위칭(매크로 튜닝)하기 위해 사용되었으며, 버렉터 다이오드는 2.3~2.5 GHz와 5.15~5.35 GHz의 서비스 대역 내 미세 주파수 튜닝(마이크로 튜닝)을 위하여 사용되었다. 또한, 두 주파수 대역(2 GHz와 5 GHz) 사이에서의 불요 공진(spurious resonance)은 미앤더(meander) 사이의 갭을 조정하여 제거되었다. 안테나는 각각의 서비스 대역에서 2 dBi 이상의 일정한 이득을 보인다. 제안된 안테나의 측정 결과는 매크로-마이크로 주파수 튜닝 기술이 재구성 가능한 다중 대역 다중 모드(Multi-Mode Multi-Band: MMMB) 무선 통신 시스템에서 유용하게 사용될 수 있음을 보여준다.
본 논문에서는 크로스(CROSS) 포트에 광섬유 지연선로가 연결된 $2\times2$ 광 스위치들로 구성된 광섬유 지연선로 행렬과 다파장 광원을 이용한 2차원 위상 배열 안테나(Phased Array Antenna; PAA)용 광 실시간 지연선로(True Time-Delay ; TTD)의 구조를 제안하였고, 파장 의존형 광 TTD와 파장 비의존형 광 TTD를 결합하여 10-GHz 2차원 PAA용 2-비트$\times$4-비트 광 TTD를 제작하였다. 단위 시간 지연 차이가 각각 ${\Delta}T=12ps$와 $\Delta\tau=6ps$인 파장 의존형 광 TTD와 파장 비의존형 광 TTD의 모든 주사각에 대해서 시간지연을 측정하였다. 파장 의존형 광 TTD의 시간 지연 오차는 지터에 의해 최대 2.8 ps가 발생하였으며, 파장 비의존형 광 TTD의 경우에는 ${\pm}0.8ps$이하의 오차가 나타났다. 제안된 2차원 PAA용 광 TTD의 구조는 1차원 선형 PAA보다 높은 이득을 얻을 수 있고, 다파장 광원을 사용하므로 광 파워 및 파장의 안정성을 확보할 수 있으며, 전기적 스위치 제어기를 이용하여 $2\times2$ 광 스위치 행렬을 열(column) 단위로 절체하기 때문에 주사 빔 제어 속도가 빠르고 구동이 간단한 장점을 갖고 있다.
본 논문에서는 다중빔 스위칭 기능을 갖는 Ka 대역 통신해양기상위성의 통신 중계기를 이용한 고속 통신 서비스를 위한 링크 설계와 양질의 전송 서비스를 제공할 수 있는 최적의 전송 채널을 제안한다. 다양한 전송 서비스를 제공하는 Ka 대역 통신 중계기의 열화 요인으로 작용하는 군지연 및 비선형 그리고 이득 평탄도에 대한 채널 모델링과 성능 열화를 해석한다. 전송 데이터가 증가함에 따라 군지연과 비선형에 의한 영향은 증가하며, 군지연의 선형 성분과 비선형의 AM-AM 성분이 시스템 성능 열화에 지배적으로 작용하는 것을 알 수 있었다. 고속 데이터에 따른 광대역 전송 대역폭으로 낮은 군지연과 이득 평탄도를 얻기가 어려우므로 주로 열화 요소를 등화하여 넓은 범위의 초고속 위성통신 서비스에 효과적으로 제공하여야 한다. 분석된 결과는 통신해양기상위성을 이용한 최적의 고속 위성전송 시스템을 설계하고 운용하는데 활용될 수 있다.
본 논문에서는 X-대역 능동 위상 배열 레이더 시스템에 사용되는 MMIC 다기능 칩을 0.5 ${\mu}m$ p-HEMT 상용 공정을 이용하여 저전력 특성을 가지도록 개발하였다. 다기능 칩은 6-비트 디지털 위상 천이 기능, 6-비트 디지털 감쇠 기능, 송/수신 모드 선택 기능, 신호 증폭 기능 등의 다양한 기능을 제공한다. $16mm^2(4mm{\times}4mm)$ 칩 크기의 소형으로 제작된 MMIC 다기능 칩은 7~11 GHz에서 10 dB의 송/수신 이득 특성과 14 dBm의 P1dB 특성을 가지며, DC 소모 전력이 0.6 W로 매우 낮은 저전력 특성을 보였다. 그리고 6-비트, 64 상태에 대해 위상 천이 특성과 감쇠 특성의 측정 결과, 동작 주파수에서 $3^{\circ}$의 RMS(Root Mean Square) 위상 오차와 0.6 dB의 RMS 감쇠 오차를 보였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.