• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(1)
• /
• pp.423-426
• /
• 2002

Undoped-GaN thin film is deposited on Sapphire substrate by MOCVD. SAW velocity is measured with tile center frequency by HP8753C. Center frequency is 266.52 MHz and SAW velocity is 5330㎧ when wavelength was 20 Um. insertion loss, Q factor and side love attenuation is 41.265 dB, 257.41 and over 23 dB. k'i is calculated from tile measured data. k2'is from 1 % to 4 %. TCF is -61.817pp/m/$^{\circ}C$.

• 한국결정성장학회지
• /
• 제26권2호
• /
• pp.58-61
• /
• 2016

Basic 암모노써멀 방법을 사용하여 벌크 GaN 단결정을 성장시켰다. 종자 결정은 Hydride vapor phase epitaxy법으로 성장한 c면의 GaN 템플릿을 사용하고 광화제는 sodium metal, amide, azide를 사용하였다. 결정 성장 온도는 $500{\sim}600^{\circ}C$, 성장 압력은 2~3 kabr에서 실시하였다. c 축의 결정 성장 속도는 운용 압력이 증가함에 따라 선형적으로 증가하였다. Cathodoluminescence로 측정한 평균 전위 밀도는 $1{\times}10^5/cm^2$였다. Double Crystals X-ray Diffraction로 측정한 (002)면의 반치폭은 Ga 면에 대해서는 약 270 arcsec, N 면에 대해서는 약 80 arcsec이었다.

• Bulletin of the Korean Chemical Society
• /
• 제22권2호
• /
• pp.154-158
• /
• 2001

The steps for the generation of very thin GaN films on ultrathin AlN/6H-SiC surface by alternating a pulsative supply (APS) of trimethyl gallium and NH3 gases have been examined by ASED-MO calculations. We postulate that the gallium cul ster was formed with the evaporation of CH4 gases via the decomposition of trimethyl gallium (TMG), dimethyl gallium (DMG), and monomethyl galluim (MMG). During the injection of NH3 gas into the reactor, the atomic hydrogens were produced from the thermal decomposition of NH3 molecule. These hydrogen gases activated the Ga-C bond cleavage. An energetically stable GaN nucleation site was formed via nitrogen incorporation into the layer of gallium cluster. The nitrogen atoms produced from the thermal degradation of NH3 were expected to incorporate into the edge of the gallium cluster since the galliums bind weakly to each other (0.19 eV). The structure was stabilized by 2.08 eV, as an adsorbed N atom incorporated into a tetrahedral site of the Ga cluster. This suggests that the adhesion of the initial layer can be reinforced by the incorporation of nitrogen atom through the formation of large grain boundary GaN crystals at the early stage of GaN film growth.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.48-48
• /
• 2007

P-type transparent conducting $CuGaO_2$ thin films have been prepared by DC/RF sputtering using Quartz(0001) and sapphire(0001) substrates. The target was fabricated by heating a stoichiometric mixture of CuO and $Ga_2O_3$ at 1373K for 12h under $N_2$ atmosphere. The film were deposited under mixture gas of Ar and $O_2(Ar:O_2=4:1)$ during 10~30min. and the as-deposited films were annealed at 1123K and $N_2$ atmosphere. Room temperature conductivity and the activation energy of the sintered body in the temperature range of 223K ~ 423K were 0 004S/cm, 1.9eV, respectively. XRD revealed that all of the as-deposited films were amorphous. Heating of the films deposited on Quartz substrates above 1123K resulted in crystallization with a second phase of $CuSiO_3$, which was assumed owing to reaction with Quartz substrate. The single phase of $CuGaO_2$ was obtained at the film deposited on the sapphire substrates. The transmittance after annealing of DC- and RF-sputtered films were 55~75% at 550nm. From the transmittance and reflectance measurement. the direct band gap of the DC/RF-sputtered films were 3.63eV and 3.57eV. and there was little difference between DC and RF sputtered films.

• 한국재료학회지
• /
• 제12권2호
• /
• pp.112-116
• /
• 2002

• 한국전기전자재료학회논문지
• /
• 제22권12호
• /
• pp.1045-1057
• /
• 2009

The authors investigated the InGaN/GaN multi-quantum well blue light emitting devices with the implementation of the photonic crystals fabricated at the top surface of p-GaN layer and the bottom interface of n-GaN layer. The top photonic crystals result in the lattice-dependent photoluminescence spectra at the wavelength of 450 nm and however, the bottom photonic crystal shows a big shift of the photoluminescence peak from 444 nm to 394 nm. The sample with the bottom photonic crystal structure also shows the lasing effect at the wavelength of 468 nm. Furthermore, the quality enhancement for the crystal growth of GaN thin film on the bottom photonic crystal comes from the modulated compressive stress which was measured by the micro-Raman spectroscopy.

• Transactions on Electrical and Electronic Materials
• /
• 제11권1호
• /
• pp.37-41
• /
• 2010

The authors investigated the photoluminescence (PL) and the electron paramagnetic resonance (EPR) from an magnesium (Mg)-doped GaN thin film with a delta-doped layer. The regularly doped sample shows a PL peak at 2.776 eV for the as-grown sample, and the peak shifts to 2.904 eV and increases in intensity for the annealed sample. The delta-doped sample also shows the same PL peak as does the regularly doped sample. However, only the annealed delta-doped layer shows a sharp EPR with a small isotropic Lande g-factor, $g_{II}$, of 2.029. This resonance is attributed to the delta-doped layer, which forms a hole-bound Mg-N atomic structure instead of the $Mg_{Ga}-V_N$ defect complex, indicating that the delta-doped sample was not optically activated to form PL centers but was instead electrically activated to form a hole-bound state.

• 한국진공학회지
• /
• 제10권3호
• /
• pp.335-340
• /
• 2001

RF마그네트론 스퍼터링법으로 사파이어 기판 위에 Ga을 1 wt% 첨가한 ZnO 박막(GZO)을 기판온도 $550^{\circ}C$에서 성장시켜 다결정 박막을 제조하였다. 이러한 박막은 불충분한 전기적 특성이나 PL(Photoluminescence) 특성을 보이고 있다. 이러한 전하농도, 이동도 그리고 PL특성 등과 같은 전기적 광학적 특성을 향상시키고자 질소분위기하에서 RTA(Rapid Thermal Annealing) 법으로 $800^{\circ}C$와 $900^{\circ}C$에서 각각 3분씩 후열처리 하였다. RTA법으로 후열처리한 GZO박막의 비저항은 $2.6\times10^{-4}\Omega$/cm 였으며 전자농도와 이동도는 각각 $3.9\times10^{20}/\textrm{cm}^3$과 60 $\textrm{cm}^2$/V.s 였다. 이러한 물리적 성질들의 향상은 열처리시 원자 크기가 비슷한 도핑된 Ga 원자들이 일부 휘발되는 Zn 빈자리로 치환하면서 침입자리 보다는 치환자리로의 전이에 기인한 것으로 생각된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.100-101
• /
• 2008

To obtain the single crystal thin films, $CuGaSe_2$ mixed crystal was deposited on thoroughly etched semi-insulating GaAs(100) substrate by the hot wall epitaxy (HWE) system. The source and substrate temperatures were $610^{\circ}C$ and $450^{\circ}C$, respectively. After the as-grown $CuGaSe_2$ single crystal thin films was annealed in Cu-, Se-, and Ga-atmospheres, the origin of point defects of $CuGaSe_2$ single crystal thin films has been investigated by the photoluminescence(PL) at 10 K. The native defects of $V_{CU}$, $V_{Se}$, $Cu_{int}$, and $Se_{int}$ obtained by PL measurements were classified as a donors or acceptors type. And we concluded that the heat-treatment in the Cu-atmosphere converted $CuGaSe_2$ single crystal thin films to an optical n-type. Also, we confirmed that Ga in $CuGaSe_2$/GaAs did not form the native defects because Ga in $CuGaSe_2$ single crystal thin films existed in the form of stable bonds.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.566-569
• /
• 2001

In this paper, we investigated the electrical characteristics through DC power at manufacturing the MIS capacitor insulator AIN thin film based on reactive sputtering method. In case of deposition temperature 250$^{\circ}C$, pressure 5mTorr, total flow rate 8sccm(Ar:4sccm N2:4sccm), AIN thin film was deposited with changing DC power. As DC power increses, resistivity is observed a little increase. When AIN thin film is deposited at 100W, the result shows leakage current 10$\^$-8/A/$\textrm{cm}^2$ at 0.1MV/cm. Otherwise, In case of depositing at 150W and 200W, the result shows that the characteristic of leakage current is under 10$\^$-9//$\textrm{cm}^2$ at 0.1MV/cm. In C-V characteristic with DC power, deep depletion phenomenon is observed at inversion region in 100W and 150W. In 200W, that phenomenon, however, was showed to decrease. It shows that the hysterisis increases with being increasing DC power.