• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.24 no.4
• /
• pp.145-150
• /
• 2014

GaN nanorods were grown on the apex of GaN stripes by three dimensional selective growth method. $SiO_2$ mask was partially removed only on the apex area of the GaN stripes by an optimized photolithography for the selective growth. Metallic Au was deposited only on the apex of the GaN stripes and a selective growth of GaN nanorods was followed by a metal organic vapor phase epitaxy (MOVPE). We confirmed that the shape and size of the GaN nanorods depend on growth temperature and flow rates of group III precursor. GaN nanorods were grown having a taper shape which have sharp tip and triangle-shaped cross section. From the TEM result, we confirmed that threading dislocations were rarely observed in GaN nanorods because of the very small contact area for the selective growth. Stacking faults which might be originated from a difference of the crystal facet directions between the GaN stripe and the GaN nanorods were observed in the center area of the GaN nanorods.

• 전자공학회논문지 IE
• /
• v.48 no.2
• /
• pp.1-5
• /
• 2011

The epitaxial GaN layer of $120{\mu}m$ ~ $300{\mu}m$ thickness with a stripe Ti mask pattern is performed by hydride vapor phase epitaxy(HVPE). Ti strpie mask pattern is deposited by DC magnetron sputter on GaN epitaxial layer of $3{\mu}m$ thickness is grown by hydride vapor phase epitaxy(HVPE). Void are observed at point of Ti mask pattern when GaN layer is investigated by scanning electron microscope. The Crack of GaN layer is observed according to void when it is grown more thick GaN layer. The full width at half maximum of peak which is measured by X-ray diffraction is about 188 arcsec. It is not affected its crystallization by Ti meterial when GaN layer is overgrown on Ti stripe mask pattern according as it is measure FWHM of overgrowth GaN using Ti material against FWHM of first growth GaN epitaxial layer.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.19 no.1
• /
• pp.1-5
• /
• 2009

In this study, we performed growth of InGaN/GaN multi quantum well (MQW) structures on semi-polar (1-10]) GaN facet on 8-degree off oriented stripe patterned (100) Si substratcs by MOVPE. The structural and optical properties of the InGaN/GaN multi quantum well (MQW) structures grown on (1-101) GaN stripe depend on $NH_3$ flow rate, TMI flow rate and growth temperature are characterized by cathodoluminescence (CL) and scanning electron microscopy (SEM). With the decrease of $NH_3$ flow rate, the threading dislocation of (1-101) GaN is considerably reduced. We could control the transition wavelength of InGaN/GaN MQW structures from 391.5 nm to 541.2 nm depend on the growth conditions.

• Korean Journal of Materials Research
• /
• v.9 no.3
• /
• pp.257-262
• /
• 1999

The selective area growth of GaN by metal organic chemical vapor deposition has been carried out on GaN/ sapphire substrate using $SiO_2$ mask. We investgated the effect of growth parameters such as flow rate of $NH_3$(500­~1300sccm) and the growth temperature(TEX>$950~1060^{\circ}C$) on the growth selectivity and characteristics of GaN using the Scanning Electron Microscopy(SEM). The selectivity of GaN improved as flow rate of NH, and growth temperature in­creased. But the grown GaN shapes on the substrate windows was independent of the flow rate of $NH_3$. On the pattern shapes such as circle, stripe, and radiational pattern(rotate the stripe pattern by $30^{\circ}, 45^{\circ}$), we observed the hexagonal pyramid, the lateral over growth on the mask layer, and the difference of the lateral growth rate depending on growth condition.

• Journal of Ceramic Processing Research
• /
• v.13 no.spc1
• /
• pp.93-95
• /
• 2012

We report on the growth and characterization of the nano- and micro scale GaN structures selectively grown on the vertex of GaN stripes using the metal organic vapor phase epitaxy method and conventional photolithography technique. The triangular shaped nano- and micro GaN structures which have semi-polar {11-22} facets were formed only on the vertex of the lower GaN stripes. Crystalline defects reduction was observed by transmission electron microscopy for upper GaN stripes. We also have grown the InGaN/GaN multi-quantum well structures on the semi-polar facets of the upper GaN stripes. Cathodoluminescence images were taken at 366, 412 and 555 nm related to GaN band edge, InGaN/GaN layer and defects, respectively.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.2
• /
• pp.168-172
• /
• 1999

The 9 $\mu\textrm{m}$ GaN films on sapphire substrate were grown by Hydride vapor phase epitaxy. Dislocation density of these GaN films was measured by TEM. GaN film with crack free and mirror surface was directly grown on sapphire substrate. The dislocation density of this GaN film was $2{\times}10^9/cm^2$. The surface of GaN film on patterned GaN layer also presented a smooth mirror. But a part of GaN surface included holes because of incomplete coalescence. The dislocation density of GaN film above the mask region was lower than that in the window region. Especially, the dislocation density in the region between mask center and window region was close to dislocation free. The average dislocation density of ELO GaN was $8{\times}10^7/cm^2$.

• Journal of the Semiconductor & Display Technology
• /
• v.10 no.3
• /
• pp.29-33
• /
• 2011

Film growth rate and composition variation are numerically analyzed during the selective area growth of InGaN on the GaN triangular stripe microfacet in this study. Both the vapor phase diffusion and the surface diffusion are considered to determine the In composition on the InGaN surface. To obtain the In composition on the surface, flux of In atoms due to the surface diffusion is added to the concentration determined from the Laplace equation which is governing the gas phase diffusion. The solution model is validated by comparing the growth rates from the analyses to the experimental results of GaN and InN films. The In composition and resulting wave length are increased when the surface diffusion is considered. The In content is also increased according to the increasing mask width. The effect of mask width to the In content and wave length is increasing in the case of a small open region.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.6 no.3
• /
• pp.199-205
• /
• 2006

Patterned sapphire substrates (PSS) were fabricated by a simple wet etching process with $SiO_2$ stripe masks and a mixed solution of $H_2SO_4$ and $H_3PO_4$. GaN layers were epitaxially grown on the PSS under the optimized 2-step growth condition of metalorganic vapor deposition. During the 1st growth step, GaN layers with triangular cross sections were grown on the selected area of the surface of the PSS, and in the 2nd growth step, the GaN layers were laterally grown and coalesced with neighboring GaN layers. The density of threading dislocations on the surface of the coalesced GaN layer was $2{\sim}4\;{\times}\;10^7\;cm^{-2}$ over the entire region. The epitaxial structure of near-UV light emitting diode (LED) was grown over the GaN layers on the PSS. The internal quantum efficiency and the extraction efficiency of the LED structure grown on the PSS were remarkably increased when compared to the conventional LED structure grown on the flat sapphire substrate. The reduction in TD density and the decrease in the number of times of total internal reflections of the light flux are mainly attributed due to high level of scattering on the PSS.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.04a
• /
• pp.189-192
• /
• 2003

V-grooved inner stripe (VIS)형 양자선 레이저의 전류 주입 효율을 높이기 위하여 세가지 서로 다른 전류 차단층 구조, n-blocking on p-substrate (VIPS), p-n-p-n blocking on n-substrate ($VI(PN)_{n}S$), p-blocking on n-substrate (VINS)를 설계, 제작하였다. 그 중 VIPS 구조는 다른 두 구조에 비하여 약 5mW/facet 정도의 높은 광출력을 보였으며, 중심파장 818 nm, 문턱전류 39.9 mA, 외부양자효과 24%/facet, 특성온도 92K의 특성을 보였다. 또한 전류 및 온도 변화에 따른 파장변화를 각각 0.031 nm/mA와 $0.14nm/^{\circ}C$로 관찰되었다.

• Applied Science and Convergence Technology
• /
• v.26 no.4
• /
• pp.79-85
• /
• 2017

The crack-free AlGaN template has been successfully grown by using selective area growth with triangular GaN facet. The triangular GaN stripe structure was obtained by vertical growth rate enhanced mode with low growth temperature of $950^{\circ}C$ and high growth pressure of 500 torr. The lateral growth rate enhanced mode of AlGaN for crack-free and flat surface was also investigated. Low pressure of 30 torr and high V/III ratio of 4400 were favorable for lateral growth of AlGaN. It was confirmed that the $4{\mu}m$ -thick $Al_{0.2}Ga_{0.8}N$ was crack-free over entire 2-inch wafer. The dislocation density of $Al_{0.2}Ga_{0.8}N$ was as low as ${\sim}7.6{\times}10^8/cm^2$ measured by cathodoluminescence. Based on the high quality AlGaN with low dislocation density, the ultraviolet laser diode epitaxy with cladding, waveguide and GaN/AlGaN multiple quantum well (MQW) was grown by metalorganic chemical vapor deposition. The stimulated emission at 349 nm with full width at half maximum of 1.8 nm from the MQW was observed through optical pumping experiment with 193 nm KrF laser. We also have fabricated the deep ridge type ultraviolet laser diode (UV-LD) with $5{\mu}m-wide$ and $700{\mu}m-long$ cavity for electrical properties. The turn on voltage was below 5 V and the resistance was ${\sim}55{\Omega}$ at applied voltage of 10 V. The amplified spontaneous emission spectrum of UV-LD was also observed from pulsed current injection.