• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.2
• /
• pp.221-225
• /
• 2016

This paper reports a new method to enable the normally-off operation of AlGaN/GaN heterojunction field-effect transistors (HFETs). A capacitor was connected to the gate input node of a normally-on AlGaN/GaN HFET with a Schottky gate where the Schottky gate acted as a clamping diode. The combination of the capacitor and Schottky gate functioned as a clamp circuit to downshift the input signal to enable the normally-off operation. The normally-off operation with a virtual threshold voltage of 5.3 V was successfully demonstrated with excellent dynamic switching characteristics.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.7
• /
• pp.533-538
• /
• 2001

The barrier height is found to increase from 0.25 to 0.690 eV for Schottky contacts on n-InGaAs using deposition of Ag on a substrate cooled to 77K(LT). Surface analysis leads to an interface model for the LT diode in which there are oxide compounds of In:O and As:O between the metal and semiconductor, leading to behavior as a metal-insulator-semiconductor diode. The metal film deposited t LT has a finer and more uniform structure, as revealed by scanning electron microscopy and in situ metal layer resistance measurement. This increased uniformity is an additional reason for the barrier height improvement. In contrast, the diodes formed at room temperature exhibit poorer performance due to an unpassivated surface and non-uniform metal coverage on a microscopic level.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.04b
• /
• pp.21-22
• /
• 2009

We proposed circular AlGaN/GaN schottky barrier diode, which has no mesa structure near the current path. Proposed device showed low leakage current of 10 nA/mm at -100 V while that of the rectangular device was 34 nA/mm at the same condition. Proposed circular AlGaN/GaN SBD showed high forward current of 88.61 mA at 3.5 V while that of the conventional device was 14.1 mA at the same condition.

• Journal of Sensor Science and Technology
• /
• v.12 no.2
• /
• pp.66-71
• /
• 2003

Pt/AlGaN Schottky-type UV photodetectors were designed and fabricated. A low-temperature AlGaN interlayer buffer was grown between the AlGaN and GaN film in the diode structure epitaxy to obtain crack-free AlGaN active layers. A comparison was then made of the structural, electrical, and optical characteristics of two different diodes: one with an AlGaN($0.5\;{\mu}m$)/n+-GaN(2 nm) structure (type 1) and the other with an AlGaN($0.5\;{\mu}m$)/AlGaN interlayer($150\;{\AA}$)/n+-GaN($3\;{\mu}m$) structure(type 2). A crack-free AlGaN film was obtained by the insertion of a low-temperature AlGaN interlayer with an aluminum mole fraction of 26% into the $Al_xGa_{1-x}N$ layer. The fabricated Pt/$Al_{0.33}Ga_{0.67}N$ photodetector had a leakage current of 1 nA for the type 1 diode and $0.1\;{\mu}A$ for the type 2 diode at a reverse bias of -5 V. For the photoresponse measurement, the type 2 diode exhibited a cut-off wavelength of 300 nm, prominent responsivity of 0.15 A/W at 280 nm, and UV-visible extinction ratio of $1.5{\times}10^4$. Accordingly, the Pt/$Al_{0.33}Ga_{0.67}N$ Schottky-type ultraviolet photodetector with an AlGaN interlayer exhibited superior electrical and optical characteristics and improved UV detecting properties.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2002.11a
• /
• pp.85-90
• /
• 2002

$RuO_2$/GaN and related contacts were investigated for Schottky contacts in GaN-Based optical and electronic devices. We demonstrated that an $RuO_2$ film forms a stable Schottky contact on a GaN layer with a barrier height (${\Phi}_B$) of 1.46 eV and transmittance of 70% in the visible and near UV region. $RuO_2$/GaN Schottky diode showed a breakdown at over -50V and leakage current of only 0.3 nA at -5V. The $RuO_2$/GaN Schottky type photodetector had the UV/Visible rejection ratio of over $10^5$ and the responsivity of 0.23 A/W at 330 nm. The $RuO_2$ gate AlGaN/GaN EFET exhibited high drain current ($I_d$) of 689.3 mA/mm and high transconductance ($g_m$) of 197.4 mS/mm. Cut-Off frequency ($f_t$) and maximum operating frequency ($f_{max}$) were measured as 27.0 GHz and 45.5 GHz, respectively.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2002.11a
• /
• pp.79-79
• /
• 2002

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.2
• /
• pp.14-19
• /
• 2011

We have fabricated GaN Schottky barrier diode (SBD) for high-voltage applications on Si substrate. The leakage current and the electrical characteristics of GaN SBD are investigated by annealing metal-semiconductor junctions. Ohmic junctions of Ti/Al/Mo/Au and Schottky junctions of Ni/Au are used in the fabrication. A test structure is proposed to measured buffer leakage current through a mesa structure. When annealing temperature is increased from $700^{\circ}C$ to $800^{\circ}C$, measured buffer leakage current is also increased from 87 nA to 780 nA at the width of 100 ${\mu}m$. The diffusion of Au, Ti, Mo, O into GaN buffer layer increases the leakage current and that is verified by Auger electron spectroscopy. Experimental results show that the low leakage current and the high breakdown voltage of GaN SBD are achieved by annealing metal-semiconductor junctions.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.7
• /
• pp.486-493
• /
• 2003

Schottky type A $l_{0.33}$G $a_{0.67}$N ultraviolet photodetectors were fabricated on the MOCVD grown AlGaN/ $n^{＋}$-GaN and AlGaN/AlGaN interlayer/ $n^{＋}$-GaN structures. The grown layers have the carrier concentrations of -$10^{18}$, and the mobilities were 236 and 269 $\textrm{cm}^2$/V.s, respectively. After mesa etching by ICP etching system, the Si3N4 layer was deposited for passivation between the contacts and Ti/AL/Ni/Au and Pt were deposited for ohmic and Schottky contact, respectively. The fabricated Pt/A $l_{0.33}$G $a_{0.67}$N Schottky diode revealed a leakage current of 1 nA for samples with interlayer and 0.1$\mu\textrm{A}$ for samples without interlayer at a reverse bias of -5 V. In optical measurement, the Pt/A $l_{0.33}$G $a_{0.67}$N diode with interlayer showed a cut-off wavelength of 300 nm, a prominent responsivity of 0.15 A/W at 280 nm and a UV-visible extinction ratio of 1.5x$10^4./TEX>.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.417-420
• /
• 2004

The electrical effects of dry-etch on n-type GaN by an inductively coupled $Cl_2/CH_4/H_2/Ar$ plasma were investigated as a function of ion energy, by means of ohmic and Schottky metallization method. The specific contact resistivity(${\rho}_c$) of ohmic contact was decreased, while the leakage current in Schottky diode was increased with increasing ion energy due to the preferential sputtering of nitrogen. At a higher rf power, an additional effect of damage was found on the etched sample, which was sensitive to the dopant concentration in terms of the ${\rho}_c$ of ohmic contact. This was attributed to the effects such as the formation of deep acceptor as well as the electron-enriched surface layer within the depletion layer. Furthermore, thermal annealing process enhanced the ohmic and Schottky property of heavily damaged surface.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.6
• /
• pp.471-476
• /
• 2003

Au/oxide/n-InP Schottky diodes were fabricated from heteroepitaxial InP layers grown on GaAs substrates by the metalorganic vapor phase epitaxy (MOVPE) method from a new combination of source materials: ethyldimethylindium (EDMIn) and tertiarybutylphosphine (TBP). Anodic oxidation technique by using a solution of 10 g of ammonium pentaborate in 100 cc of ethylene glycole as the electrolyte was used to deposit a thin oxide layer. The barrier heights determined from three different techniques, current-voltage (I-V) measurements at room temperature and in the temperature range of 273 K - 373 K, and room temperature capacitance-voltage (C-V) measurements are in good agreement, 0.7 - 0.9 eV which is considerably high as compared to the 0.45 - 0.55 eV in Au/n-InP Schottky diode without a Passivation layer. The ideality factors of 1.1 - 1.3 of the Schottky diodes were also determined from the I-Y characteristics. Deep level transient spectroscopy (DLTS) studies revealed only one shallow electron state at 92.6 meV below the bottom of the conduction band and no deep state in the heteroepitaxial InP layers grown from EDMIn and TBP.