• Proceedings of the Materials Research Society of Korea Conference
• /
• 2005.05a
• /
• pp.181-181
• /
• 2005

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.14 no.1
• /
• pp.33-36
• /
• 2004

Amorphous GaN film was deposited using a laser ablation of the highly densified GaN target. Through the surface morphological and compositional analysis of films deposited under various laser energies and Ar gas pressures, the film deposited under the pressure of 10 Pa were found to be amorphous GaN with the smooth surface. In particular, the film at 200 mJ/pulse showed the enhanced crystallinity and stoichiometric composition, compared with those of the films at relatively lower laser energy. The strong band-gap emission at 2.8 eV was observed from amorphous GaN film in the room temperature photoluminescence spectra, showing the highest efficiency in the film at 200 mJ/pulse under 10 Pa.

• Journal of the Korean Vacuum Society
• /
• v.10 no.3
• /
• pp.350-355
• /
• 2001

We have investigated characteristics of ZnSe epilayer grown by molecular beam epitaxy(MBE) on semi-insulating(SI) GaAs by using surface photovoltage(SPV). The measurements of SPV were performed with illumination intensity and modulation frequency. The bandgap energy of ZnSe epilayer was determined from derivative surface photovoltage (DSPV). The five states were observed at room temperature(RT), and those states relate to the impurity and defect formed hetero-interface of ZnSe and GaAs during the sample growth. The observed states represented as a tendency of typical extrinsic transition on the increasing illumination intensity. The 1s and 2s signals related to the excitonic absorption were not observed at RT, but those were presented with the splitted of two peaks in the SPV at 80 K. From the modulation frequency dependence, we obtained the junction conductance and capacitance of the sample.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.3
• /
• pp.366-376
• /
• 1997

$CdGa_2Se_4$, epilayer of tetragonal type are grown on Si(100) substrate by hot wall epitaxy method. The source and substrate temperature is $580^{\circ}C$ and $420^{\circ}C$ respectively, and the thickness of the film is 3 $\mu \textrm{m}$. The crystallihe structure of epilayers were investigated by double crystal X-ray diffraction(DCXD). Hall effect on this sample was measured by the method of van der Pauw and studied on carrier density and mobility depending on temperature. From Hall data, the mobility was likely to be decreased by pizoelectric scattering in the temperature range 30 K to 200 K and by polar optical scattering in the temperature range 200 K to 293 K. In order to explore of photocurrent to darkcurrent (pc/dc), maximum allowable power dissipation (MAPD), spectral response and response time. The results indicated that for the samples annealed in Se vapor the photoconductive characteristics are best. Then we obtained the sensitivity of 0.98, the value of pc/dc of $9.62{\times}10^6$, the MAPD of 321 ㎽ and the rise and decay time of 9 ㎳ and 9.5 ㎳, respectively.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.326-329
• /
• 2016

2차원 metal monochalchogenides(MMC) 물질들 중 lattice mismatch가 가장 적은 GaSe와 InS의 $8{\times}1$ lateral heterostructure의 계면 원자 구조와 전자 구조를 Linear combination of atomic orbital 제일원리계산을 이용하여 연구하였다. Arm-chair 와 zigzag 계면에 대해 각각 두 가지 원자 구조를 고려하여 총 네 가지 계면 구조 모델을 정립하고, 각각의 계면에 대해 GaSe-InS의 비율을 다섯 단계(2:6, 3:5, 4:4, 5:3, 6:2)로 바꾸어 가며 relax된 원자구조의 특성과 계면 형성 에너지를 구하였다. 또한, 계면 전자구조 분석을 위하여, 계면으로부터의 위치에 따른 projected density of states의 변화를 규명하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.185-188
• /
• 2005

나노 입자 분무 기법을 이용한 $Cu(In,\;Ga)Se_2$ (CIGS) 광흡수층 제조 기법은 고진공 장치를 사용하지 않는다는 점에서 대면적 저가형 CIGS 태양전지 양산에 적합한 차세대 기술로 인식되고 있다. 그러나 일반적으로 스프레이 된 상태의 CIGS충 자체는 태양전지 제조에 적합하지 않은데 이는 스프레이 막의 다공성 구조 때문이다. 본 연구에서는 나노입자 분무 기법을 이용하여 증착한 CIGS 광흡수층막을 질소 또는 셀레늄 분위기에서 열처리함으로써 태양전지 제조에 적합한 치밀한 구조의 CIGS 광흡수충을 제조하고자 하였다. 실험 결과, 질소 분위기 $500^{\circ}C$의 온도에서 1시간 열처리하여도 CIGS 나노 입자의 성장은 거의 일어나지 않는 것으로 나타났다. 반면 셀레늄 분위기 $500^{\circ}C$의 온도에서 30분 열처리시 입자 크기가 $1{\mu}m$이상인 치밀한 광흡수층을 얻을 수 있었다. 본 결과는 CIGS 나노 입자의 입자 성장 반응에서 열에너지 단독에 의한 표면 에너지 감소 효과는 미미하며 셀레늄 증기의 역할이 더욱 크다는 것을 의미하는 것이다.

• Journal of the Korean Vacuum Society
• /
• v.10 no.2
• /
• pp.252-256
• /
• 2001

We performed spectroscopic ellipsometry measurement to obtain dielectric function(DF) of ZnSe at room temperature. Proper wet chemical etching procedure was carried out to remove overlayers on top of ZnSe, and our result indicates that the previous reports on the pure DF of ZnSe have inaccurate interpretations. We constructed DF of oxide on ZnSe by using reported DFs of amorphous-Se, $GaAsO_3$, and voids through Bruggeman effective-medium approximation.

• Korean Journal of Materials Research
• /
• v.22 no.5
• /
• pp.259-273
• /
• 2012

Chalcogenide-based semiconductors, such as $CuInSe_2$, $CuGaSe_2$, Cu(In,Ga)$Se_2$ (CIGS), and CdTe have attracted considerable interest as efficient materials in thin film solar cells (TFSCs). Currently, CIGS and CdTe TFSCs have demonstrated the highest power conversion efficiency (PCE) of over 11% in module production. However, commercialized CIGS and CdTe TFSCs have some limitations due to the scarcity of In, Ga, and Te and the environmental issues associated with Cd and Se. Recently, kesterite CZTS, which is one of the In- and Ga- free absorber materials, has been attracted considerable attention as a new candidate for use as an absorber material in thin film solar cells. The CZTS-based absorber material has outstanding characteristics such as band gap energy of 1.0 eV to 1.5 eV, high absorption coefficient on the order of $10^4cm^{-1}$, and high theoretical conversion efficiency of 32.2% in thin film solar cells. Despite these promising characteristics, research into CZTS-based thin film solar cells is still incomprehensive and related reports are quite few compared to those for CIGS thin film solar cells, which show high efficiency of over 20%. The recent development of kesterite-based CZTS thin film solar cells is summarized in this work. The new challenges for enhanced performance in CZTS thin films are examined and prospective issues are addressed as well.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.427-427
• /
• 2012

Cu(In,Ga)$Se_2 $ (CIGS) 박막 태양전지는 높은 효율과 낮은 생산 단가로 인해 많은 연구가 이루어지고 있다. 특히, Se flux는 박막의 특성에 가장 중요한 CIGS의 결정성, 결정립 크기, 결정방향을 형성하는데 영향을 주는 것으로 알려져 있다. 일반적인 co-evaporation에 사용되는 Se effusion cell의 경우, 높은 분자가를 가지는 Se 분자들이 공급되기 때문에 낮은 반응성을 보이지만 Se cracker cell을 사용할 경우 Se 분자들이 열적으로 크래킹되어 낮은 분자가를 가지므로 화학적으로 높은 반응성을 가진다. 따라서 적은 양의 Se으로도 양질의 CIGS 박막 제작이 가능하다. 본 연구에서는 Se effusion cell과 cracker cell을 이용하여 CIGS 광흡수층을 제작하였으며, 각각 제작된 CIGS 박막의 특성을 비교하였다. 또한 Se cracker cell의 reservoir zone(R-zone) 온도를 통해 Se flux를 변화시켜 Se flux에 따른 CIGS 박막 태양전지의 특성에 대해 알아보았다. SEM, EDS, XRD 측정을 통해 박막의 특성을 분석하였고, J-V 측정을 통해 태양전지의 특성에 대해 알아보았다. Se cracker를 사용하여 제작된 CIGS 박막의 결정립 크기가 effusion cell로 제작된 박막보다 더 크게 나타났고, Se flux가 증가할수록 결정립의 크기는 증가하였다. Se cracker의 flux가 $0.17{\'{{\AA}}}$/s일 때 반사방지막 없이 13.14%의 효율을 나타내었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.99.1-99.1
• /
• 2010

Many efforts on the surface sulfurization of $Cu(InGa)Se_2$ (CIGS)thin films have been reported as techniques to improve CIGS solar cell performance. We have investigated the sulfurization technique using the sulfur vapor. The co-evaporated $Cu(In,Ga)Se_2$ tin film was used for sulfurization. A thin $Cu(In,Ga)(S,Se)_2$ layer was grown on the surface of the CIGS thin film after high-temperature annealing in sulfur vapor. The structural and compositional properties of the thin films were studied by XRD, EDS and AES analysis. The obtained results revealed that the surface modification technique is promising method to S incorporated into CIGS absorber.