• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.5
• /
• pp.50-60
• /
• 2010

For the last half a century, the personal computer and software industries have been prosperous due to the incessant evolution of computer systems. In the 21st century, the embedded system market has greatly increased as the market shifted to the mobile gadget field. While a lot of multimedia gadgets such as mobile phone, navigation system, PMP, etc. are pouring into the market, most industrial control systems still rely on 8-bit micro-controllers and simple application software techniques. Unfortunately, the technological barrier which requires additional investment and higher quality manpower to overcome, and the business risks which come from the uncertainty of the market growth and the competitiveness of the resulting products have prevented the companies in the industry from taking advantage of such fancy technologies. However, high performance, low-power and low-cost hardware and software platforms will enable their high-technology products to be developed and recognized by potential clients in the future. This paper presents such a platform for industrial embedded systems. The platform was designed based on Telechips TCC8300 multimedia processor which embedded a variety of parallel hardware for the implementation of multimedia functions. And open-source Embedded Linux, TinyX and GTK+ are used for implementation of GUI to minimize technology costs. In order to estimate the expected performance and power consumption, the performance improvement and the power consumption due to each of enabled hardware sub-systems including YUV2RGB frame converter are measured. An analytic model was devised to check the feasibility of a new application and trade off its performance and power consumption. The validity of the model has been confirmed by implementing a real target system. The cost can be further mitigated by using the hardware parts which are being used for mass production products mostly in the cell-phone market.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.1C
• /
• pp.21-35
• /
• 2002

Nowadays, in accordance with increasing expectations of multimedia stream service on the internet, a lot of distributed applications are being required and developed. But the models of the existing systems have the problems that cannot support the extensibility and the reusability, when the QoS relating functions are being developed as an integrated modules which are suited on the centralized controlled specific-purpose application services. To cope with these problems, it is suggested in this paper to a distributed QoS management system on CORBA, an object-oriented middleware compliance. This systems we suggested can provides not only for efficient control of resources, various service QoS, and QoS control functions as the existing functions, but also QoS control real-time negotiation and dynamic adaptation in addition. This system consists of QoS Control Management Module(QoS CMM) in client side and QoS Management Module(QoS MM) in server side, respectively. These distributed modules are interfacing with each other via CORBA on different systems for distributed QoS management while serving distributed streaming applications. In phase of design of our system, we use UML(Unified Modeling Language) for designing each component in modules, their method calls and various detailed functions for controlling QoS of stream services. For implementation of our system, we used OrbixWeb 3.1c following CORBA specification on Solaris 2.5/2.7, Java language, Java Media Framework API 2.0 beta2, Mini-SQL 1.0.16 and the multimedia equipments, such as SunVideoPlus/Sun Video capture board and Sun Camera. Finally, we showed a numerical data controlled by real-time negotiation and adaptation procedures based on QoS map information to GUIs on client and server dynamically, while our distributed QoS management system is executing a given streaming service.

• Journal of KIISE:Computing Practices and Letters
• /
• v.7 no.3
• /
• pp.240-247
• /
• 2001

Java is a promising runtime environment for embedded systems because it has many advantages such as platform independence, high security and support for multi-threading. One of the most famous Java run-time environments, Sun's ($PersonalJave^{TM}$) is based on Truffle architecture, which enables programmers to design various GUIs easily. For this reason, it has been ported to various embedded systems such as set-top boxes and personal digital assistants(PDA's). Basically, Truffle uses heavy-weight window managers such as Microsoft vVin32 API and X-Window. However, those window managers are not adequate for embedded systems because they require a large amount of memory and disk space. To come up with the requirements of embedded systems, we adopt Microwindows as the platform graphic system for Personal] ava A WT onto Embedded Linux. Although Microwindows is a light-weight window manager, it provides as powerful API as traditional window managers. Because Microwindows does not require any support from other graphics systems, it can be easily ported to various platforms. In addition, it is an open source code software. Therefore, we can easily modify and extend it as needed. In this paper, we implement Personal]ava A WT using Microwindows on embedded Linux and prove the efficiency of our approach.

• Journal of Astronomy and Space Sciences
• /
• v.20 no.4
• /
• pp.339-350
• /
• 2003

Engineering qualification model payload for a communications and broadcasting satellite(CBS) was developed by ETRI from May, 2000 to April, 2003. For. the purpose of functional test and verification of the payload, a real-time hardware-in-the-loop(HITL) CBS simulator(CBSSIM) was also developed. We assumed that the spacecraft platform for the CBSSIM is a geostationary communication satellite using momentum bias three-axis stabilization control technique based on Koreasat. The payload hardware is combined with CBSSIM via Power, Command and Telemetry System(PCTS) of Electrical Ground Support Equipment(EGSE). CBSSIM is connected with PCTS by TCP/IP and the payload is combined with PCTS by MIL-STD-1553B protocol and DC harness. This simulator runs under the PC-based simulation environment with Windows 2000 operating system. The satellite commands from the operators are transferred to the payload or bus subsystem models through the real-time process block in the simulator. Design requirements of the CBSSIM are to operate in real-time and generate telemetry. CBSSIM provides various graphic monitoring interfaces and control functions and supports both pre-launch and after-launch of a communication satellite system. In this paper, the HITL simulator system including CBSSIM, communications payload and PCTS as the medium of interface between CBSSIM and communications payload will be described in aspects of the system architecture, spacecraft models, and simulator operation environment.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.3 s.309
• /
• pp.76-83
• /
• 2006

A main objective of audio equalizer is for user to tailor acoustic frequency response to increase sound comfort and example applications of audio equalizer includes large-scale audio system to portable audio such as mobile MP3 player. Up to now, all the audio equalizer requires manual setting to equalize frequency bands to create suitable sound quality for each genre of music. In this paper, we propose an intelligent audio graphic equalizer system that automatically classifies the music genre using music content analysis and then the music sound is boosted with the given frequency gains according to the classified musical genre when playback. In order to reproduce comfort sound, the musical genre is determined based on two-step hierarchical algorithm - coarse-level and fine-level classification. It can prevent annoying sound reproduction due to the sudden change of the equalizer gains at the beginning of the music playback. Each stage of the music classification experiments shows at least 80% of success with complete genre classification and equalizer operation within 2 sec. Simple S/W graphical user interface of 3-band automatic equalizer is implemented using visual C on personal computer.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.3 no.1
• /
• pp.57-72
• /
• 2008

Serve and do so that graft together specialists' view application field of computer and developmental disability diagnosis estimation data to construct developmental disability diagnosis estimation system in this Paper and constructed developmental disability diagnosis estimation system. Developmental disability diagnosis estimation must supply information of specification area that specialists are having continuously. Developmental disability diagnosis estimation specialist system need multimedia data processing that is specialized little more for developmental disability classification diagnosis and decision-making and is atomized for this. Characteristic of developmental disability diagnosis estimation system that study in this paper can supply quick feedback about result, and can reduce mistake on recording and calculation as well as can shorten examination's enforcement time, and background of training is efficient system fairly in terms of nonprofessional who is not many can use easily. But, as well as when multimedia information that is essential data of system construction for developmental disability diagnosis estimation is having various kinds attribute and a person must achieve description about all developmental disability diagnosis estimation informations, great amount of work done is accompanied, technology about equal data can become different according to management. Because of these problems, applied search technology of contents base (Content-based) that search connection information by contents of edit target data for developmental disability diagnosis estimation data processing multimedia data processing technical development. In the meantime, typical access way for conversation style data processing to support fast image search, after draw special quality of data by N-dimension vector, store to database regarding this as value of N dimension and used data structure of Tree techniques to use index structure that search relevant data based on this costs. But, these are not coincided correctly in purpose of developmental disability diagnosis estimation because is developed focusing in application field that use data of low dimension such as original space DataBase or geography information system. Therefore, studied save structure and index mechanism of new way that support fast search to search bulky good physician data.

• The KIPS Transactions:PartD
• /
• v.16D no.5
• /
• pp.715-728
• /
• 2009

The Enterprise Service Bus based on Java Business Integration is an web service standard and one of the methods for implementing distribution channels of Service Oriented Architecture. Consisting of open source group, extensive venders and users, the ESB based JBI has the problems of ineffectiveness as well as advantages of extensibility of service plug-in. That is, in case users need to use Service plug-in, manual connection of packaging process and sequential distribution method is required. This study, therefore, proposes as a way of trouble-shooting the user-oriented component deployment tool which can manage entire process for deploying The ESB middleware platform to Service unit. At the same time, this study elicited the requirements based on issues of JBI-based ESB and has developed the modeling property, packaging, distribution and evaluation thru Schema analysis of JBI-compatible component. Using the deployment tool this study proposed, users will be able to perform and manage the whole deploying process without additional manual work for connecting component. Not only it is expected that interface based on Graphic User Interface provide usability and convenience but they can also minimize the errors rate through component and route validity verification function provided in deployment tool.