• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.14 no.1
• /
• pp.167-185
• /
• 2019

As most G-20 countries expect medical spending to grow rapidly over the next few decades, the burden of healthcare costs continues to grow globally due to an increase in the elderly population and chronic illnesses, and the ongoing quality improvement of health care services. However, under the rapidly changing technological environment of healthcare and IT convergence, the problem may become even bigger if not properly recognized and not properly prepared. In the context of the paradigm shift and the increasing problem of the medical field, complex responses in technical, institutional and business aspects are urgently needed. The key is to derive a business model that is appropriate for businesses that integrate IT in the medical field. With the arrival of the era of the 4th industrial revolution, new technologies such as Internet of Things have been applied to eHealthcare, and the need for new business models has emerged.In the e-healthcare of the Internet era, it became a traditional firm-based business model. However, due to the characteristics of dynamics and complexity of things Internet in the Internet of things, A business ecosystem-based approach is needed. In this paper, we present and analyze the major success factors of the ecosystem based on the 3 - layer structure of the e - healthcare business ecosystem as a result of research on e - healthcare business ecosystem based on emerging technology such as Internet of things. The three-layer business ecosystem was defined as (1) Infrastructure Layer, (2) Character Layer, and (3) Stakeholder Layer. As the key success factors for the eHealthCare business ecosystem, the following four factors are suggested: (1) introduction of the iHealthcare concept, (2) expansion of the business ecosystem, (3) business ecosystem change process innovation, and (4) business ecosystem leadership innovation.

• Journal of Gifted/Talented Education
• /
• v.26 no.3
• /
• pp.515-539
• /
• 2016

The purpose of this study is to develop the integrated curriculum for gifted elementary students based on ICM (Integrated Curriculum Model) and to apply it for analysis of the relationship between creativity and creative problem solving skills. An integrated curriculum for gifted students attending a university-affiliated institute was developed and applied to twenty mathematically gifted 5th and 6th grade students. TTCT language test and CAT test for students' products from activities were conducted. In addition, tape-recorded group discussions and activities during instruction, and interview with students and teacher, activity sheets were analyzed. As results, their language abilities shown TTCT test have been improved. Furthermore, the correlation between the test results of automata and language creativity, the average of two projects and language creativity, and future problem solving and the average of TTCT showed significant correlations. Results showed the gifted students' understanding of high level concepts and cooperation among groups were needed in order to improve creative problem solving. It suggested a further study research the integrated curriculum applying creativity and giftedness to real-life problem situations for gifted students to make them grow into essential competent persons in the future.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.3
• /
• pp.191-197
• /
• 2019

As the shipbuilding and offshore plant industries grow larger and more complex, their maintenance and inspection systems become more important. Recently, maintenance and inspection systems based on augmented reality have been attracting much attention for improving worker's understanding of work and efficiency, but it is often difficult to work with because accurate matching between the augmented model and reality information is not. To solve this problem, marker based AR technology is used to attach a specific image to the model. However, the markers get damaged due to the characteristic of the shipbuilding and offshore plant industry, and the camera needs to be able to detect the entire marker clearly, and thus requires sufficient space to exist between the operator. In order to overcome the limitations of the existing AR system, in this study, a markerless AR was adopted to accurately recognize the actual model of the pipe system that occupies the most processes in the shipbuilding and offshore plant industries. The matching methodology. Through this system, it is expected that the twist phenomenon of the augmented model according to the attitude of the real worker and the limited environment can be improved.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.1
• /
• pp.55-69
• /
• 2021

For the national economic development, the participation of women in the social and economic activities is crucial. The popularization of start-ups, digital transformation, and WEconomy trends have lowered the barriers to opportunities for women to start a business and provide an environment in which women can grow faster. This paper examines the significance and process of success of women entrepreneurs and the characteristics of innovation strategies and achievements by linking the recently changing business environment of a company, factors influencing the success of women entrepreneurship, and innovation activities. To this end, four companies' cases were analyzed in the fields of distribution/service and consumer products/services, which are areas of large investment among female startups. The result shows that women entrepreneurs recognize the meaning of success as creating and continuing to create a 'corporate value through establishing a trust relationship with customers' within the 'balance between personal life and work.' In terms of the business ecosystem, women entrepreneurs strive for 'business activities based on the win-win growth of consumers, producers and sellers' for success, and rather 'focus on the process with a problem-solving approach' rather than achieving performance-oriented goals. Also through excellent power of observation, flexibility, and execution power, women entrepreneurs conduct business by adapting to changing trends. In terms of innovation activities, the innovation strategy of women-led companies puts priority on 'creating the value customers want' and focuses on innovation in the 'customer-centric business model' rather than technological innovation. As such, women-led companies show several differentiated characteristics, which enable them to create corporate value and achieve sustainable growth. The barriers to challenges and opportunities for women to start a business have been lowered, and an ecosystem has been created for female startups to grow. But why are there still so few women entrepreneurs, and the answer to where we need to close these gaps is ultimately a close analysis and investigation of the field. We must present milestones for growth steps through the accumulation of case studies of women startups that have exited. In addition, women can stand as economic agents only when the policy targets are subdivided and specific approaches to child-rearing and childcare for women entrepreneurs must be taken. This paper expects to serve as basic data for follow-up studies and become the basis of research for women entrepreneurs to grow as economic agents.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.13 no.2
• /
• pp.27-38
• /
• 2018

Since the Korean economic development path has been unique compared to other counties, it is necessary to build an incubation ecosystem matching with unique economic environment in Korea. In order to revive the dynamism of the economy, establishment of the incubator ecosystem should be a policy priority so that ventures with innovative ideas and challenging minds can grow into a global stage. The purpose of this study is to derive the policy implications for establishing ecosystem and infrastructure by comparing to other OECD countries such as US, Israel, Finland, and Japan that can offer meaningful policy implications to Korea. For this purpose, the most appropriate model for explaining the incubation ecosystem in Korea was designed. PCII Model (People, Capital, Incubating, Infra) has 4 elements. It provides a framework for incubation of entrepreneurship, funding for start-up, incubation course, establishment of business foundation infrastructure. The comparative analysis was conducted with 12 sub-items under 4 elements and qualitative and quantitative evaluations were performed for each category. As a result of the comparative analysis, Korea's incubation policy seems to be still in the initial stage in terms of establishment of ecosystem compared to other countries. Therefore, a systematic approach based on the ecosystem model is needed other than the short-term incubation policy.

• Journal of Korean Society for Atmospheric Environment
• /
• v.26 no.5
• /
• pp.517-532
• /
• 2010

After establishment of Banwol industrial complex in 1987, Ansan city becomes the largest industrial sector development in Gyeonggi-do, Korea. As the population and industrial activity grow over this region, toxic air pollutants, particularly POPs (Persistent Organic Pollutants) from various emission sources have been major public concerns. Air samples for POPs monitoring were collected at the industrial sites ($A_2$), residential sites ($B_1$, $B_2$), commercial site (C), and rural/remote site (D) of the area of Ansan during 2008 with a prolonged industrial sampling site $A_1$ from 2001 to 2008. All samples were analysed for 2,3,7,8 substituted-polychlorinated dibenzo-p-dioxin and dibenzofurans (PCDD/Fs) and dioxin like polychlorinatd diphenyls (dl-PCBs). In site $A_1$, a steady decline of their concentrations from 2003 to 2008 was observed due to the reinforced emission guideline from waste incinerators. The average concentration of the PCDD/Fs and dl-PCBs ranged between 0.118 pg-TEQ/$m^3$ (rural/remote site D) and 0.532 pg-TEQ/$m^3$ (industrial area $A_2$). These level were generally consistent with previous studies in Gyeonggi-do, while higher than other places. Most of PCDD/Fs congener were partitioned into particle phase, whereas dl-PCBs were partitioned into gas phase. The logarithm of gas-particle partition coefficient $K_P$ of dl-PCBs and PCDD/Fs were well correlated with sub-cooled liquid vapor pressure $P_L$. The slope $m_T$ of log $K_P$ versus log $P_L$ for PCDD/Fs (-1.22) and dl-PCBs (-1.02) in industrial area ($A_2$) were high compared to other residential/commercial area. It suggests that this area was likely influenced by the direct emission source of PCDD/Fs and dl-PCBs. To simulate the partition of PCDD/Fs and dl-PCBs between gas and particle phase, Junge-Pankow model ($P_L$-base) and $K_{oa}$ model were applied. It was found that J-P model was more suitable than the $K_{oa}$ model in this study.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.28 no.2
• /
• pp.10-16
• /
• 2000

The purpose of this study is to identify relationships between a central angle and a radius of curvature of divided roads in flat terrain of traditional villages, suggesting layout criteria for traditional villages: Nak-an, Sung-Eup, Ha-Whe. This study is sought to find the optimum model through the various SAS regression analyses. a regression analysis of this data was adopted to induce the relationship formula between a central angle of curve and a radius of curvature. Results of this study are as follows: 1) Most of the divided roads in traditional villages have a complex curve rather than a simple curve. 2) A central angle of curve has ranged from 11$^{\circ}$to 127$^{\circ}$, with a mean degree of 63.9. 3) In the lower level of central angle(11-40$^{\circ}$), the branch roads have distributed with a high frequency, but with a low frequency in the higher level of central angle(90-140$^{\circ}$). 4) A radius of curvature in the divided roads has ranged from 0.9m to 59.6, but half of the roads have concentrated on 1-6m of the curvature. 5) Compared to the result of hilly villages in previous study(Ahn, 1999), value of central angels in flat villages is lower than that of hilly villages, while a mean value of the curvature is higher than that of hilly villages. 6) A Non-linear regression analysis, resulting from the SAS application, was useful method to induce a relationship formula between a central angle and a radius of curvature in the branch roads. Our study's formula is as follow: R=100.3*EXP(-0.06*$\delta$)+3.91. 7) Our study model has less error than that of the Kishizuka's method, being applicable to a broader range of the branch roads. 8) A minimum radius of curvature in our study has showed 3.9m, suggesting to reconsider applications of the Kishizuka's(5.8m) in the footpass design, In the study for this presupposition model the efficiency and utility of it can be estimated to grow large according to how much and how far it includes both extremes of data. This study is for the application to a design in future through the numerical formula of divided roads of various traditional villages. The studies from now on will be about the quasi-hilly quasi-hilly village and hilly village supplementing these factors more.

• Food Science of Animal Resources
• /
• v.28 no.2
• /
• pp.187-195
• /
• 2008

The purpose of this study was to establish proper shipping weight and backfat thickness by applying the growth model to backfat thickness, measured by means of not only body weight, but also ultrasonography, and predicting the changes by age. Three breeds, i.e. Duroc, Landrace, and Yorkshie, were analyzed, and the Gompertz, logistic, and Von Bertalanffy model were used for inference with the parameter of the growth model being sex. As a result, both body weight and backfat thickness showed different growth curve parameters and characteristics at inflection points depending on model selection and sex. As for backfat thickness, in estimating the inflection point, unlike the case of body weight, the inflection ages of the boars of the Duroc breed was earlier than that of sows, whereas the inflection ages of the sows of the Landrace and Yorkshire breeds was earlier than that of boars. More than anything else, in the analysis of the changes in backfat thickness according to body weight, as the body weight reached 145kg, the backfat thickness showed much variation as great as 1.7-3.2 cm in each breed and sex. In addition, unlike the other breeds, the boars of the Landrace breed showed an exponential type of relationship between body weight and backfat thickness. As they grow to become 100 kg or heavier, abrupt change in back fat thickness was confirmed. If the growth of body weight and backfat thickness is understood and the genetic relationship is taken advantage of like this, it would be possible to set desired body weight and backfat thickness, and thus help effectively set the shipping time. If not only the phenotype, but also genetic parameters about growth characteristics are estimated and analyzed additionally, more effective data can be generated.

• International Area Studies Review
• /
• v.20 no.1
• /
• pp.23-51
• /
• 2016

This study analyzed the expected economic effects of the Korea-GCC FTA and sought strategies for industrial cooperation. To see the economic effects of Korea-GCC FTA, we analysed the effect of the oil tariff reduction of economy by Vector Autoregression(VAR) model. The estimation results shows that following the abolishment of the tariff on crude oil imports, GDP, GNI and consumption are expected to grow by 0.212%, 0.389% and 0.238%, respectively. Meanwhile, investment, export and import are estimated to drop by 0.462%, 0.413% and 0.342%, respectively. As for prices, producer prices are to rise by 6.356%p, whereas consumer prices fall by 2.996%p. In short, the Korea-GCC FTA and resultant abolishment of the tariff on crude oil imports followed by the decline in crude oil prices will result in declining prices whilst macroeconomic indices, such as GDP, GNI and consumption, will increase exerting positive effects on domestic economic growth. Also, it is necessary to proactively respond to GCC member states' industrial diversification policies for FTA-based industrial cooperation to diversify the sources of crude oil and natural gas imports for further resource risk management.

• Journal of Ecology and Environment
• /
• v.45 no.4
• /
• pp.277-286
• /
• 2021

Background: As trade increases, the influx of various alien species and their spread to new regions are prevalent and no longer a special problem. Anthropogenic activities and climate changes have made the distribution of alien species out of their native range common. As a result, alien species can be easily found anywhere, and they have nothing but only a few differences in intensity. The prevalent distribution of alien species adversely affects the ecosystem, and a strategic management plan must be established to control them effectively. To this end, hot spots and cold spots were analyzed according to the degree of distribution of invasive alien plants, and major environmental factors related to hot spots were found. We analyzed the 10,287 distribution points of 126 species of alien plants collected through the national survey of alien species by the hierarchical model of species communities (HMSC) framework. Results: The explanatory and fourfold cross-validation predictive power of the model were 0.91 and 0.75 as AUC values, respectively. The hot spots of invasive plants were found in the Seoul metropolitan area, Daegu metropolitan city, Chungcheongbuk-do Province, southwest shore, and Jeju island. Generally, the hot spots were found where the higher maximum temperature of summer, precipitation of winter, and road density are observed, but temperature seasonality, annual temperature range, precipitation of the summer, and distance to river and sea were negatively related to the hot spots. According to the model, the functional traits accounted for 55% of the variance explained by the environmental factors. The species with higher specific leaf areas were more found where temperature seasonality was low. Taller species preferred the bigger annual temperature range. The heavier seed mass was only preferred when the max temperature of summer exceeded 29 ℃. Conclusions: In this study, hot spots were places where 2.1 times more alien plants were distributed on average than non-hot spots (33.5 vs 15.7 species). The hot spots of invasive plants were expected to appear in less stressful climate conditions, such as low fluctuation of temperature and precipitation. Also, the disturbance by anthropogenic factors or water flow had positive influences on the hot spots. These results were consistent with the previous reports about the ruderal or competitive strategies of invasive plants instead of the stress-tolerant strategy. The functional traits are closely related to the ecological strategies of plants by shaping the response of species to various environmental filters, and our result confirmed this. Therefore, in order to effectively control alien plants, it is judged that the occurrence of disturbed sites in which alien plants can grow in large quantities is minimized, and the river management of waterfronts is required.