• Journal of Ocean Engineering and Technology
• /
• v.17 no.3 s.52
• /
• pp.13-20
• /
• 2003

This research aims at investigation of accuracy potential of RTK(Real-Time Kinematic) GPS in combination with Echo Sounder(E/S) for the coastal mapping. Apart from this purpose, the accuracy of ambiguity resolution with the OTF(On The Fly) method was tested with respect to the initialization time. The result shows that the accuracy is better than 1cm with 5-minute initialization in the distance of 10km baseline. The seaside topography was measured by the RTK GPS only, on the other hand the seafloor topography was surveyed in combination of RTK GPS and E/S. Comparing to the volume of seaside measured by RTK GPS and digital topographical map, the difference of only $2\%$ was achieved. This indicates that the coastal mapping. As a result, it has been revealed that every possible noise in surveying could be corrected and the accuracy could be improved. The accuracy of GPS data acquired in real time was as good as that acquired by post processing. It is expected that it will be useful for the analysis of coastal geographic characteristics because DTM(Digital Terrain Model) can be also constructed for the harbor reclamation, the dredging, and the variation of soil movement in a river.

• Journal of the Korean Geophysical Society
• /
• v.9 no.2
• /
• pp.77-86
• /
• 2006

Aplications of the real-time kinematic GPS surveying and inertial measurement unit have been beingRTK GPS allows the use of a static base station and remote rover unit to allow for data collectionwithin several seconds and in real time. It is useful for monitoring the behaviors of massive structureslike bridges. And this study purposed to implement a method of deciding the acurate dynaimc attitudeof structures by IMU. In this study, among GPS methods, we used RTK GPS to analyze the precisionof monitoring and then on the basis of it, we developed a monitoring system using RTK GPS anda deviation betwen observation values, X axis was 1mm, Y axis was 1mm and Z axis 2.2mm. I tturned out that it was possible to monitor and measure structures by RTK GPS and IMU.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.778-778
• /
• 2012

수문조사시설 중 하나인 영점표고검정수준점은 장기간의 시간 경과에 따른 하천 수문관측 환경변화로 망실 및 침하 등으로 인한 신뢰도가 저하되고 있는 것이 현실이다. 수위표 영점표고는 일반적으로 하상부터 자유수면의 높이까지를 일컫는 수위에 대한 기준 높이가 되는 값으로 영점표고의 변동은 수위의 변동을 초래하기 때문에 관측된 수위의 시계열 연속성을 확보하기 위해서는 영점표고검정수준점의 신뢰도가 대단히 중요하다. 따라서 본 연구에서는 수문자료에 직접적인 품질에 영향을 줄 수 있는 영점표고검정수준점에 대하여 체계적이고 전문적인 공공측량을 실시하였으며, 왕복수준측량 과정에서 발생할 수 있는 오류 및 오차를 검증하기 위해 RTK-GPS 측량을 병행 실시하였다. RTK-GPS 측량을 실시하기 전 낙동강권역내의 국립지리정보원에서 관리하고 있는 통합기준점을 대상으로 삼각망 구축을 실시하였다. RTK-GPS 측량의 결과를 토대로 직접수준측량과의 비교 검토를 실시하였으며, 두 측량성과간의 차이가 0.2m 이상을 경우에는 재 측량을 실시하여 발생될 수 있는 오류를 최소화 하였다. 또한 수준측량과 RTK-GPS 측량으로 확정된 영점표고검정수준점의 표고값을 이용하여 수위표 영점표고의 적정성을 검토하고자 하는 해발수위 비교를 실시하였다. 비교방법은 비교적 수면경사가 크게 나타나지 않는 지점을 선택하여 적정성을 검토하였으며, 기존 영점표고검정수준점보다 개선되는 효과를 얻을 수 있었다.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.10a
• /
• pp.109-113
• /
• 2003

GPS 상시관측소의 활용과 중요성은 GPS측량에서 폭넓은 사용과 비교적 높은 정확도를 충족시키는 방안으로 점점 가치를 더 하고 있다. 현재 RINEX 포맷 형태로 인터넷 서비스를 하고 있는 GPS 상시관측소의 자료를 이용하여 기준점으로써의 가치를 평가하고 또한 시간과 경비를 줄일 수 있는 방법인 VRS-GPS기법을 연구하고자 한다. 본 연구에서는 임의의 기준국을 설치하여, 기존 삼각점과 GPS 상시관측소를 이용해 관측망을 형성, 그 결과를 비교 고찰하였으며 이 기준국을 RTK-GPS의 고정국으로 하여 실시간 측위를 하였다. 고정국은 전자 가상 기준국인 VRS-RTK 개념으로 가정하고 비교, 검증하였다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.15 no.3
• /
• pp.87-96
• /
• 2007

In the numerical cadastral surveying field, the cadastral surveying would be measured with the Total Station surveying (electronic plane table surveying) system that consist the Total Station for surveying and the computing system for recording and editing the measured coordinates data by the TS. This study would suggest the advanced method, which is used on the RTK-GPS instead of TS for surveying and the computing system for handling the coordinates data and mapping. As a result of this study, although the measurement accuracy of the RTK-GPS and TS surveying make no greate difference, the suggested method reduces the cost of time and work force with the TS surveying. Besides, the new survey method would be more efficient due to directly handling the data and mapping in the field.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.21 no.4
• /
• pp.393-401
• /
• 2003

Automatic control technologies for the marine pile driving provides accurate and rapid intruding into the planned positions of the pile with planned slope and direction, so that the construction maintenance and management are more efficient and the quality of the construction is more promising. Therefore, in this study, the application scheme of RTK GPS to the automatic control of the pile driving presented. It is expected that the presented scheme using the precise RTK GPS technique assures the efficient and economic 3D positioning accuracy for the precise marine construction management like the precise foundation of marine structures made of piles and the dredging work. It is found that the suggested scheme decrease 60% of the construction error compared with specifications reference because marine position accuracy is measured within 4cm in real time. In addition, the automatic position control system using GPS reduced the construction period and cost compared with existing methods about 30% and 35%, respectively.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.12 no.1
• /
• pp.54-63
• /
• 2009

Various methods have been employed for acquiring beach surface data, which are used to monitor shoreline changes due to beach erosion. This study explores the possibility of constructing and implementing a surface model of beach using data acquired with a terrestrial laser scanner and RTK-GPS. Digital images and three-dimensional data of beach areas acquired at 20 cm intervals using a laser scanner were used to create a digital surface model covered with digital image. Seven months later, the beach area was surveyed using an RTK-GPS, and another beach model was constructed using the data collected with an accuracy of 1.9 cm. The use of a terrestrial laser scanner is expected to ensure acquisition of good quality results and help deal with seasonal changes in beach areas. Because readings obtained with the RTK-GPS are dependent on the number of sampling points in beach model, difficulties are encountered when fixing the survey points. However, RTK-GPS could be used to implement a three-dimensional model by correcting the hidden parts in images obtained using a terrestrial laser scanner. Therefore, an RTK-GPS and a terrestrial laser scanner can be used in combination to obtain more precise data for the construction of beach model data.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.3
• /
• pp.267-275
• /
• 2007

Nowadays, it grows bigger the importance of water resource management, and so, hydrographic surveying technology in river is important because it serves basic data about river environment. And, also, the application field of GPS has been increased and expected to be more increased because of the change of the geodetic reference system to World Geodetic System. In this study, hydrographic surveying in Hwang river in Geochang is accomplished by RTK GPS and Total Station and they are compared and analyzed the both results. The section profile in river is made by Hec-Ras program and CAD. The results show it can be saved 15.3% in surveying times and the amount of surveying works can be enlarged 42.5%. And the standard error between RTK results with calibration and the results without calibration turned out as 2.1 cm. So we have a conclusion that RTK GPS is more efficient surveying method than total station in hydrographic surveying in river.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.21 no.3
• /
• pp.199-207
• /
• 2003

In the study, the open area keeping a few visible satellites and the urban area covered with the high building, an electric pole were chosen far evaluation of accuracy of satellite positioning. First, suggest the validity of GPS/GLONASS, TS/RTK-GPS, and compared the accuracy with that of the classical surveying method. As a result, In static relative surveying, the difference of between the known cadastral supplementary control station and that of the acquired is 0.000∼.0006m in GPS alone, GPS/GLONASS, and In the RTK-GPS/TS, 0.010∼0.077m on the non-ambiguity fixed solutions in the urban area 0.008∼0.078m in the open area. it proved to be valid because it is within the allowed connecting errors, i.e 12cm on the baseline of loom in l/l,200 cadastral map.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.65-69
• /
• 2004

기존 라디오파를 이용한 RTCM 방식에서는 전파의 직진성으로 인한 수신 장애가 많이 발생하였다. 이런 문제를 극복하기 위해 라디오 모뎀을 사용하지 않고 휴대폰에 내장된 CDMA 방식을 이용하여 이동전화국 기지국을 통한 오차 보정량을 전송하여 RTK-GPS의 문제점을 해결하고자 하였다. 연구 결과 기존 RTCM 방식과 같은 건물 차폐에 따른 신호 차단의 영향은 없었으며, 제적 작업 시에도 라디오 모뎀의 송수신의 장애로 인한 데이터 손실을 막을 수가 있었다. 마지막으로 10km이상의 거리에서도 작업을 수행하였다. 그 결과 이동전화국 기지국을 이용하였기 때문에 신호의 송수신에는 문제가 없었지만, 공간적 상관성의 문제로 인해 그 값을 쓸 수가 없었다. 따라서, 최근 증가하고 있는 GPS 측량 기법 중에서 현장에서 손쉽게 성과 값을 구하는 실시간 이동측량(RTK GPS Real Time Kinematic GPS)의 문제점을 보완하고 그 효율성을 제고하였다.