• Journal of the Korea Institute of Military Science and Technology
• /
• v.3 no.2
• /
• pp.131-139
• /
• 2000

A design of CPS attitude determination system is described in this paper. The designed system is a low cost high precision 24 channel single frequency GPS(Global Positioning System) receiver which provides a precise absolute heading and pitch (or roll) as well as a position. It uses commercial chip-set and consists of two RF parts, two signal-tracking parts, a processor, memory parts and I/Os. In order to determine precise attitude, accurate carrier phase measurements and an efficient integer ambiguity resolution method are required. To meet these requirements, a PLL (Phase Locked Loops) is designed, and an algorithm called ARCE (Ambiguity Resolution with Constraint Equation) is adopted. The hardware and software structure of the system will be described, and the performance evaluated under various conditions will be presented. The test results will promise that more reliable navigation system be possible because the system provides all navigational information such as position, velocity, time and attitude.

• Bulletin of the Korean Space Science Society
• /
• 2003.10a
• /
• pp.48-48
• /
• 2003

A precision orbit determination (POD) system of low Earth orbiter using the GPS dual frequency measurements has been developed. It is an option of KOMPSAT-2 POD process system. In this research, the orbit determination using the real dual frequency carrier phase measurements of the SAC-C satellite was conducted to verify KOMPSAT-2 POD system reliability. The SAC-C satellite is an international cooperative mission between NASA, the Argentine Commission on Space Activities (CONAE), Centre National d'Etudes Spatiales (CNES or the French Space Agency), Instituto Nacional De Pesquisas Espaciais (Brazilian Space Agency), Danish Space Research Institute, and Agenzia Spaziale Italiana (Italian Space Agency). The SAC-C was launched at November 21, 2000. The altitude of SAC-C is 702 km and it carries a TurboRogue III GPS and four high gain antennas developed by the JPL. The receiver is able to generate the dual frequency code and carrier phase data. Double-differenced carrier phase measurements were formed using 25 IGS stations. The data were sampled at 30 seconds interval. Fully dynamic approach was adopted for POD. The POD results were compared with those of JPL using GOA n software. The comparison verifies that deci-meter level 3D position accuracy of low Earth orbiting satellite could be achieved. The POD system has been developed successfully.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.327-332
• /
• 2006

In airborne gravimetry, there are two data streams. One is the specific force measured by an air/sea gravimeter or accelerometers, the other is kinematic acceleration measured by DGPS. And the difference of them provides the gravity disturbance information. To satisfy the requirement of most applications, an accuracy of 1mGal $(1mCal=10^{-5}m/s^{2})$ with a spatial resolution of 1km is the aim of current airborne gravimetry. There are two different methods to derive the kinematic acceleration. The generally used method is to differentiate the position twice, and the position can be calculated by commercial DGPS software. The main defect of this method is that integer ambiguities need to be fixed to get the precise position solution, but it's not a trivial thing for long base line. And to fix integer ambiguities, the noisier iono-free measurement is used. When differentiation is applied, noise is amplified and will influence the accuracy of acceleration. The other method is to get carrier phase acceleration by differentiate the carrier phase first, and then using the acceleration of GPS satellite to derive the vehicle acceleration. The main advantages include that fixing integer ambiguities is not needed anymore, position can be relaxed to about 10 meters, and smoother acceleration can be got since iono-free measurement is not needed. In some literatures, it's considered that the dynamic performance of the second method is inferior to that of the first. Through analysis, it is found that the performance degradation in dynamic environment results from the simplification of the GPS carrier phase observable model. And an iterative algorithm is presented to compensate the model error. Using a dynamic GPS data from an aeromagnetic survey, the importance of this compensation is showed at last.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.21 no.2
• /
• pp.173-180
• /
• 2003

As the utility value of GPS in surveying field is on the increase after the conversion into the world geodetic system, most of the baseline processing programs seeking the relative baseline vector for the roving point based on the base point are dependent on the foreign software, and such dependence remains a stumbling block to its wide application. In this study an algorithm was established settling ambiguity through LAMBDA techniques and the baseline processing program was developed for Ll carrier phase using visual c＋＋ 6.0, which is an object-oriented language. And the developed program proved that it maintained a difference of less than 4.9 cm over the short baseline of 4.9 km or shorter when compared with other commercialized programs.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.377-382
• /
• 2006

Precision approach and landing of aircraft in a remote landing zone autonomously present several challenges. Firstly, the exact location, orientation and elevation of the landing zone are not always known; secondly, the accuracy of the navigation solution is not always sufficient for this type of precision maneuver if there is no DGPS availability within close proximity. This paper explores an alternative approach for estimating the navigation parameters of the aircraft to the landing area using only time-differenced GPS carrier phase measurement and range measurements from a vision system. Distinct ground landmarks are marked before the landing zone. The positions of these landmarks are extracted from the vision system then the ranges relative to these locations are used as measurements for the extended Kalman filter (EKF) in addition to the precise time-differenced GPS carrier phase measurements. The performance of this navigation algorithm is demonstrated using simulation.

• Journal of the Korean Institute of Navigation
• /
• v.6 no.2
• /
• pp.13-33
• /
• 1982

The NAVSTAR/GPS is a satellite-based navigation system that will provide extremely accurate three-dimensional position and velocity information to users anywhere on or near the earth. This system has been studied primarly for military use and thus the results of studies are seldom obtainable for civilian use up to date. Expecting this system to be opened to civilian use in the future, this paper aims to the collection of basic data of the PN phase modulated communication system adopted in the GPS system by computer simulation. The results of studies are as follows; 1) The PN phase modulation of the speed of 106b/s can be simulated by Fourier summation, the spectrum region which can be restricted is in the region of 0.5-1.5 MHz and spectrum number required is over than 270. 2) By computer simulation, it is verified that optimum r.f filter bandwidth is about 0.3 MHz for the case of $10^6$b/s PN codes phase modulated in 1.575GHz carrier. 3) In case that PN rate to data rate is between 10 and 100, the allowable minimum SNR to demodulate data signal correctly by optimum LPF is about 0.3. It is also verified that the larger the frequency ratio of PN code to the data code, the lower the allowable minimum SNR required.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.11
• /
• pp.1037-1043
• /
• 2004

In this paper, a new fault detection and isolation algorithm fur inertial sensor system is proposed. To identify the inertial sensor fault, single antenna GPS receiver is used as an effective redundancy source. To use GPS receiver as redundancy for the inertial sensors, the algorithm to estimate the attitude and acceleration using single antenna GPS receiver is adopted. By using Doppler shift of carrier phase signal and kinetic characteristics of aircraft, attitude information of aircraft can be obtained at the coordinated flight condition. Based on this idea, fault diagnosis algorithm for inertial sensors using single antenna GPS based attitude is proposed. For more effective FDI, decision variables considering the aircraft maneuver are proposed. The effectiveness of the proposed algorithm is verified through the numerical simulations.

• Journal of Astronomy and Space Sciences
• /
• v.19 no.4
• /
• pp.377-384
• /
• 2002

We have developed Real-time Phase DAta processor(RPDAP) for GPS L1 carrie. And also, we tested the RPDAP's positioning accuracy compared with results of real time kinematic(RTK) positioning. While quality of the conventional L1 RTK positioning highly depend on receiving condition, the RPDAP can gives more stable positioning result because of different set of common GPS satellites, which searched by elevation mask angle and signal strength. In this paper, we demonstrated characteristics of the RPDAP compared with the L1 RTK technique. And we discussed several improvement ways to apply the RPDAP to precise real-time positioning using low-cost GPS receiver. With correcting the discussed weak points in new future, the RPDAP will be used in the field of precise real-time application, such as precise car navigation and precise personal location services.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.12
• /
• pp.1032-1039
• /
• 2012

The present paper deals with precise relative positioning of formation satellites with long baseline in low Earth orbit making use of L1/L2 dual frequency GPS carrier phase measurements. Kinematic approach means to describe the motion of objects without taking its mass/dynamics model into consideration. The advantage of the kinematic approach is that information about dynamics of the system is not applied, which gives more flexibility and could improve the scientific interest of the observations made by the mission. The ionosphere terms, which are not canceled by double differenced measurement equation in the case of the long baseline, are explicitly estimated as unknown parameters by extended Kalman filter. The estimated float ambiguities by EKF are solved by existing efficient integer vector search strategy under integer least square condition. For the integer vector search, we employ well known MLAMBDA. Finally, The feasibility and accuracy of processing scheme are demonstrated using the GPS measurements for two satellites in low Earth orbit separated by baselines of 100 km.

• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.4
• /
• pp.307-313
• /
• 2021

Modernized GNSS signal structures tend to use tiered codes, and all GNSSs use binary codes as secondary codes. However, recently, signals using polyphase codes such as Zadoff-Chu sequence have been proposed, and are expected to be utilized in GNSS. For example, there is Tiered Differential Polyphase Code (TDPC) using polyphase code as secondary code. In TDPC, the phase of secondary code changes every one period of the primary code and a time-variant error is added to the carrier tracking error, so carrier tracking ambiguity exists until the secondary code phase is found. Since the carrier tracking ambiguity cannot be solved using the general GNSS receiver architecture, a new receiver architecture is required. Therefore, in this paper, we describe the carrier tracking ambiguity and its cause in signal tracking, and propose a receiver structure that can solve it. In order to prove the proposed receiver structure, we provide three signal tracking results. The first is the differential decoding result (secondary code sync) using the general GNSS receiver structure and the proposed receiver structure. The second is the IQ diagram before and after multiplying the secondary code demodulation when carrier tracking ambiguity is solved using the proposed receiver structure. The third is the carrier tracking result of the legacy GPS (L1 C/A) signal and the signal using TDPC.