• 반도체디스플레이기술학회지
• /
• 제18권1호
• /
• pp.59-64
• /
• 2019

Recently, time synchronous has become important for satellite launch control facilities, multiple thermal power plants, and power system facilities. Information from time synchronous at each of these industrial sites requires time synchronization to control or monitor the system with correlation. In this paper, IRIG-B codes, which can be used for time synchronous, are used as specifications in IRIG standard 200-16. Signals from IRIG-B120 (Analog), IRIG-B000 (Digital), and one PPS are output from GPS receiver. Using the signal from IRIG-B120 (Analog), it passes through the signal from the analog amplifier and generates one PPS signal using the field-programmable gate array. The FPGA is used cyclone EPM570T100I5N. According to IEEE regulations, the error of one PPS is specified within 1us, but in this paper, the error is within 100ns. The output of the one PPS signal was then compared and tested against the one PPS signal on the GPS receiver to verify accuracy and reliability. In addition, the proposed time synchronous is simple to construct and structure, easy to implement, and provides high time precision compared to typical time synchronous. The output of the one PPS signals and IRIG-B000 signal will be used in many industry sectors.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.737-738
• /
• 2011

전력 계통현상 분석장치(DFR)에서 시각동기에 대한 중요성이 부각됨에 따라 장치의 시각동기가 중요하게 대두되고 있다. 본 연구내용에서 보여주고자 하는 DFR TimeSync Simulator는 GPS 수신기로부터 IRIG-B 신호와 1PPS 신호를 수신하여 계통현상 분석장치의 사고발생 이벤트를 위한 절대시각을 제공하는 장치이다. 이 절대시각은 계통현상 분석장치의 정밀성 및 품질을 검증하는데 적용한다. 그리고 개발된 Simulator가 정확한 1PPS 신호를 산출해 내는지를 검증하기 위해 GPS 수신기의 1PPS 신호와 Simulator에서 출력되는 1PPS 신호의 파형을 비교 실험하여 정확도 및 신뢰성을 확인하였다.

• 동력기계공학회지
• /
• 제14권1호
• /
• pp.5-10
• /
• 2010

Both the accuracy and stability of the clock get from the GPS receiver are considered in the range of pps. And we verified the system clock stability of a micro-controller system using the pps pulse supplied by the GPS receiver. In complex system of digital processing, the rack of precise timing signal may cause the serious problem or breakdown accident. To get rid of these undesirable problems, we introduced VCXO circuit to a micro-controller system to preserve high accurate clock stability.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
• /
• pp.367-370
• /
• 2006

A GPS-based time synchronization technique employing a refined HW circuitry and SW algorithm is considered as fine time-management system for Low Earth Orbit (LEO) remote sensing satellites. By synchronizing the On-Board Time (OBT) within satellites to the GPS 1PPS, a very expensive, highly accurate on-board clock is not required to determine the precise on-board time management. Also, the satellite command generation in ground stations and postprocessing of earth observation data which a particular image is acquired. This paper analyses on-orbit verification of the existing satellite time sync architecture and presents a new time sync architecture, operation and relation between the OBT and the GPS time.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2623-2626
• /
• 2003

GPS provides two services which include SPS(Standard Positioning Service) and PPS(Precise Positioning Service). While SPS users can navigate in more precise due to cancellation of SA(Selective Availability), SPS users has still less precision navigation than PPS users. L1/L2CS integrated receiver can provide more precise navigation to SPS users because the delay of Ionosphere will be cancelled by using two frequencies (L1 and L2). This paper designs an integrated L1/L2CS digital correlator to prepare the L2C signal that will be provided in 2003. Also L2CS transmitter is designed to confirm L2CS correlator.

• Journal of Positioning, Navigation, and Timing
• /
• 제10권1호
• /
• pp.43-48
• /
• 2021

Most existing studies on the wide-area differential global positioning system (WADGPS) used standard positioning service (SPS) receivers in their observation reference stations which provide the central control station global positioning system (GPS) measurements to generate augmentation data. In the present study, it is considered to apply a precise positioning service (PPS) receiver to an observation reference station which is located in the threatened jamming area. Therefore, the reference station network consists of a PPS receiver based observation reference station and SPS receiver based observation reference stations. In this case, to maintain correction performance P1C1 differential code bias (DCB) should be compensated. In this paper, P1C1 DCB estimation algorithm was applied to the PPS/WADGPS system and performance test results using measurements in the Korean Peninsula were presented.

• 한국항공우주학회지
• /
• 제32권5호
• /
• pp.104-108
• /
• 2004

CDMA 무선 통신망 기지국의 경우 GPS를 사용한 시각동기 시스템에 전적으로 의존한다. 따라서 우리는 GPS의 예측할 수 없는 고장 또는 미국의 전략적 목적으로, 이용이 불가능할 경우를 대비하여 대체 시스템을 준비해야 한다. 본 연구에서는 정지궤도 통신위성을 이용한 시각동기 시스템을 개발하기 위한 지상 시험 시스템을 구축하였으며, 송수신 보드를 설계, 제작, 시험하였는데, 이 보드는 원자시계로부터 1PPS 신호를 수신 받으면 버퍼에 저장된 데이터를 위성 모뎀에 송신하고, 위성 모뎀으로부터 데이터가 수신되면, Universal Counter 가 지연시간을 측정하도록 1PPS를 생성하여 출력하는 기능을 수행한다.

• 한국통신학회논문지
• /
• 제38C권2호
• /
• pp.141-154
• /
• 2013

신호수신장치들간 시각 동기화는 TDoA를 이용한 위치 탐지에 있어 가장 중요한 전제 사항이 된다. 본 논문에서는 시스템의 시각동기 정확도를 위하여 고정밀도의 OCXO와 DPLL을 이용하여 원자 클럭을 사용하는 GPS 위성으로부터 수신되는 1 pps(pulse per second) 신호에 위상동기 되는 방식을 제안한다. GPS 기반 고정밀 타이밍 레퍼런스의 성능은 근본적으로 매우 우수한 장기간에 걸친 주파수 안정도(long-term frequency stability)를 갖는 GPS 타이밍 신호의 특성을 따라간다고 볼 수 있으며, GPS 타이밍 신호에 동기가 되면 0.001 ppb(part per billion) 급의 초정밀 타이밍 레퍼런스를 통해 시각 동기의 정확도를 향상시킨다. 제안하는, 향상된 시각 동기 정확도를 통해 TDoA 기반의 위치 탐지 기술에서의 측정 오차를 평가하고, 시각동기 오차 개선 방법이 TDoA 기반의 위치 측정 오차를 크게 개선함을 보인다.

• 제어로봇시스템학회논문지
• /
• 제12권8호
• /
• pp.789-797
• /
• 2006

A new method for the GPS repeater based indoor positioning is proposed and its feasibility is verified by experiments in previous paper. But the problems how can identify switching GPS repeater's ID and when switching will be occurred are remained. To solve the problem faced with, we propose the time synchronized switching GPS repeater and the methods of the detection of switching time and the estimation of TDOA. First, switching GPS repeater retransmits the signals synchronized on GPS time, sequentially. Always, first switching time is synchronized with 1 PPS. Second, we formulate the detection of switching time and the estimation of TDOA and propose the various methods. No method is existed absolutely superior to others in any conditions but the method is existed superior to others in specific condition. Finally, feasibility of indoor positioning using time-synchronized switching GPS repeater is evaluated through experiments in anechoic chamber and general environment with multipath.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.82.3-82
• /
• 2002

This paper designs an integrated navigation system that uses the signals from both GPS satellites and pseudolites. While GPS satellite clocks are synchronized, pseudolite clocks are not exactly synchronized even though pseudolite can use 1PPS signal from the GPS receiver. This can cause large range error and can be solved by transmitting the correction information. Assuming that the positions of pseudolites are known, it is possible to determine the true range between two pseudolites. Also, from the measurement of pseudolite signals, the pseudo range between two pseudolites can be calculated. Using the difference between the true range and the pseudo range, each pesudolite can produce correc...