• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2004.03a
• /
• pp.535-541
• /
• 2004

GPS는 직접적인 시통 및 거리에 대해 제한을 받는 일반 재래식 측량으로는 관측하기 힘든 중ㆍ장기선 관측의 경우 기선결정에 대한 정확도와 활용성이 우수하다고 알려져 있다. 그러나 현재 실질적으로 관측하여 취득하고자 하는 위치정보를 얻기 위해 지역의 대소에 관계없이 고가의 이주파 수신 장비를 사용하고 있으며, 최적의 기선해석과 망조정에 의한 성과를 얻기 위한 데이터 처리과정이 엄밀하게 확립되어 있지 않다 이러한 이유들로 인하여 고가의 이주파 수신기가 여러 분야에 적용되고 있으며, 성과물를 산출하고 있는 실정이다. 본 연구에서는 이주파 수신기를 사용하여 전국에 산재하고 있는 국가 기준삼각점을 대상으로 관측을 실시하여, 일주파만을 처리하는 L₁ Only 방식과 이주파를 처리하는 L₁&L₂ 방식과의 비교 분석하여 일주파에 대한 정확도와 적용성 그리고 기선의 거리에 따른 한계성에 대해 검증하고자 한다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.1 s.19
• /
• pp.83-90
• /
• 2002

Control point survey by GPS can save labor and time and can obtain result of high accuracy, but if excessive error is contained to Control point that is used to GPS relative positioning, the error that has influence on new point is propagated to various configuration. therefore poor triangulation points that are caused by careless management are existed, a product of the triangulation points still are in many case. In order to select new point, this study carried out error-analysis of surrounding-control-points and performed selective process of control point. The propriety parts of control points that are used to verify precision is identified by means of comparing existing product with or GPS product about some control points after directly observe each baseline by using EDM. As the error is analyzed by static positioning the optimum control point is selected, the precision of survey data by EDM is improved than GPS data.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.2
• /
• pp.213-223
• /
• 2009

In geoid modelling field, it is very important the GPS/leveling data because it could be check-out the accuracy of gravimetric geoid and computed the hybrid geoid. In this study, GPS surveying was accomplished in the test area including mountainous area to improve the GPS/leveling data density in Korea. And the geometric geoidal heights was calculated using the GPS/leveling data in the test area and the accuracy of the geoidal heights was analyzed. For this study, GPS surveying was accomplished on the 211 1st and 2nd order benchmarks in Gyeongbuk province and 198 GPS/leveling data were achieved after both baseline analysis and network adjustment. Geometric geoidal heights were calculated using these 198 GPS/leveling data and the accuracy analysis was done by comparison with the geoidal heights from EGM2008 geopotential model. The results showed that the bias and standard deviation computed from 190 GPS/leveling data after gross removal was -0.185$\pm$0.079m. And also, the accuracy analyses according to the benchmark order, baseline length, and altitude were accomplished.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2004.03a
• /
• pp.361-366
• /
• 2004

GPS 관측기법을 지적측량에 도입하기 위하여 GPS를 이용한 새로운 지적측량 모형(Model)을 정립하는 연구와 관련 기술들을 개발하는 연구가 활발히 진행되고 있다. 이와 같은 추세에 발맞추어 GPS 자료처리 및 기준점 성과산출과 관련하여 국내ㆍ외 측량 관련 상용 GPS 자료처리 소프트웨어의 현황 및 성능을 파악하고, 자료처리 알고리즘을 분석하여, 우리 실정에 적합한 GPS 자료처리 소프트웨어를 개발하는 것을 본 연구의 목적으로 한다. 본 연구에서는 국내ㆍ외의 전문 업체, 기관(대학)이 보유하고 있는 상용 소프트웨어 현황 분석 및 자료처리 방법에 따른 오차 발생을 연구하여 기선해석, 망 조정, 좌표변환 등 에 관련된 전문 소프트웨어 기능을 비교 분석하여 자료처리 산출성과의 정확도를 향상시키는 방향을 모색한다. 또한 기존 GPS 자료처리 소프트웨어에 적용된 알고리즘을 분석하고 지적측량성과 산출에 최적인 알고리즘을 연구하여 새로운 지적기준점 성과 산출을 위한 지적측량 성과계산 소프트웨어를 개발한다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.3
• /
• pp.237-247
• /
• 2011

As of 2011, 72 Permanent GPS Stations are installed to control DGPS reference points by the National Geographic Information Institute in South Korea. As the center of the Earth's mass continues to move, the coordinates of the permanent GPS stations become inconsistent over time. Thus, a reference frame using a set of coordinates and their velocities of a global network of stations at a specific period has been used to solve the inconsistency. However, the relative movement of the permanent GPS stations can lower the accuracy of GPS relative positioning. In this research, we first analyzed the data collected daily during the past 30 months at the 40 permanent GPS stations within South Korea and the 5 IGS permanent GPS stations around the Korean Peninsula using a global network adjustment. We then calculated the absolute and relative amount of movement of the GPS permanent stations. We also identified the optimum renewal period of the permanent GPS stations considering the accuracy of relative GPS surveying. Finally, we developed a Korean a Korean crustal movement model that can be used to improvement of accuracy.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.1
• /
• pp.87-96
• /
• 2012

The U.S. Geological Survey (USGS) announced that an earthquake of 9.0 magnitude had occurred near the east coast of Japan on March 11, 2011, resulting in a displacement of the crust of about 2.4 meters. The Korean peninsula is located on the Eurasian tectonic plate that stretches out to Japan; therefore, there is a high possibility of being affected by an earthquake. The Korean GPS CORS network operated by the National Geographic Information Institute (NGII) was processed for ten days before and after the earthquake. Both static and kinematic baseline processing were tested for the determination of crustal deformation. The static baseline processing was performed in two scenarios: 1) fixing three IGS stations in China, Mongolia and Russia; 2) fixing SUWN, one of the CORS networks in Korea, in order to effectively verify crustal deformation. All data processing was carried out using Bernese V5.0. The test results show that most of the parts of the Korean peninsula have moved to the east, ranging 1.2 to 5.6 cm, compared to the final solution of the day before the earthquake. The stations, such as DOKD and ULLE that are established on the islands closer to the epicenter, have clearly moved the largest amounts. Furthermore, the station CHJU, located on the southwestern part of Korea, presents relatively small changes. The relative positioning between CORS confirms the fact that there were internal distortions of the Korean peninsula to some extent. In addition, the 30-second interval kinematic processing of CORS data gives an indication of earthquake signals with some delays depending on the distance from the epicenter.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.10a
• /
• pp.81-86
• /
• 2003

As the utility value of GPS in surveying field is on the increase after the conversion into the world geodetic system, it is attracting the interest of many people involved in the application of GPS. In this study an algorithm was established settling ambiguity through LAMBDA techniques and the baseline processing program was developed for L1/L2 carrier phase using visual c++ 6.0, which is an object-oriented language. And the developed program proved that it maintained a difference of less than 3mm over the short baseline of 1.5m or shorter when compared with other commercialized programs.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2003.04a
• /
• pp.88-93
• /
• 2003

국토공간정보의 기반인 수치지도 제작을 위해서는 위치에 대한 정확한 정보가 요구되며 이러한 정보는 GPS를 이용한 방법이 대표시 되고 있다. 우리나라도 GPS를 이용한 위치결정 방법의 효율성과 정확성을 확보하기 위해 전 국토에 걸쳐 24시간 위성데이터를 취득할 수 있는 70여개의 GPS 상시관측소를 설치 운영하고 있다. 따라서 본 연구는 GPS 상시관측소 데이터의 효과적인 활용 방안을 모색하기 위해 행정자치부와 국리지리원에서 설치 운영하며 호남권에 위치한 5곳의 상시관측소를 대상으로 각기 고정위치를 달리하여 기선해석과 망조정을 수행하여 고정위치에 따른 3차원 절대좌표의 정밀도를 분석하였다. 현재 행정자치부의 3곳의 상시관측소 절대위치는 고시되지 않아 국립지리원 고시 성과를 기준으로 고시성과와 계산성과의 3차원 절대 좌표를 비교하였다.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.3-6
• /
• 2007

The GPS baseline processing and the network adjustment was required a preliminary classification and check for effective work because the observation data of GPS $3^{rd}$ order control points are enormous attain to about 12,000 points. Particularly, in baseline processing and network adjustment a inaccuracy GPS antenna heights and point names yield a gross error or a S/W computation error. For the baseline processing of observation data, the related all materials were collected and were required a final check. The factor occurring a error, in GPS the baseline processing, were inspected variously after a checking observation data. Also, baseline processing method of GPS $3^{rd}$ order control points were commented and the analysis carry out a results with a experiment. The ellipsoidal distance and height of duplication baseline was compared between adjoin campaign areas for a accuracy analysis of baseline processing. According to the result, the mean is about 1cm for horizontal direction and about 2cm for vertical direction.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.19 no.3
• /
• pp.263-272
• /
• 2001

For a high resolution real-time kinematic GPS surveying using carrier phase, positioning accuracy according to the OTF initialization was better than 1 cm with more than 5-minute initialization within 20 km baseline. Also, it is recommended that measurements be carried out when PDOP and RDOP can be kept less than 4.0 since the geometrical layout of satellites has a great influence on the positioning accuracy. After considering the initial conditions and measuring time zone for real-time kinematic GPS. post-processed continuous kinematic GPS and real-time kinematic GPS measurements have been carried out. A new system has been proposed to store measured data by using a program developed to store GPS data in real time and to monitor the satellite condition through controller at the time of measurement. As a result, it has been revealed that possible noise in surveying could be corrected and the accuracy could be improved.