• Journal of Positioning, Navigation, and Timing
• /
• 제13권1호
• /
• pp.75-83
• /
• 2024

In order to reduce the time and cost of developing a navigation system, a performance evaluation platform can be used. A User Interface (UI) is required to effectively evaluate the performance, which sets parameters and gives navigation sensor signals and data display, and also displays navigation results. In this paper, a LabVIEW-based UI design method for multi-integrated navigation systems is proposed and implementation results are presented. The UI consists of a signal and data generation part and a signal and data processing part. The signal and data generation part sets parameters for the signal and data generation and displays the navigation sensor signal and data generation results. The signal and data processing part sets parameters for the signal and data processing and displays the navigation results. The signal and data generation part and signal and data processing part are designed to satisfy the requirements of the UI for a performance evaluation of the navigation system. In order to show the usefulness of the proposed UI design method, parameters of the signal and data generation and the signal and data processing are set through the LabVIEW-based UI, and the Global Positioning System (GPS) signal and inertial measurement unit data generation results and the navigation results of a GPS Software Defined Receiver (SDR) and inertial navigation system are confirmed. The implementation results show that the proposed UI design method helps users conduct an effective performance evaluation of navigation systems.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.2
• /
• pp.255-260
• /
• 2006

Safety-critical navigation systems have to provide 'reliable' position solutions, i.e., they must detect and exclude measurement or system faults and estimate the uncertainty of the solution. To obtain more accurate and reliable navigation systems, various filtering methods have been employed to reduce measurement noise level, or integrate sensors, such as global navigation satellite system/inertial navigation system (GNSS/INS) integration. Recently, particle filters have attracted attention, because they can deal with nonlinear/non-Gaussian systems. In most GNSS applications, the GNSS measurement noise is assumed to follow a Gaussian distribution, but this is not true. Therefore, we have proposed a fault detection and exclusion method using particle filters assuming non-Gaussian measurement noise. The performance of our method was contrasted with that of conventional Kalman filter methods with an assumed Gaussian noise. Since the Kalman filters presume that measurement noise follows a Gaussian distribution, they used an overbounded standard deviation to represent the measurement noise distribution, and since the overbound standard deviations were too conservative compared to the actual distributions, this degraded the integrity-monitoring performance of the filters. A simulation was performed to show the improvement in performance of our proposed particle filter method by not using the sigma overbounding. The results show that our method could detect smaller measurement biases and reduced the protection level by 30% versus the Kalman filter method based on an overbound sigma, which motivates us to use an actual noise model instead of the overbounding or improve the overbounding methods.

• International Journal of Aeronautical and Space Sciences
• /
• 제14권4호
• /
• pp.369-378
• /
• 2013

This paper presents a vision/LiDAR integrated navigation system that provides accurate relative navigation performance on a general ground surface, in GNSS-denied environments. The considered ground surface during flight is approximated as a piecewise continuous model, with flat and slope surface profiles. In its implementation, the presented system consists of a strapdown IMU, and an aided sensor block, consisting of a vision sensor and a LiDAR on a stabilized gimbal platform. Thus, two-dimensional optical flow vectors from the vision sensor, and range information from LiDAR to ground are used to overcome the performance limit of the tactical grade inertial navigation solution without GNSS signal. In filter realization, the INS error model is employed, with measurement vectors containing two-dimensional velocity errors, and one differenced altitude in the navigation frame. In computing the altitude difference, the ground slope angle is estimated in a novel way, through two bisectional LiDAR signals, with a practical assumption representing a general ground profile. Finally, the overall integrated system is implemented, based on the extended Kalman filter framework, and the performance is demonstrated through a simulation study, with an aircraft flight trajectory scenario.

• 한국항공우주학회지
• /
• 제38권3호
• /
• pp.236-242
• /
• 2010

위성항법시스템과 INS가 결합된 항법 시스템은 가용 위성이 없는 경우 항법 정보를 제공하지 못하는 단점이 있다. 이러한 단점을 극복하기 위해 비전센서를 결합한 항법 시스템이 대안으로 사용되지만, 일반적으로 특징점만 사용하여 항법을 수행하므로 가관측성이 부족한 문제점이 존재한다. 이때 사전에 위치가 알려져 있는 랜드마크를 추가적으로 사용하면 특징점만 이용하는 경우에 비해 가관측성을 향상 시킬 수 있다. 본 논문에서는 추가적인 랜드마크를 사용하는 경우에 대하여, TOM/SOM 분석과 고유치 분석을 통해 가관측성 향상 정도를 분석하였다. 시뮬레이션 결과 특징점만 사용하는 경우 항상 가관측성이 부족하나 랜드마크를 사용하는 경우 2번째 갱신과정 이후에는 완전 가관측한 특성을 보였다. 따라서 랜드마크를 사용하면 가관측성이 향상되므로 전체 시스템 성능을 향상시킬수 있다.

• 전기학회논문지
• /
• 제63권9호
• /
• pp.1273-1280
• /
• 2014

This paper considers a GPS anti-spoofing problem. Spoofing is an intentional interference that mislead the GNSS receiver. The spoofing attack is very significant since the target receiver is not aware of being attacked from spoofing. Accelerometers can be used to detect the spoofing signal by being compared with the acceleration obtained from GPS information using Kalman filter. In this paper we propose an N by N-point average and M-point window algorithm to detect GPS spoofing by using accelerometers and GPS outputs. The performance of the proposed algorithm is analyzed using actual vehicle trajectory and spoofing trajectory generated from INS and GPS toolbox for simulation.

• 제어로봇시스템학회논문지
• /
• 제17권2호
• /
• pp.183-189
• /
• 2011

An alignment algorithm for strapdown inertial navigation systems is proposed, in which the psi angle error model is utilized. The proposed alignment algorithm is derived from the Psi angle error model which has been widely used in real-time navigation systems. The equation for expecting steady state alignment error is also derived. The proposed algorithm was verified through real-time experiments. Experimental results show that the proposed algorithm can be used in the inertial navigation system and GNSS/INS integrated navigation system to get an initial attitude of the vehicle.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 춘계학술대회
• /
• pp.144-147
• /
• 2010

본 연구에서는 실내의 활동추적 시스템을 위해 가속도센서와 지자계 센서를 이용하여 외부로부터 독립적인 소형의 관성항법장치를 제안하였다. 기존의 실내 위치추적은 주로 GNSS(global navigation satellite system)의 정보를 가져와 실내 환경에 맞게 초음파와 RSSI(received signal strength indicator)등을 이용하여 구성한 경우가 연구되었으나 이러한 위성항법은 좌표 값이 미리 저장된 고정 노드가 필수적이라는 단점이 있다. 따라서 본 연구에서는 실내 환경과 같이 이동거리가 길지 않으며, 기존 환경 및 외부로부터의 영향에서 자유로운 관성항법을 이용한 실내 활동추적시스템을 제안하였다. 이를 위해 지자계 센서와 3축 가속도 센서를 사용한 신호 계측부와 Zigbee기반의 무선 센서 네트워크를 이용한 무선 전송부를 구성하였으며, 계측된 데이터의 분석으로부터 실내 위치추적의 가능성을 평가하였다.

• 품질경영학회지
• /
• 제49권1호
• /
• pp.1-15
• /
• 2021

Purpose: The purpose of this study was to propose a sensor fusion algorithm that integrates vehicle motion sensor(VMS) into the hybrid navigation system. Methods: How to evaluate the navigation performance was comparison test with the hybrid navigation system and the sensor fusion method. Results: The results of this study are as follows. It was found that the effects of the sensor fusion method and α value estimation were significant. Applying these greatly improves the navigation performance. Conclusion: For improving the reliability of navigation system, the sensor fusion method shows that the proposed method improves the navigation performance in a combat vehicle.

• 한국항행학회논문지
• /
• 제24권3호
• /
• pp.198-204
• /
• 2020

본 논문에서는 GNSS (global navigation satellite system)이 가용하지 않는 상황에서 시간이 지남에 따라 오차가 누적되는 특성을 가진 관성항법장치(inertial navigation system)의 항법 오차를 보상하기 위한 EM-Log (electromagnetic-log) 보정항법 필터를 설계하였다. EM-Log는 해상에서 운동체의 이동 속도를 측정하여 속도 오차를 보정하여 주나 측정된 속도에는 해조류가 포함되어 있기 때문에 적절한 해조류 모델 설계와 추정이 필요하다. 본 논문에서는 해조류 추정을 위해 단일 모델 필터와 IMM (interacting multiple model) 모델 필터 방법론을 제시하고 설계된 필터의 해조류 추정 성능을 확인한 후 해조류 모델 설계가 필터 성능에 어떤 영향을 주는지 분석하였다. 설계된 보정항법 필터의 성능은 시뮬레이션을 이용하여 검증하고 순수항법 대비 필터 성능 향상률을 비교 분석하였다. 단일 모델 필터는 해조류 모델이 동일한 경우 성능이 좋지만 해조류 모델이 동일하지 않을 경우 성능이 저하되는 것을 확인 할 수 있었다. 반면, IMM 모델 필터의 경우 다양한 해조류 모델을 사용하기 때문에 단일 모델필터 대비 안정적인 성능을 유지하는 것을 확인하였다.

• 한국군사과학기술학회지
• /
• 제20권1호
• /
• pp.25-32
• /
• 2017

Most of weapon systems use aided navigation system which integrates inertial navigation and aiding sensors to compensate the INS errors increasing with the passage of time. Various aid sensors can be applied such as Global Navigation Satellite System (GNSS), radar, barometer, etc., but there might exist time delay caused by signal processing or transferring aid information. This time delay leads out-of-sequence measurements (OOSM) systems. Previously, optimal and suboptimal measurment update method for OOSM systems, where the time delay length are known, are proposed. However, previous algorithm does not guarantee the positive definite property of covariance matrix. In order to improve numerical stability for aided navigation using delayed-measurement, this paper proposes a new measurement covariance update algorithm be similar to Joseph-form in Kalman filter. Futhermore, we propose how to implement it in indirect feedback Kalman filter structure, which is commonly used in aided navigation systems, for time-delayed measurement systems. Simulation and vehicle test results show effectiveness of a proposed algorithm.