• 대한조선학회논문집
• /
• 제52권3호
• /
• pp.187-197
• /
• 2015

This study aims the development of a semi-analytic method for the parametric roll of large containerships advancing in longitudinal waves. A 1.5 Degree-of-Freedom(DOF) model is proposed to account the change of transverse stability induced by wave elevations and vertical motions (heave and pitch). By approximating the nonlinearity of restoring moment at large heel angles, the magnitude of roll amplitude is predicted as well as susceptibility check for parametric roll occurrence. In order to increase the accuracy of the prediction, the relationship between righting arm(GZ) and metacentric height(GM) is examined in the presence of incident waves, and then a new formula is proposed. Based on the linear approximation of the mean and first harmonic component of GM, the equation of parametric roll in irregular wave excitations is introduced, and the computational results of the proposed model are validated by comparing those of weakly nonlinear simulation based on an impulse-response-function method combined with strip theory. The present semi-analytic doesn’ t require heavy computational effort, so that it is very efficient particularly when numerous sea conditions for the analysis of parametric roll should be considered.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.385-386
• /
• 2008

Dynamic stability of the vehicle rearview mirror is an important factor for the driver's visual perception (image blur) when driving down the road and regarded as one of the vehicle level N&V performance of visible component vibration. Several projects within GM identified a set of objective metrics and validation methods that can replace current existing subjective evaluation of mirror stability. This paper presents objective evaluation results for assessing dynamic stability (angle of rotation) of the vehicle rearview mirrors using both in-lab FRF measurements and on-road testing.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.387-388
• /
• 2008

Finding reasonable flexural modes from the full vehicle modal testing has always been a difficult job to N&V engineers due to FRF inconsistency, nonlinearity, heavy damping and, in many cases, interactions between global body structural modes and massive isolate/non-isolated subsystem modes. This paper provides a brier overview of the mode map validation using single-run FRF measurement with highly sensitive accelerometers fur the full vehicle modal analysis and then it can be used to characterize the vehicle's global/local vibration performances, especially customer perceived "structural feel" typically below 40Hz.

• 한국융합학회논문지
• /
• 제8권5호
• /
• pp.1-11
• /
• 2017

$H_{\infty}$ 제어와 뮤-합성 제어 방법을 사용하여 두 가지 상황, 즉 불확실성이 포함되지 않았을 때와 20% 불확실성이 포함되었을 때, 하에서 스프링-매스-댐퍼 시스템의 진동을 최소화하였다. 두 컨트롤러의 안정성 및 성능 파악을 위해 GM와 PM 값을 사용하여 분석되었다. 중앙 수치 미분법과 RMS 방법을 사용하여 출력 응답의 신호 강도가 비교되었다. 끝으로, 안정성 비교를 위하여 3가지 다른 $W_{per\;f1}$ 가중함수의 경우에 대해 총 40개의 $H_{\infty}$ 제어기와 뮤-합성 제어기 무작위 표본이 생성되었다. 전반적으로, 40개 플랜트 모델에서 얻어진 결과 값의 견고한 안정성과 성능 값에 따르면, 뮤-합성 제어기가 $H_{\infty}$ 제어기보다 진동 관리에 효과적임이 입증되었다.

• 한국자동차공학회논문집
• /
• 제19권1호
• /
• pp.139-146
• /
• 2011

In present study, it aims to compare the noise and vibration characteristics between magnesium alloy and steel hood panel. The AZ31 magnesium hood panel was fabricated through warm forming process, and the noise and vibration characteristics between both hood panels was compared through the measurement of engine radiation noise and transmission loss, as well as FRF on modal analysis. The sound insulation performance of magnesium alloy was wholly superior to that of steel hood panel, even though the transmission loss of magnesium alloy is lower than that of steel due to mass effect primarily. The FRF characteristics on modal analysis indicates that the resonance frequency of magnesium hood panel is remarkably increased to higher value than that of steel hood panel. The radiation and interior noise of magnesium panel even without acoustic hood insulation were remarkably lower than those of steel hood panel with acoustic insulation, in particular, at a range below 4,000 rpm.

• 대한조선학회논문집
• /
• 제49권1호
• /
• pp.60-67
• /
• 2012

This study considers the numerical analysis on parametric roll for container ships. As a method of numerical simulation, an impulse-response-function approach is applied in time domain. A systematic study is carried out for the parametric roll of two container ships, particularly observing the sensitivity of computational results to some parameters which can affect the analysis of parametric roll. The parameters to be considered are metacentric height (GM), simulation time window, and the discretization of wave spectrum. Based on the result of parametric roll simulation, numerical sensitivity and uncertainty in computational analysis are discussed.

• Journal of Advanced Marine Engineering and Technology
• /
• 제40권3호
• /
• pp.235-239
• /
• 2016

복원력을 잃고 선박이 전복될 때의 횡경사 속도는 선체가 사고 상황에 대해 외부로 표현하는 고유 응답의 하나가 된다. 자유 횡요 시 횡운동은 횡관성모멘트와 GM 및 횡감쇠계수와 같은 선체계수에 의해 나타낼 수 있으나 선체가 저속으로 진행되는 전복의 경우에는 각가속 성분이 특히 작아지므로 특성 해석은 보다 용이해진다. 따라서 빠르게 진행되는 전복사고에 비해 저속 전복 사고는 선체 거동의 예측이 적절히 가능할 뿐 아니라 선박구조에 필요한 시간의 확보가 수월해지므로 선박의 구조전략 측면에서 저속 전복사고는 별도로 분류하여 대응할 필요가 있다. 이를 위해 본 연구에서는 선체의 자유 횡운동에 대한 선형미분방정식을 토대로 저속 전복 시 선체계수들이 전복속도에 미치는 영향을 관련된 함수들로 나타내었으며 횡운동 진폭감쇠비를 기준으로 횡감쇠계수 크기와 선체 특성을 분석하였다. 또한, 여기에서의 수식적 관계를 실제 선박의 제원에 적용함으로써 얻어지는 결과들을 통해 제시된 저속 전복 선박의 일반적 특성이 도시적으로 설명될 수 있음을 확인하였다.