• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.2
• /
• pp.136-144
• /
• 2005

GIS analyzes various topographic feature in three dimensions using triangulated irregular network (TIN). This paper proposed a method that can analyze topographic features effectively in three dimensions. Method developed in this study can calculate earth-volume, the inundation volume, storage volume etc, effectively. We could reduce error than existing volume calculation methods in computing volume in addition to water level's change about each. Also, the develop method can improve accuracy in measuring the storage of reservoirs. Main result of this paper id to develop a efficient calculation method using contour and elevation data on digital map.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.13 no.3
• /
• pp.237-244
• /
• 2001

The watershed information of the Mankyung River and Dongjin River is obtained and analysed using the GIS tool. The informations i.e., digital map, land use, point sources, weather station, water quality measurement station, and pollutants load unit are managed by DB system. The slope, rainfall, and generated pollutants loads of COD, TN and TP which are the input data of the rainfall-runoff-pollutants load model are estimated. From the analysis of the collected and generated data, the almost watershed area is composed of agricultural lands except the upstream regions. The population and industrial area are densely located in Cheonju City and Iksan City, whereas the farming areas are widely distributed.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.6_1
• /
• pp.439-446
• /
• 2013

This paper is about assessment of soil loss in irrigation reservoir based on GIS. Natural disaster caused by soil loss whose natural incidence has been rapidly reduced due to successful tree planting campaign shows high potential risk, since the latest localized heavy rain resulted from extreme weather event and artificial land development acts as direct factors for land disaster. To prevent it, various techniques and technologies have been used to predict effect of soil loss. However, reliability of techniques and technologies to predict its effect precisely is relatively low so far because the natural disaster by soil loss is taken place by complicated interaction between possible factors and direct factors. Geospatial approach is essential to examine these interactions. In this regard, this study will provide detailed plan to improve prediction reliability for soil loss of irrigation reservoir, using GIS that has Hydrologic -Topographical parameter and digital map as its input parameters.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.4 no.4 s.15
• /
• pp.35-42
• /
• 2004

Accurate classification of water area is a preliminary step to analyze the flooded area and damages caused by flood. This is essential process for monitoring the region where annually repeating flood is a problem. The accurate estimation of flooded area can ultimately be utilized as a primary source of information for the policy decision. In this paper, flooded areas was classified using 1:25,000 land use map and a RADARSAT image of Ok-Chun and Bo-Eun located in Chung-Book province taken in 12th of August, 1998. Then we analyzed the flood area based on GIS. A RADARSAT image was used to classify the flooded areas with slope theme generated from digital elevation model. In processing on a RADARSAT image, the geometric correction was performed by a backwardgeocoding method based on ephemeris data and one control point for near real time flood area analysis.

• Journal of Korean Society for Geospatial Information Science
• /
• v.14 no.1 s.35
• /
• pp.29-36
• /
• 2006

In the process of location selection, it is assumed that transformer substation socially recognized as a dangerous facility require especially more rigorous and resonable process. This paper implements suitability analysis for optimum location selection of transformer substation in southern Gyeonggi province using AHP(Analytic Hierarchy Process) and spatial analysis of GIS in terms of safety, national land use, economical efficiency and environment preservation. To do this, necessary data from 1/5,000 digital map are extracted a s raster format for suitability analysis and a field investigation also was done. In the procedure of site selection, three candidate zones with 1.5km radius were selected for the whole research area and then through field survey low transformer sites were selected from candidate zones. In the last the appropriateness of selected sites was evaluated. The results of the suitability analysis showed that the first candidate site satisfied the location condition best and other candidate sites generally showed good location condition.

• Spatial Information Research
• /
• v.23 no.5
• /
• pp.75-85
• /
• 2015

Recently deformed or destroyed of soundproof wall by local winds and typhoon has increased. This research proposed the estimation method of the design wind load of soundproof wall using spatial information analysis based on 1:5,000 digital map and performed comparative analysis with actual application cases. According to the result of quantitative evaluation using GIS, the surface roughness in the downtown area packed with buildings was III and the surface roughness in the suburban district with a relatively small number of buildings was II and the surface roughness in the district packed with open areas and typical farmhouses was I. This shows that the wind load of the soundproof walls reflecting the actual surface conditions was estimated. If the quantitative GIS analysis presented in this study is applied to wind-resistant design of soundproof walls, it is supposed that this will be helpful in more rational wind-resistant design by remedying the existing problem in which the wind load varies depending on designer's subjectivity.

• Journal of Korean Society of Forest Science
• /
• v.94 no.6
• /
• pp.481-487
• /
• 2005

In this study, a GIS model to simulate the behavior of surface forest fires was developed on the basis of forest fire growth prediction algorithm. This model consists of three modules for data-handling, simulation and report writing. The data-handling module was designed to interpret such forest fire environment factors as terrain, fuel and weather and provide sets of data required in analyzing fire behavior. The simulation module simulates the fire and determines spread velocity, fire intensity and burnt area over time associated with terrain slope, wind, effective humidity and such fuel condition factors as fuel depth, fuel loading and moisture content for fire extinction. The module is equipped with the functions to infer the fuel condition factors from the information extracted from digital vegetation map sand the fuel moisture from the weather conditions including effective humidity, maximum temperature, precipitation and hourly irradiation. The report writer has the function to provide results of a series of analyses for fire prediction. A performance test of the model with the 2002 Chungyang forest fire showed the predictive accuracy of 61% in spread rate.

• Spatial Information Research
• /
• v.5 no.1
• /
• pp.43-59
• /
• 1997

There are currently more than tens of thematic maps in Korea. Among them, there are some thematic maps which are used by one organization only by which was made, and there are common thematic maps which are used by several organizations. In this study, among many kinds of common thematic maps which are currently used, the common thematic maps which will be digitized for parts of NGIS project were chosen and the priority of project was established. After selecting five maps from the common thematic maps classified as the first ranking, current land use map, parcel-address map, administrative boundary map, urban planning map and road map, the area of CheJoo Island was digitized as a pilot project. Through the pilot project of CheJoo Island, the level of application was verified, and the method was presented in order to reduce the trial and error in the process of this production after analyzing the matter from the pilot project. The direction for digitizing common thematic maps was presented based on the result of the pilot project, in addition to, the detail plan was established after deciding the number of people needed, the amount of money spent, and the period needed for making digital maps nationwide.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.2
• /
• pp.157-163
• /
• 2007

Recently, industrialization of a country is accelerated and request of society infrastructure is raised so national land development is activity view. Accordingly, the search for a wide-ranging buried heritage do acted in large construction region. Because the buried heritage get buried in land that it is necessary to the precision search and research for a record and a preservation. Until now, Surveying techniques of a historic site have made status map, profile and cross section map through leveling survey, total-station survey and sketch of specialist. So, to solve problems existing relic survey or drawing making method have using digital camera these researches rapidly and economically obtain stereo image of object and present a technique that constructs 3D image model for digital photogrammetry method. Also, these researches construct 3D image model for record and preservation of a historic site through site test and in 3D and graphical express a historic site and support works that produce other maps if we need it. offer base data of GIS (Geographic Information System) to collect and analyze overall, information of a historic site.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.3
• /
• pp.85-92
• /
• 2016

Slope is one of the most important factor in land development permission standards. In guideline of "Land Suitability Assessment" or "Forest Land Conversion Standard", average slope can be measured using digital map and GIS for target area. Inputs in slope calculation are 1/5,000 digital map of NGII(National Geographic Information Institute) or digital information of Korea Land Information System. Many confusions occur in the field, as there is no standard for slope calculation and are lots of slope calculation methods using contour lines or DEM derived from them. Avoiding these confusions, this study was intended to propose a standardized method for slope calculation and a selection method for a suitable resolution. In this study, using DEM of optimum grid size according to the complexity of topography with finite difference method is suggested as improved slope calculation method, after comparing several representative slope calculation methods.