• Korean Journal of Medicinal Crop Science
• /
• v.6 no.3
• /
• pp.176-180
• /
• 1998

This experiment was conducted to investigate processing method and usage of dried yam, "Sanyak". Jujube showed the higher value in extract, brix and extract content compared with Danggui and Sanyak. Mixing of Sanyak with Jujube and Danggui was proper to raise extract and taste. Brix and extract content was $1.17^{\circ}$ and 1.80% higher, respectively, in 12 hours of extraction than in 8 hours of extraction. The apt mixing ratio was 3 : 4 : 3 (Sanyak : Danggui : Jujube). By adding 70% of glucose and 10% of lactose to 20% of extract, good viscosity and appearance of paste were obtained. 1.5mm of granule thickness was proper in phase of manufacturing, drying and shaping.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.2
• /
• pp.66-75
• /
• 1993

Flow control devices, such as flow liners, are frequently introduced hi a cavitation tunnel in order to reduce the tunnel blockage effect, when a three-dimensional wake distribution is simulated using a complete ship model or a dummy model. In order to estimate the tunnel wall effect and to evaluate the effect of flow liners on the simulated wake distribution, a surface panel method is adopted for the calculation of the flow around a ship model and flow liners installed in a rectangular test section of a cavitation tunnel. Calculation results on the Sydney Express ship model show that the tunnel wall effect on the hull surface pressure distribution is negligible for less than 5% blockage and can be appreciable for more than 20% blockage. The flow liners accelerate the flow near the after body of the ship model, so that the pressure gradient there becomes more favorable and accordingly the boundary layer thickness would be reduced. Since the resulting wake distribution is assumed to resemble the full scale wake, flow liners can also be used to simulate an estimated full scale wake without modifying the ship model. Boundary layer calculation should be incorporated in order to correlate the calculated wake distribution with tole measured one.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.3
• /
• pp.269-275
• /
• 2020

In this study, flexural tests of precast concrete panels according to the thickness of cross-sectional and the with or not of reinforcement were carried out in order to develop and assess of a lightweight precast concrete panel using ultra high performance concrete. For the test, four panels were fabricated, and consisted of one normal concrete panel and three ultra high performance concrete panels. As a test result, it was found that the plain precast panel using ultra high performance concrete had a lower flexural performance than the reinforced normal concrete panel, regardless of the cross-sectional size. The flexural performance of the hollow-sectional precast panel applying ultra high performance concrete, is improved by 150% compared to that of the reinforced normal concrete panel. That is, through additional performance verification and optimization of the cross-sectional design of the panel, the ultra high performance concrete precast panel can be made lighter. Also, the practical use of lightweight precast panels with ultra high performance concrete can be available through evaluation on shear, joint connection and anchoring, etc.

• Korean Chemical Engineering Research
• /
• v.51 no.4
• /
• pp.476-481
• /
• 2013

Ethylbenzene (EB) which has a similar physical properties with p-xylene (pX) was separated from EB/pX mixture by using MFI-type zeolite (TS-1, ZSM-5, and Silicalite-1) coated membranes. The zeolites were synthesized by microwave method to reduce the synthesis time and uniformly formed zeolite particles were coated on the ${\alpha}$-almina tubular support with a thickness of $3-4{\mu}m$. Separation factor and permeation flux of the synthesized zeolite coated membranes were measured to survey the best performance of ethylbenzene separation from different composition of EB/pX mixtures. When the EB/pX mixture of 5:5 molar ratio applied for the separation experiment, it represented the highest separation factor. We also have studied about the effect of the atomic composition of zeolites on the separation performance within the temperature range from 160 to $220^{\circ}C$. TS-1 showed the highest permeation flux of $1,666mol/m^{2*}s^*Pa$ and Silicate-1 showed the highest separation factor of 1.73 at $200^{\circ}C$ respectively.

• Journal of the East Asian Society of Dietary Life
• /
• v.26 no.1
• /
• pp.25-33
• /
• 2016

The study was performed to investigate the effects of whey protein-rich meal substitute added with vitamins, minerals, and lactobacillus powder probiotics on weight loss, body fat, and body composition in 24 female volunteers for 4 weeks. Whey protein-rich meal substitute was consumed with low-fat, high calcium milk (1% fat, 260 mg/200 mL) twice a day. Subjects submitted 3-day diet records and a life-style questionnaire before the study. During the study, subjects were required to turn in a diet record every day and consume the meal substitute formula in the metabolic ward at C university for 4 weeks. Anthropometric measurements were carried out weekly by Inbody 7.0. The dietary intake and anthropometric data were analyzed to compare changes before and after the study by paired t-test with SPSS version 23.0. The subjects were mostly early 20's and either overweight or obese and highly motivated to lose weight. Most of the subjects consumed three meals per day regularly and spent mostly 10~15 minutes for a meal. Their caloric intake was relatively low and decreased from 1,360 kcal at week 0 to 1,100 kcal after 4 weeks. However, total protein intake increased while carbohydrate and fat intakes decreased (p<0.05) after the trial. Nine vitamin intakes after the study improved compared to those before the study (p<0.05). After the study, subjects showed lower body weight (-1.8 kg), body fat (-0.94 kg), percent body fat (-0.86%), as well as waist circumference (-4.52 cm), hip circumference (-0.44 cm), waist hip ratio (-0.05), and triceps skinfold thickness (-2.39 mm) compared to those at week 0 (p<0.05). Muscle mass tended to be less compared to week 0, although there was no significant differences between weeks 0 and 4. In conclusion, diet trial with whey protein-rich meal substitute induced weight loss and positively changed body fat parameters and body composition.

• Journal of the Korean Geophysical Society
• /
• v.2 no.3
• /
• pp.209-216
• /
• 1999

In order to get geologic information necessary for underground installation of water pipe, seismic refraction profiling was applied to the southwest side of the Seomjin River which flows between Namwon-gun, Cholabuk-do and Gokseong-gun, Cholanam-do. Before obtaining the in-line refraction data, walkaway data were recorded with 1 m geophone interval and -36∼+36 m offset range. From the walkaway data, it is interpreted that a dry soil layer with the average velocity of 585 m/s covers wet sediments with the average velocity of 1,326 m/s. The second layer overlies basements nearly horizontally with the average velocity of 4,218 m/s. Refraction profiling of 220 m long with the geophone interval of 2 m is interpreted with the Generalized Reciprocal Method (GRM). Three layers are identified with average velocities of 688 m/s, 1,473 m/s, and 3,776 m/s, respectively. The depth to the bedrock impossible for ripping ranges between two extremes, 1.51∼2.43 m and 2.25∼3.54 m, depending upon thickness of the hidden layer. A typical shortcoming of refraction method, the hidden layer problem, prevents accurate estimation in depth of the second layer.

• Korean Journal of Food Science and Technology
• /
• v.36 no.2
• /
• pp.276-282
• /
• 2004

Barley flakes were developed by extrusion cooking using broken kernels, by-products of the barley pearling process. Broken kernels from both non-waxy and waxy barley broken kernels were sufficiently gelatinized at the barrel temperature of over $100^{\circ}C$ and the moisture content of broken kernels of over 35%. Cutting and flaking roll separating properties of pellets prepared from non-waxy barley broken kernels were better than those of waxy barley broken kernels. Characteristics of pellets prepared by extrusion cooking in different mixing ratios of non-waxy and waxy barley broken kernels were investigated. As the mixing ratio of waxy barley broken kernels increased, RVA peak viscosity, apparent viscosity, and yield stress of prepared pellets decreased, while flow behavior index increased. As the mixing ratio of waxy barley broken kernels increased, compressive strength and bulk density of deep-fat fried flakes drastically decreased, and the size of air cells on cross-section increased, and thickness of cell-constituting bodies decreased. Sensory evaluation results showed that acceptability for texture and taste of flakes inclosed as the mixing ratio of waxy barley broken kernels increased, and optimum mixing level of waxy barley broken kernels appeared to be 30-40%.

• Journal of Animal Science and Technology
• /
• v.50 no.3
• /
• pp.363-372
• /
• 2008

To investigate the effects of total mixed ration(TMR) on growth performance and carcass characteristics of Hanwoo steers, sixty steers were randomly assigned to one of four treatment groups; separate feeding of concentrate and rice straw(control), wet TMR(TMRⅠ), dry TMR with 20%(TMRⅡ) and 40%(TMRⅢ) barley bran from 6 to 28 month of age. In growth performance, average daily gains of TMRⅡ group was the highest(0.70kg/day) but significant differences between treatments were not found(p>0.05). Average feed required for kg body weight gain of control group was 11.63kg. Those of TMRⅠ through TMRⅢ were 9.29, 10.46 and 10.71kg, respectively. Dressing percentage and retailed cut percentage were 59% and 63%, without any significant differences between treatments(p>0.05). There were no significant differences in rib-eye area, back fat thickness, meat color and fat color (p>0.05). Average marbling score was higher(p<0.05) in TMRⅠ than in control group.

• Ceramist
• /
• v.21 no.4
• /
• pp.378-387
• /
• 2018

The optimal fabrication conditions for $Gd_{0.1}Ce_{0.9}O_{2-{\delta}}$(GDC) buffer layer and $La_{0.6}Sr_{0.4}Co_{0.2}Fe_{0.8}O_{3-{\delta}}$ (LSCF) cathode on 1mol% $CeO_2-10mol%\;Sc_2O_3$ stabilized $ZrO_2$ (CeScSZ) electrolyte were investigated for application of IT-SOFCs. GDC buffer layer was used in order to prevent undesired chemical reactions between LSCF and CeScSZ. These experiments were carried out with $5{\times}5cm^2$ anode supported unit cells to investigate the tendencies of electrochemical performance, Microstructure development and interface reaction between LSCF/GDC/CeScSZ along with the variations of GDC buffer layer thickness, sintering temperatures of GDC and LSCF were checked, respectively. Electrochemical performance was analyzed by DC current-voltage measurement and AC impedance spectroscopy. Microstructure and interface reaction were investigated by scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS). Although the interfacial reaction between these materials could not be perfectly inhibited, We found that the cell, in which $6{\mu}m$ GDC interlayer sintered at $1200^{\circ}C$ and LSCF sintered at $1000^{\circ}C$ were applied, showed good interfacial adhesions and effective suppression of Sr, thereby resulting in fairly good performance with power density of $0.71W/cm^2$ at $800^{\circ}C$ and 0.7V.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.47 no.3
• /
• pp.237-245
• /
• 2021

Particulate matter and ultra-particle matters generally refer to very small floating dust, such as 1/6 to 1/7 and 1/20 to 1/30, respectively, compared to the thickness of human hair, and contain various types of heavy metal ions. In addition to breathing, particle matters (PM) that flows in through the gaps in the pores of the skin can induce health problems in the body's tissues and skin, so it must be removed by blocking the inflow or by washing. Through this study, we confirmed the possibility that heavy metal ions can be adsorbed and removed by using Oryza sativa (Rice) bran oil (OSBO). In addition, the cell viability is much higher than that of grain-derived components through cytotoxicity experiments, and the cytoprotective effect of an external stimulus source can be expected. It was confirmed that the expression amount of COL1A1 mRNA increased, and accordingly, it was believed that wrinkles that might be caused by moisture lost by heavy metal ions in fine dust could be alleviated. Based on the results of these experiments, we tried to present a cosmetics containing OSBO, which is a wash-off formulation, in order to finally remove heavy metals.