• 동력기계공학회지
• /
• 제19권6호
• /
• pp.47-53
• /
• 2015

Korea is the geographic location during the summer, the temperature rising to $35^{\circ}C$ and winter temperature is $-15^{\circ}C$ to reduce the air temperature changes, such as relatively large compared to other countries. This increase or decrease of the harmful exhaust gas discharged from automobile substantially inconvenience a significant impact on the active side of the car engine temperature and exhaust gas reducing device receives a large impact on the atmospheric temperature is regulation to be different. However, domestic vehicle emissions test temperature of $20{\sim}30^{\circ}C$ is it does not reflect this situation the actual test temperature to accurately measure the exhaust gas volume of the vehicle is difficult. In this study, domestic automobile exhaust gas test conditions of a test temperature $20{\sim}30^{\circ}C$ various temperatures, including (35, 25, 0, -7, -15, $-25^{\circ}C$) under the two vehicles (2.0L MPI, 2.4 L GDI) as was discussed with respect to the exhaust gas characteristics of the vehicle according to the ambient temperature gas. As a result, domestic emissions test temperature of $25^{\circ}C$ than average conditions were temperature decreases greenhouse gas emissions and increase overall increased by up to 15 times higher. Air temperature and the engine exhaust gas inconvenience a direct effect on the activation temperature required in the reduction unit is determined to be an increase of emissions and greenhouse gases, and also an increase in the variety of lubricants based lubricating and viscosity reduction, such as the engine oil due to the low temperature of these result It is considered that shows the.

• 대한기계학회논문집B
• /
• 제35권10호
• /
• pp.981-987
• /
• 2011

단기통 직접분사 가솔린엔진의 성층연소 조건에서 연소실험을 수행하였다. 각 분사압조건마다 실화가 발생하지 않는 성층연소가능 분사시기영역이 존재하였으며 이는 혼합기 형성과정의 분위기압에 따른 영향으로 판단하였다. 연소효율은 분사시기를 지각할수록 증가하며 32~28 CAD BTDC에서 최대값을 갖고 이후 감소하는 경향을 보였고 분사압이 높을수록 높은 연소효율이 나타났다. 이러한 연소효율의 경향은 IMEP와 다른 경향을 보였으며 그 이유는 높은 연소효율 조건에서 연소상이 진각되어 음의 일이 증가하였기 때문으로 판단된다. Smoke의 배출은 분사시기가 지각됨에 따라 증가하였으며 높은 분위기 압에서 국부적으로 농후한 영역이 증가하였기 때문으로 생각된다. NOx 배출도 분사시기를 지각함에 따라 감소하였으며 연소상의 지각으로 최대 연소실압력과 온도가 감소하였기 때문으로 생각된다.

• 한국소음진동공학회논문집
• /
• 제23권9호
• /
• pp.857-862
• /
• 2013

Recently, the importance of GDI and diesel engine noise reduction is required, so newly designed components very close to noise sources are added in order to maximize the sound absorbing performances. In this study, the high temperature resistant part made with meta-Aramid nonwoven, which was applicable for high temperature applications of about $200^{\circ}C$ or more, such as engines and exhaust systems, was developed. And three-dimensional shaped component was successfully fabricated, and it was observed high temperature resistance of $260^{\circ}C$, lightweight properties and the noise was decreased by 1.0 dB with 70 g of product.

• 동력기계공학회지
• /
• 제18권6호
• /
• pp.186-192
• /
• 2014

The spray structures under the stratified and homogeneous charge condition of a gasoline direct injection were investigated in a visualized constant volume chamber. The chamber pressure was controlled from 0.1 MPa to 0.9 MPa by the high pressure nitrogen and the chamber temperatures of $25^{\circ}C$, $60^{\circ}C$ and $80^{\circ}C$ were controlled by the band type heater. The fuel, iso-octane was injected by a 6-hole injector with the pressures of 7 MPa and 12 MPa. From the experiments results, it is confirmed that at lower chamber pressure, the penetration length and spray angle are mainly affected by the chamber temperature with the vaporization of the fuel droplets and generated vortices at the end region of the spray. And at higher chamber pressure, the penetration lengths at the end of the injection were about 50~60% of that at lower chamber pressure regardless of the chamber temperature and the effect of fuel injection pressure is larger than that of the chamber temperature which results from larger penetration lengths at higher fuel injection pressure than at lower fuel injection pressure regardless of the chamber temperatures.

• 한국분무공학회지
• /
• 제27권4호
• /
• pp.195-202
• /
• 2022

Recently, the global automobile market is rapidly changing from internal combustion engine vehicles to eco-friendly vehicles including electric vehicles. Among eco-friendly vehicles, LPG vehicles are low in fine dust and are suggested as a realistic way to replace diesel vehicles. In addition, it is more economical than gasoline in its class, showing a cost-saving effect. In Korea, the business of converting gasoline into LPG is active. Research is being conducted to apply this to hybrid vehicles. In this study, the difference in energy consumption efficiency was analyzed when LPG fuel was applied by selecting a 2-liter GDI hybrid electric vehicle. The operation of the hybrid system according to various driving characteristics was confirmed by selecting the WLTC mode. As a result, it was confirmed that the BSFC was about 5% lower than that of gasoline fuel when using LPG fuel. This is due to the active operation of the motor while driving. Optimization is required as battery consumption increases from an energy perspective.

• 한국응용과학기술학회지
• /
• 제33권4호
• /
• pp.824-835
• /
• 2016

2015년 기준 자동차 등록대수는 약 2,100만대를 넘어 1가구당 1.07대를 보유하고 있는 실정이나[1], 국내 자동차용 표준연료에 대한 기준은 부재한 상황이다. 자동차용 표준연료(reference fuel)는 차량의 연비와 배출가스를 인증하거나 새로운 자동차를 개발할 때 차량의 성능 등을 평가하기 위해 사용하는 연료를 의미한다. 현재 국내에는 차량의 배출가스, 성능, 연비시험 등을 위해 유통연료를 사용하고 있으며, 유통연료는 석유 및 석유대체연료사업법과 대기환경보전법 상의 품질기준을 만족하지만 각 제조사의 원료와 공정 등에 따라 연료의 물성차이가 있어 차량 시험 시 편차가 발생할 수 있다. 본 연구에서는 국내 유통되는 휘발유 품질모니터링 분석결과를 바탕으로 표준연료 기준(안)을 설정하고, GDI와 MPI 연료 분사 방식의 차량에 적용하여 비교 평가한 결과, 실제 유통연료를 사용했을 때 최대 3.8%까지 발생하는 연비차이가 1.1%까지 감소함을 확인할 수 있었다.