Browse > Article
http://dx.doi.org/10.3795/KSME-B.2011.35.10.981

Effect of Injection Pressure and Injection Timing on Combustion Characteristics of Spray-Guided Direct-Injection Spark-Ignition Engine under Lean Stratified Combustion Operation  

Oh, Hee-Chang (Dept. of Mechanical Engineering, Korea Advanced Institute of Science and Technology)
Lee, Min-Seok (Dept. of Mechanical Engineering, Korea Advanced Institute of Science and Technology)
Park, Jung-Seo (Dept. of Mechanical Engineering, Korea Advanced Institute of Science and Technology)
Bae, Choong-Sik (Dept. of Mechanical Engineering, Korea Advanced Institute of Science and Technology)
Publication Information
Transactions of the Korean Society of Mechanical Engineers B / v.35, no.10, 2011 , pp. 981-987 More about this Journal
Abstract
In this study, single cylinder engine experiment was carried out to investigate combustion characteristics spray guided direct injection spark ignition engine. In the result of engine experiment, it was shown that flammable window of injection timing was existed. The combustion efficiency increased with retarding injection timing, reaching a peak value, subsequent to decrease again. These results were likely due to the effect of ambient pressure on stratified-premixed mixture preparation. 150 bar injection pressure condition and retarded injection timing from the best combustion efficiency injection timing showed the highest IMEP value due to the advanced combustion phase of the maximum combustion efficiency condition. HC emission showed same trend of combustion efficiency, and smoke emission was increased as injection timing was retarded due to the increased locally rich area in the high ambient pressure. NOx emission showed decreasing trend as injection timing was retarded. This is likely due to the maximum in-cylinder temperature was decreased with retarded combustion phase.
Keywords
DISI; GDI; Gasoline Engine; Direct Injection; Spray Guided;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
Times Cited By SCOPUS : 0
연도 인용수 순위
1 Schwarz, C., Schunemann, E., Durst, B., Fischer, J. and Witt, A., 2006, "Potentials of the Spray-Guided BMW DI Combustion System," SAE Paper 2006-01- 1265.
2 Doll, G., Waltner, A., Lückert, P. and Kemmler, R., 2010, "The New 4.6 l V8 Gasoline Engine from Mercedes-Benz," ATZ, Vol. 71, pp. 12-19.
3 Kook, S., Bae, C., Miles, P. C., Choi D. and Reitz, R. D., 2007, "The Effect of Swirl Ratio and Fuel Injection Parameters on CO Emission and Fuel Conversion Efficiency for High-Dilution, Low- Temperature Combustion in an Automotive Diesel Engine," SAE paper 2007-01-0197.
4 Oh, H., Bae, C. and Min, K., 2010, "Spray and Combustion Characteristics of Ethanol Blended Gasoline in a Spray Guided DISI Engine under Lean Stratified Operation" SAE Paper 2010-01-2152.
5 Heywood, B., 1989, "Internal Combustion Engine Fundamentals," Mcgrawhill.
6 Lee, S., Jeong, K., Jeon C. and Chang, Y., 2005, "A Study on the Comparison of the Combustion Characteristics among an IDI, a HSDI Diesel Engine and a SI Engine using One-zone Heat Release Analysis," Transactions of KSAE, Vol. 13, No. 6, pp. 21-30.   과학기술학회마을
7 Woschni, G., 1967, "A Universally Applicable Equation for Instantaneous Heat Transfer Coefficient int the Internal Combustion Engine," SAE Paper, 670931.
8 Koch, T., Schanzlin, K. and Boulouchos, K., 2002, "Characterization and Phenomenological Modeling of Mixture Formation and Combustion in a Direct Injection Spark Ignition Engine, SAE Paper 2002-01- 1138.
9 Zhao, F., Harrington, D. L. and Lai, M., 2002 "Automotive Gasoline Direct-Injection Engines" SAE
10 Brehob, D.D., Fleming, J.E., Haghgooie, M. and Stein, R. A., 1998, "Stratified-Charge Engine Fuel Economy and Emissions Characteristics," SAE Paper 982704.