• Journal of the Korean GEO-environmental Society
• /
• v.24 no.3
• /
• pp.23-27
• /
• 2023

Graphitic carbon nitride (g-C₃N₄) has been used as effective photocatalyst for degradation of antibiotics under visible light irradiation. However, the fast recombination of hole-electron pair may limit their photocatalytic efficiency. In our study, Ag was grafted on g-C₃N₄/g-C₃N₄ isotype heterojunction by a microwave-assisted decomposition method. The structure and physical properties of heterojunction photocatalyst were characterized through X-ray diffraction, UV-DRS, FT-IR, and Photoluminescence analyses. Ag decorated g-C₃N₄/g-C₃N₄ isotype heterojunction exhibited excellent photocatalytic activity for degradation of sulfamethoxazole under irradiation under visible light irradiation within 210 min, which is higher than g-C₃N₄/g-C₃N₄ isotype heterojunction and bulk g-C₃N₄. The addition of Ag may broaden the visible light absorption and restrict the recombination of hole-electron pair because of the surface plasmons resonance, resulting in the improving the photocatalytic activity.

• Journal of Life Science
• /
• v.8 no.1
• /
• pp.32-39
• /
• 1998

The length and G/C concent of regions of an aphid rDNA unit that spans 13,061bo with 59% G/C content. flolowing belowing below are the those results, 5’ETS is 843bp in length with 69% G/C content, 18S is 2,469bp in length with 59% G/C content, ITS I is 229bp in length with 70% G/C content, 5.8S is 160bp in length with 63% G/C content, ITS II is 325bp in length with 70% G/C content, 28S is 4, 147bp in length with 60% G/C content, IGS is 4,888bp in length with 55% G/C content.

• Journal of the Korean Ceramic Society
• /
• v.53 no.4
• /
• pp.393-399
• /
• 2016

We have successfully fabricated 3D (3-dimensional) nanostructures of $TiO_2$ coated with a $g-C_3N_4$ layer via hydrothermal and sintering methods to enhance photoelectrochemical (PEC) performance. Due to the coupling of $TiO_2$ and $g-C_3N_4$, the nanostructures exhibited good performance as the higher conduction band of $g-C_3N_4$, which can be combined with $TiO_2$. To fabricate 3D nanostructures of $g-C_3N_4/TiO_2$, $TiO_2$ was first grown as a double layer structure on FTO (Fluorine-doped tin oxide) substrate at $150^{\circ}C$ for 3 h. After this, the $g-C_3N_4$ layer was coated on the $TiO_2$ film at $520^{\circ}C$ for 4 h. As-prepared samples were varied according to loading of melamine powder, with values of loading of 0.25 g, 0.5 g, 0.75 g, and 1 g. From SEM and TEM analysis, it was possible to clearly observe the 3D sample morphologies. From the PEC measurement, 0.5 g of $g-C_3N_4/TiO_2$ film was found to exhibit the highest current density of $0.12mA/cm^2$, along with a long-term stability of 5 h. Compared to the pristine $TiO_2$, and to the 0.25 g, 0.75 g, and 1 g $g-C_3N_4/TiO_2$ films, the 0.5 g of $g-C_3N_4/TiO_2$ sample was coated with a thin $g-C_3N_4$ layer that caused separation of the electrons and the holes; this led to a decreasing recombination. This unique structure can be used in photoelectrochemical applications.

• Current Applied Physics
• /
• v.18 no.11
• /
• pp.1458-1464
• /
• 2018

An improved method for the preparation of g-$C_3N_4$ is described. Currently, heating (> $400^{\circ}C$) of urea is the common method used for preparing the g-$C_3N_4$. We have found that sonication of melamine in $HNO_3$ solution, followed by washing with anhydrous ethanol, not only reduce the crystallite size of g-$C_3N_4$ but also facilitate intriguing electronic structure and photoluminescence (PL) properties. Moreover, loading of metal (Pt and Ag) nanoparticles, by applying the borohydride reduction method, has resulted in multicolor-emission from g-$C_3N_4$. With the help of PL spectra and local electronic structure study, at C K-edge, N K-edge, Pt L-edge and Ag K-edge by X-ray absorption spectroscopy (XAS), a precise mechanism of tunable luminescence is established. The PL mechanism ascribes the amendments in the transitions, via defect and/or metal states assimilation, between the ${\pi}^*$ states of tris-triazine ring of g-$C_3N_4$ and lone pair states of nitride. It is evidenced that interaction between the C/N 2p and metal 4d/5d orbitals of Ag/Pt has manifested a net detraction in the ${\delta}^*{\rightarrow}LP$ transitions and enhancement in the ${\pi}^*{\rightarrow}LP$ and ${\pi}^*{\rightarrow}{\pi}$ transitions, leading to broad PL spectra from g-$C_3N_4$ organic semiconductor compound.

• Applied Chemistry for Engineering
• /
• v.5 no.6
• /
• pp.1044-1055
• /
• 1994

The preparation of ZrC/SiC mixed powders from $ZrSiO_4/C$ and $ZrSiO_4/Al/C$ systems was attempted in the temperature range below $1600^{\circ}C$ under Ar or $Ar/H_2$ gas flow(100-500ml/min). The formation mechanism and kinetics of ZrC/SiC were suggested and the resultant powders were characterized. In $ZrSiO_4/C$ system, ZrC and SiC were formed by competitive reaction of $ZrO_2(s)$ and SiO(g) with carbon at temperature higher than $1400^{\circ}C$. The apparent activation energy for the formation of ZrC was approximately 18.5kcal/mol($1400-1600^{\circ}C$). In $ZrSiO_4/Al/C$ system, ZrC was formed by reaction of ZrO(g) with Al(l, g) and carbon at temperature higher than $1200^{\circ}C$, and SiC was formed by reduction-carbonization of SiO(g) with Al(l, g) and carbon at temperature higher than $1300^{\circ}C$. The products obtained at $1600^{\circ}C$ for 5h consisted of ZrC with lattice constant of $4.679{\AA}$ and crystallite size of $640{\AA}$, and SiC with lattice constant of $4.135{\AA}$ and crystallize size of $500{\AA}$. And also, the mean particle size was about $21.8{\mu}m$.

• Journal of Industrial and Engineering Chemistry
• /
• v.67
• /
• pp.28-51
• /
• 2018

Graphitic carbon nitride ($g-C_3N_4$) as a fascinating visible light active semiconductor photocatalyst has medium band gap, non-toxic nature, stable chemical structure and high thermal stability. Recently, intensive researches are focused on photocatalytic activity of $g-C_3N_4$ for wastewater treatment. This review demonstrates latest progress in fabrication of graphitic carbon nitride $C_3N_4$ incorporated nanocomposite to explore photocatalytic ability for water purification. The $g-C_3N_4$-based nanocomposites were categorized as $g-C_3N_4$ metal-free nanocomposite, noble metals/$g-C_3N_4$ heterojunction, non-metal doped $g-C_3N_4$, transition and post transition metal based $g-C_3N_4$ nanocomposite. Apart from fabrication methods, we emphasized on elaborating the mechanism of activity enhancement during photocatalytic process.

• Journal of Animal Science and Technology
• /
• v.54 no.1
• /
• pp.1-8
• /
• 2012

This study aimed to investigate the single nucleotide polymorphisms (SNPs) of the porcine MC4R gene and validate the effect of the MC4R genotype for marker assisted selection (MAS). Six amplicons were produced to analyze the entire base sequences of the porcine MC4R gene and six SNPs were detected (c.-780C>G, c.-135C>T, c.175C>T-Leu59Leu, c.707A>G-Arg236His, c.892A>G-Asp298Asn, and c.*430A>T). Linkage disequilibrium (LD) of the six SNPs was analyzed by performing haploid analysis. There was a perfect linkage disequilibrium in c.-780C>G, c.-135C>T, c.175C>T-Leu59Leu, c.707A>G-Arg236His, and c.*430A>T. Only the c.892A>G (Asp298Asn) SNP showed a very low LD with an $r^2$ value of 0.028 and the D' value of 0.348. As a result, the two SNPs-c.707A>G (Arg236His) and c.892A>G (Asp298Asn)-were selected to extract the genotype frequencies from the 5 pig breeds by using the polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) genotype analysis method. The SNP frequency of c.707A>G (Arg236His) indicated the presence of the A (His) allele only in Yorkshire, while the G allele was fixed in the KNP, Landrace, Berkshire, and Duroc. Association analysis was carried out in 484 pigs with the c.707A>G (Arg236His) SNP and the meat quality traits of four different pig cross populations: a significant association was noted in crude fat, sirloin moisture, meat color, and the degree of red and yellow coloration. The frequency of the c.892A>G(Asp298Asn) SNP genotype varied among the breeds; while Duroc showed the highest frequency of the A (Asn) allele, KNP showed the highest frequency of the G (Asp) allele. Association analysis was carried out in 1126 pigs with the c.892A>G (Asp298Asn) SNP and the meat quality traits of four pig populations: a highly significant linkage was noted in the back-fat thickness (P<0.002). It was found that the back-fat thickness was higher in individuals with the AA genotype than in those with the AG or GG genotype. Thus, in this study, we verified that the c.892A>G (Asp298Asn) SNP in the pig MC4R gene has a sufficient effect as a gene marker for MAS in Korean pork industry.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.1
• /
• pp.45-49
• /
• 2002

This study was conducted to enhance the value of chamnamul (Pimpinella brachycarpa (Komarov) $N_{AKAI}$) as an useful food resource. Hunter L, a, b values (lightness, redness, yellowness) of chamnamul leaf were 33.28$\pm$1.94, -10.98$\pm$0.74, 14.05$\pm$1.29 and shearing force was 2745.2g. Contents of tannin and dietary fiber were 100.9 mg%, 24.0% (freeze drying base). The minerals identified in chamnamul were Ca 7.85 g/kg, K 76.31 g/kg, Mg 4.78g/kg, Fe 0.35g/kg, Na 2.35 g/kg. Chamnamul kimchi was packed in polyethylene film (200g) and fermented at 2$0^{\circ}C$ and 4$^{\circ}C$. In color changes kimchi fermented at 2$0^{\circ}C$ showed more increase in Hunter L, a, b values than kimchi fermented at 4$^{\circ}C$. The pH of kimchi decreased and acidity increased with storage time at both temperature. Ascorbic acid contents decreased sharply with storage time. Loss of ascorbic acid contents was about 81.9% in kimchi fermented at 2$0^{\circ}C$ after 5 days, and kimchi fermented 4$^{\circ}C$ lost 77.3% of ascorbic acid after 30 days. Also reducing sugar contents decreased with storage time at 2$0^{\circ}C$ and 4$^{\circ}C$. The results of sensory evaluation showed that optimum ripening time of chamnamul kimchi was 1~3 days at 2$0^{\circ}C$ and more than 20 days at 4$^{\circ}C$.>.

• Journal of Life Science
• /
• v.30 no.3
• /
• pp.230-238
• /
• 2020

Carcass traits are the most economically important traits in Hanwoo (Korean cattle). Recently, the development of the field of genomics has made it possible to identify DNA markers for the genetic evaluation of carcass and meat quality traits in beef cattle. The objective of this study was to assess the genetic effects of single nucleotide polymorphism (SNP) markers related to carcass traits by field evaluations in a commercial Hanwoo population. We evaluated 15 SNP markers (TG g.371T>C, APM1 g.1454G>A, FABP4 g.2834C>G, FABP4 g.3533T>A, FABP4 g.3691G>A, SCD g.10153A>G, SCD g.10329T >C, CPE g.601T>C, EDG1 g.166A>G, NPY g.4271T>C, GPD1 g.2766C>T, PDE1B g.17122A>G, PDE1B g.17507A>C, TNNT1 g.6650C>T, and RORC g.20152A>G) related to carcass traits in Hanwoo. Genotyping of these SNP markers was performed using PCR-RFLP analysis in Hanwoo steers (n = 1,536) to evaluate their association with carcass traits. Seven SNPs, APM1 g.1454G>, FABP4 g.3691G>A, SCD g.10153A>G, CPE g.601T>C, PDE1B g.17122A>G, TNNT1 g.6650C>T, and RORC g.20152A>G, were significantly associated with carcass traits such as marbling score (MS), backfat thickness (BF), musculus longissimus dorsi area (LDA), carcass weight (CW), meat grade (MG), meat color (MC), and maturity score (MA). The results suggest that these SNPs may be used as DNA markers for the selection of Hanwoo with higher meat quality.

• The Korean Journal of Rheology
• /
• v.5 no.2
• /
• pp.161-169
• /
• 1993

Glucomannan(G.M.)은 Amorphophallus Konjac C. Koch의 tuber로부터 분리되었고. 이 G.M.은 다시 침전제로 메탄올을 사용하여 4단계로 분별되었다.(F.1, F.2, F.3, F.4,). 각분 별물에 비하여 직선으로부터 벗어남을 보였다. Low shear viscometer로 G.M. 용액의 viscosity를 측정하였고 농도와 zero shear specific viscosity의 logarithm을 도시한 결과 inflection point를 나타내었다. 이것은 G.M. 분자들의 coil overlap의 시작에서 기인한 것이 고 묽은 용액에서 진한 용액으로의 전이행동은 임계농도. C＊=4/[η]에서 일어났고 이때의 zero shear specific viscosity는 10을 나타내었다. 또한 specific viscosity는 묽은 용액에대해 서는 C14로써 변화하였고 진한 요액에서는 C3.0으로변화하였다. G.M.의 고체상태에 대한 유 전성($\varepsilon$＇,$\varepsilon$＂)과 점탄성(C＇,C＂)계수들을 액체질소 온도에서부터 15$0^{\circ}C$ 온도범위에 걸쳐 4단계로 film을 건조시키면서 10Hz에서 측정하였다. G.M. film의 유전성과 점탄성의 허수부 분은 ($\varepsilon$＂, C＂), -10$0^{\circ}C$에서 peak를 나타내었고 이 peak는 hydroxy methyl 기들의 회전 운동에서 생겨난 것이다. 건조시키지 않은 상태의 G.M. film의 유전성과 점탄성의 허수부분 의 값들은 -5$0^{\circ}C$에서 물 분자의 운동에 의하여 생긴 peak를 보였다.