• East Asian mathematical journal
• /
• v.32 no.5
• /
• pp.745-765
• /
• 2016

We propose coupled fixed point theorems for maps satisfying contractive conditions involving a rational expression in the setting of partially ordered metric spaces. We also present a result on the existence and uniqueness of coupled fixed points. In particular, it is shown that the results existing in the literature are extend, generalized, unify and improved by using mixed monotone property. Given to support the useability of our results, and to distinguish them from the known ones.

• Bulletin of the Korean Chemical Society
• /
• v.7 no.1
• /
• pp.12-15
• /
• 1986

Lead tolerance of $Pt/Al_2O_3$ catalysts was evaluated for CO oxidation depending on the properties of the alumina supports and base metals added as promoter. Among the four different alumina supports, the support with a large macropore volume (0.45 cc/g) and 5% Ce has shown the best resistence to lead poisoning. Most of the base metals added to the Pt-catalysts were found to be ineffective for improving lead resistence, but boron has shown an excellent lead tolerence, although it decreases the initial catalytic activity.

• Journal of Yeungnam Medical Science
• /
• v.36 no.3
• /
• pp.254-259
• /
• 2019

Pheochromocytoma (PCC) is a rare catecholamine-producing tumor with the incidence in hypertension of 0.1-0.6%. PCC crisis is an endocrine emergency that can lead to hemodynamic disturbance and organ failure such as catecholamine-induced cardiomyopathy. The circulatory collapse caused by it often requires mechanical support. The author reports an unusual case in which a patient who previously underwent surgery for malignant PCC developed catecholamine-induced cardiomyopathy, and successfully recovered using extracorporeal membrane oxygenation.

• Journal of applied mathematics & informatics
• /
• v.40 no.5_6
• /
• pp.1053-1071
• /
• 2022

The purpose of this article is to establish some fixed point theorems, a common fixed point theorem and a coincidence point theorem via contractive type condition in the framework of complete partial metric spaces and give some examples in support of our results. As an application to the results, we give some fixed point theorems for integral type contractive conditions. The results presented in this paper extend and generalize several results from the existing literature.

• The Pure and Applied Mathematics
• /
• v.30 no.3
• /
• pp.249-267
• /
• 2023

This manuscript is divided into three segments. In the first segment, we prove a unique common fixed point theorem satisfying generalized weak contraction on partially ordered metric spaces and also give an example to support our results presented here. In the second segment of the article, some common coupled fixed point results are derived from our main results. In the last segment, we investigate the solution of integral equation as an application. Our results generalize, extend and improve several well-known results of the existing literature.

• Kyungpook Mathematical Journal
• /
• v.63 no.1
• /
• pp.97-104
• /
• 2023

In the present paper, we characterize, for a class of almost Kenmotsu manifolds, those that admit quasi Yamabe solitons. We show that if a (k, 𝜇)'-almost Kenmotsu manifold admits a quasi Yamabe soliton (g, V, 𝜆, 𝛼) where V is pointwise collinear with 𝜉, then (1) V is a constant multiple of 𝜉, (2) V is a strict infinitesimal contact transformation, and (3) (£_Vh')X = 0 holds for any vector field X. We present an illustrative example to support the result.

• Journal of Environmental Health Sciences
• /
• v.38 no.2
• /
• pp.95-104
• /
• 2012

Objectives: The goal of this study was to investigate the relationships between proximity to an industrial complex and blood lead levels and urinary cadmium levels. Methods: We conducted a questionnaire survey and analyzed blood lead and urinary cadmium levels using Atomic Absorption Spectrometry (AAs). Data was analyzed using logistic regression analysis. All statistical analyses were conducted with SAS software version 9.2. The distance between the residence and an industrial complex was calculated through a Geographical Information System (GIS). Results: A total of 967 residents living near a large petrochemical complex in Ulsan participated. The geometric mean levels of blood lead and urinary cadmium were $1.70{\mu}g/dl$ (male: $1.77{\mu}g/dl$, female: $1.67{\mu}g/dl$), and $0.72{\mu}g/g$ creatinine (male: $0.49{\mu}g/g$ cr. female: $0.89{\mu}g/g$ cr.), respectively. Blood lead and urinary cadmium levels both increased with age and were higher among smokers compared to never smokers. Both significantly showed a decreasing trend with rising income. Results from multiple logistic regression analysis showed that urinary cadmium levels for subjects aged less than 20 years old were negatively associated with distance from the industrial area to the residence. The results, however, indicated that the blood lead levels were positively associated with the distance. Conclusions: The results of this study support that proximity to an industrial complex is related to urinary cadmium values for children. A positive finding with blood lead can be explained by the ambiguity of lead exposure sources in the general environment.

• Environmental Engineering Research
• /
• v.13 no.1
• /
• pp.19-27
• /
• 2008

Simultaneous removal of ternary gases of $NH_3$, $H_2S$ and toluene in a contaminated air stream was investigated over 180 days in a biofilter. A commercially available inorganic/polymeric composite chip with a large void volume (bed porosity > 0.80) was used as a microbial support. Multiple microorganisms including Nitrosomonas and Nitrobactor for nitrogen removal, Thiobacillus thioparus (ATCC 23645) for $H_2S$ removal and Pseudomonas aeruginosa (ATCC 15692), Pseudomonas putida (ATCC 17484) and Pseudomonas putida (ATCC 23973) for toluene removal were used simultaneously. The empty bed residence time (EBRT) ranged from 60 - 120 seconds and the inlet feed concentration was $0.0325\;g/m^3-0.0651\;g/m^3$ for $NH_3$, $0.0636\;g/m^3-0.141\;g/m^3$ for $H_2S$, and $0.0918\;g/m^3-0.383\;g/m^3$ for toluene, respectively. The observed removal efficiency was 2% - 98% for $NH_3$, 2% - 100% for $H^2S$, and 2% - 80% for toluene, respectively. Maximum elimination capacity was about $2.7\;g/m^3$/hr for $NH_3$, > $6.4\;g/m^3$/hr for $H_2S$ and $4.0\;g/m^3$/hr for toluene, respectively. The inorganic/polymeric composite carrier required 40 - 80 days of wetting time for biofilm formation due to the hydrophobic nature of the carrier. Once the surface of the carrier was completely wetted, the microbial activity became stable. During the long-term operation, pressure drop was negligible because the void volume of the carrier was two times higher than the conventional packing materials.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.21 no.2
• /
• pp.139-153
• /
• 2021

Background: In anesthetic techniques, touching bones can cause needle bending. Theoretically, a needle should support such deflection without fracturing. However, it is possible that a needle may fracture depending on the quality and type of needle used. This study evaluated the physical, chemical, and micromorphological characteristics of long and short dental anesthetic needles, as well as the mechanical properties of flexural load and bending resistance when needles are subjected to different bending angles. Methods: Long and short needles (30G, Jets, Misawa, Selekto, Terumo, Unoject and 27G, Dencojet, Injex, Jets, Misawa, Procare, Setoject XL, Terumo) were evaluated. Scanning electron microscopy was used to evaluate the needle bevels and energy-dispersive X-ray spectroscopy was used for the chemical analysis of needle compositions. Flexural loading and bending strength assessments were performed using a universal testing machine by bending the needles (n = 5) to angles of 30°, 60°, or 90°, or until fracture occurred. Results: The Injex 27G, Jets 27G, and Septoject XL 27G needles were all less than 30 mm in length. There were small percentage variations in the chemical compositions of the needles. Superior smoothness was observed for the Unoject 30G needle, which exhibited the highest fracture resistance at 60°. The Jets 30G needle exhibited greater resistance to fractures at 90°. The Procare 27G needle exhibited the highest load resistance to bending, followed by the Septoject XL 27G needle, and both needles were tied for the lowest fracture resistance. No needle fractured when bent to 30° or at less than three bends to 60° or 90°. Conclusions: Greater needle resistance to bending increases the probability of early fracturing. Thinner and shorter needles are more resistant than longer and thicker needles. Performing a single bend does not result in any significant risk of fracture or obliterate the lumen, allowing for the continued passage of anesthetic liquid.

• ETRI Journal
• /
• v.45 no.5
• /
• pp.781-794
• /
• 2023

Uncrewed aerial vehicles (UAVs) have become a vital element in nonterrestrial networks, especially with respect to 5G communication systems and beyond. The use of UAVs in support of 4G/5G base station (uncrewed aerial vehicle base station [UAV-BS]) has proven to be a practical solution for extending cellular network services to areas where conventional infrastructures are unavailable. In this study, we introduce a UAV-BS system that utilizes a high-capacity wireless backhaul operating in millimeter-wave frequency bands. This system can achieve a maximum throughput of 1.3 Gbps while delivering data at a rate of 300 Mbps, even at distances of 10 km. We also present the details of our testbed implementation alongside the performance results obtained from field tests.