• 한국ITS학회:학술대회논문집
• /
• 한국ITS학회 2006년도 제5회 추계학술대회 및 정기총회
• /
• pp.108-112
• /
• 2006

• 한국표면공학회지
• /
• 제56권4호
• /
• pp.283-287
• /
• 2023

The structures for road safety are guard rails that protect the cars and passengers. If an accident occurs on the roads after a long period of installation, it may escalate into a major disaster. In order to repair many guard rails, the existing repair method of replacing them with new ones requires enormous financial resources. To solve this problem, the G-SAVE method was developed to repair the guard rail without replacing them. This method removes the rust on the surface of the guard rail and then performs ambient-dip galvanizing coating on it without replacing the new ones. No studies or reports have yet been made on the risk assessment of harmful substances, vehicles for these entire processes. Therefore, this paper focuses on risk assessment using the PHA (Preliminary Hazard Analysis) technique and conducts risk assessment for concept design stage of the coating vehicles.

• 대한간호
• /
• 제10권4호통권54호
• /
• pp.62-63
• /
• 1971

• 한국통신학회논문지
• /
• 제31권10A호
• /
• pp.1003-1013
• /
• 2006

IEEE802.11g VoWLAN (Voice over Wireless LAN) 단말기는 802.11b 전용 단말기에 비해 통화시간이 30 % 이상 감소하는 문제점이 있어 통화시간이 문제로 대두되고 있다. 일반적으로, 802.11g에서는 멀티캐리어 방식인 OFDM (Orthogonal Frequency Division Multiplexing) 변조방식을 사용하여 54 Mbps속도로 전송하기 때문에 기존의 802.11b MAC (Medium Access Control) 전송방식과 비교하여 통화시간을 만족시키는 것이 어렵다. 본 논문에서는 802.11g 규격을 적용한 단말기에서 통화중 Power Save 방법으로 Holdover Time을 처음으로 제안하므로 통화시간을 만족시킨다. 다만, 통화 단말기 수 증가에 따른 네트워크 혼잡으로 경합 창 (contention window)이 많이 발생하여, Back-off 수 증가로 인한 통화품질(QoS)의 문제가 발생하지만, QoS 해결 방안으로 다운 링크 시 802.11 G.711 Sequence Number를 단말기 MAC 단에서 분석하여 손실율에 따른 Holdover Time을 가변 하는 방법을 제안하므로 이 문제를 해결한다. 802.11b/g 소비전류 분석과 통화 단말기 증가에 따른 네트워크 혼잡에 의한 MAC 파라미터 성능을 분석하며, VQT장비와AiroPeek를 이용하여 실제적인 데이터를 분석한다.

• 수산해양교육연구
• /
• 제22권4호
• /
• pp.604-610
• /
• 2010

Busan subway transportation system has been established a key role in the society last 20 years. However many people are suffering from hot and humid environment at subway station and platform due to deteriorated ventilation system as well as insufficient air conditioning system in existing stations and platforms. As a result, these systems require revitalization. There is about 5400tons of low temperature underground water is generated from subway stations every day. By using this method and air washer we are trying to lower the temperature. Air washer is commonly used for removing humidity but in this experiment it will be used as air precooling. This research offers result of experiment using air washer system to lower the temperature in large spaces like subway station. The experiment result has shown when L/G was the same, at condition which water spray temperature at $18^{\circ}C$ resulting inlet and outlet temperature difference larger. Also, in the same water spray temperature conditions, larger L/G condition showed a greater temperature difference. LCC evaluation of both system were shown that air washer system of using underground water will save 53% of the initial cost than refrigeration system, and save 75% of operating cost.

• 한국작물학회지
• /
• 제50권1호
• /
• pp.55-59
• /
• 2005

Rice farmers can save labor and expenses by using expanded rice husk (ERH) as a seedling medium since ERH is lighter and cheaper than other commercial seedling media (CSM). This study was carried out to develop a method for rice seedling cultivation using ERH as a seedling medium. It is suggested that a mixture of $60\%$ of ERH and $40\%$ of a CSM could be used as a seedling medium; the planting densities would be 240g per tray for infant seedlings and 200 g for young seedlings; and nitrogen (N) would be applied at a rate of 1g per tray for infant seedlings prior to planting and 2g per tray for young seedlings with division. Great care should be taken to use $CO(NH_2)_2$ as an N-source fertilizer. These results would lay a foundation for the rice seedling cultivation with ERH as a medium.

• Transactions on Control, Automation and Systems Engineering
• /
• 제1권2호
• /
• pp.141-146
• /
• 1999

This paper describes the communication method of an auto-startup system. The Auto-Startup system is designed to operate a nuclear power plant automatically during the startup operation . In general , the operations during startup in existing plant have only been manually controlled by the operator. The manual operation caused to the operator mistake. The Auto-Startup system consists of the Distributed Control System(DCS) and G2 (Expert System). Also, Functional Test Facility(FTF) provides the plant's real-data for an Auto-Startup system. So, it is necessary to develop the communication method between these systems. We developed two methods ; one is a network and the other is a hardwire line. To communicate between these systems (DCS-G2 and DCS-FTF) , we developed the communication program. In case of DCS-FTF, we used the TCP/IP and VXI. BUt, in case of DCS-G2 , we , what it called , developed the bridge program using the GSI(G2 Standard Interface). We test to check the function of the important parameter, in time, for analysis of the developed communication method. The results are a good performance when we check the communication time of important parameter. We conclude that Auto-startup system could save heat-up time about at least 5 hours and reduced the change of the reactor operation and trip.

• Journal of Chest Surgery
• /
• 제33권5호
• /
• pp.432-435
• /
• 2000

We report a case of primary undifferentiated cardiac sarcoma. The tumor originated from the left atrial free wall with multi-organ metastases, e.g., lung, and adrenal gland. The patient gradually grew worse with dyspnea and hemoptysis because of the obstructed left atrial outflow. Surgical resection of the left atrial sarcoma was undertaken to save the patient's life, followed by chemotherapy and brain irradiation as adjuvant therapy. The prognosis of cardiac sarcoma with metastases is very poor. However, in patients with hemodynamic instability, surgical intervention could be a therapeutic modality as palliation.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.625-626
• /
• 2006

Nowadays, the increasing global competition forces manufacturing enterprises to apply new technologies method of their products. To save time and cost in assembly process and to increase the quality of products, it is very important to choose an optimal assembly system. We propose a methodology that generates an optimal assembly system by using the Digital manufacturing.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권2호
• /
• pp.369-390
• /
• 2023

Technologies for disaster management are highly sought areas for research and commercial deployment. Landslides, Flood, cyclones, earthquakes, forest fires and road/train accidents are some causes of disasters. Capturing video and accessing data in real time from the disaster site can help first responders make split second decisions which may save human lives and valuable resource destructions. In this context the communication technologies performing the task should have high bandwidth and low latency which only 5G can deliver. But unfortunately in India, deployment of the 5G mobile communication systems is yet to give a shape and again in remote areas unavailability of 4G signals is still severe. In this situation the authors have proposed, simulated and experimented a 4G-5G communication scheme where from the disaster site the signals will be transmitted by a 5G terminal to a nearby 4G-5G gateway installed in a mobile vehicle. The received 5G signal will be further relayed by the 4G-5G gateway to the fixed 4G base station for onward transmission towards the disaster management station for decision making, deployment and relief monitoring. The 4G-5G gateway acts as a relay and converter of 5G signal to 4G signal and vice versa. This relayed system can be further mounted on a vehicle mounted relay (VMR) as proposed by 3GPP in Release 18. The scheme is also in the same line of context with Verizon's, "Tactical Humanitarian Operations Response" (THOR) vehicle concept. The performance of the link is studied in different channel conditions, the throughput achieved is superb. The authors have implemented the above mentioned system towards smart campus networking and monitoring landslides activities which are common in their regions.